Back to Overview

List of Commands for OS version hpe@arubacx
| TASK | COMMAND | TRANSPORT | NOTES |
|---|---|---|---|
| AAA | show aaa accounting | CLI | |
| AAA | show aaa authentication | CLI | |
| AAA | show aaa authorization | CLI | |
| AAA | show aaa server-groups | CLI | |
| ACL | show running-config | CLI | |
| ARP | GET /network-monitoring/v1/switches/<serial-number>/vlans | API | Aruba New Central; both spellings run over the showCommands runner, the bare one as a fallback where the device rejects all-vrfs. The running-config and the VLAN endpoint are l3Interfaces dependencies, read to keep only entries on an interface it emits |
| ARP | POST /network-troubleshooting/v1/cx/<serial-number>/showCommands | API | Aruba New Central; both spellings run over the showCommands runner, the bare one as a fallback where the device rejects all-vrfs. The running-config and the VLAN endpoint are l3Interfaces dependencies, read to keep only entries on an interface it emits |
| ARP | show arp | CLIAPI | API: Aruba New Central; both spellings run over the showCommands runner, the bare one as a fallback where the device rejects all-vrfs. The running-config and the VLAN endpoint are l3Interfaces dependencies, read to keep only entries on an interface it emits |
| ARP | show arp all-vrfs | CLIAPI | API: Aruba New Central; both spellings run over the showCommands runner, the bare one as a fallback where the device rejects all-vrfs. The running-config and the VLAN endpoint are l3Interfaces dependencies, read to keep only entries on an interface it emits |
| ARP | show running-config | API | Aruba New Central; both spellings run over the showCommands runner, the bare one as a fallback where the device rejects all-vrfs. The running-config and the VLAN endpoint are l3Interfaces dependencies, read to keep only entries on an interface it emits |
| BGP neighbors | show bgp all-vrf all neighbors | CLI | |
| BGP neighbors | show bpg all neighbors | CLI | |
| Configuration saved | show running-config | CLI | |
| Configuration saved | show startup-config | CLI | |
| Current config | POST /network-troubleshooting/v1/cx/<serial-number>/showCommands | API | |
| Current config | show running-config | CLIAPI | |
| Device info | GET /network-monitoring/v1/devices | API | the tasker builds the ver from this call; the task sends no request of its own |
| Device info | show boot-history | CLI | |
| Device info | show images | CLI | |
| Device info | show lldp local-device | CLI | |
| Device info | show module | CLI | |
| Device info | show system | CLI | |
| Device info | top memory | CLI | |
| DHCPv4 Relays | show dhcp-relay | CLI | |
| DHCPv4 Relays | show ip helper-address | CLI | |
| Disable pagination | no page | CLI | |
| DNS resolver | show ip dns | CLI | |
| FHRP | show interface | CLI | |
| FHRP | show vrrp | CLI | |
| IGMP | show ip igmp all-vrfs | CLI | |
| IGMP | show ip igmp groups all-vrfs | CLI | |
| IGMP | show running-config | CLI | |
| IGMP Snooping | show ip igmp snooping | CLI | |
| IGMP Snooping | show ip igmp snooping detail | CLI | |
| Initial device discovery | GET /network-monitoring/v1/devices | API | the tasker builds the ver from these calls; an MSP login first lists tenants with GET /workspaces/v1/msp-tenants |
| Initial device discovery | GET /network-monitoring/v1/switches | API | the tasker builds the ver from these calls; an MSP login first lists tenants with GET /workspaces/v1/msp-tenants |
| Initial device discovery | show system | CLI | |
| IPv6 Neighbor Discovery | GET /network-monitoring/v1/switches/<serial-number>/vlans | API | Aruba New Central; both neighbor spellings run over the showCommands runner, the bare one as a fallback where the per-serial allow-list refuses all-vrfs. The VLAN endpoint and the running-config are read to keep only neighbours on an interface l3Interfaces also emits |
| IPv6 Neighbor Discovery | POST /network-troubleshooting/v1/cx/<serial-number>/showCommands | API | Aruba New Central; both neighbor spellings run over the showCommands runner, the bare one as a fallback where the per-serial allow-list refuses all-vrfs. The VLAN endpoint and the running-config are read to keep only neighbours on an interface l3Interfaces also emits |
| IPv6 Neighbor Discovery | show ipv6 neighbors | API | Aruba New Central; both neighbor spellings run over the showCommands runner, the bare one as a fallback where the per-serial allow-list refuses all-vrfs. The VLAN endpoint and the running-config are read to keep only neighbours on an interface l3Interfaces also emits |
| IPv6 Neighbor Discovery | show ipv6 neighbors all-vrfs | API | Aruba New Central; both neighbor spellings run over the showCommands runner, the bare one as a fallback where the per-serial allow-list refuses all-vrfs. The VLAN endpoint and the running-config are read to keep only neighbours on an interface l3Interfaces also emits |
| IPv6 Neighbor Discovery | show running-config | API | Aruba New Central; both neighbor spellings run over the showCommands runner, the bare one as a fallback where the per-serial allow-list refuses all-vrfs. The VLAN endpoint and the running-config are read to keep only neighbours on an interface l3Interfaces also emits |
| L2 Interfaces | GET /network-monitoring/v1/switches/<serial-number>/interfaces | API | physical ports and LAGs from the API, VLAN interfaces, loopbacks, per-port MACs and counters from the CLI; any other l3Interfaces row gets a name-only row in state unknown |
| L2 Interfaces | GET /network-monitoring/v1/switches/<serial-number>/lag | API | physical ports and LAGs from the API, VLAN interfaces, loopbacks, per-port MACs and counters from the CLI; any other l3Interfaces row gets a name-only row in state unknown |
| L2 Interfaces | GET /network-monitoring/v1/switches/<serial-number>/vlans | API | physical ports and LAGs from the API, VLAN interfaces, loopbacks, per-port MACs and counters from the CLI; any other l3Interfaces row gets a name-only row in state unknown |
| L2 Interfaces | POST /network-troubleshooting/v1/cx/<serial-number>/showCommands | API | physical ports and LAGs from the API, VLAN interfaces, loopbacks, per-port MACs and counters from the CLI; any other l3Interfaces row gets a name-only row in state unknown |
| L2 Interfaces | show interface | CLIAPI | API: physical ports and LAGs from the API, VLAN interfaces, loopbacks, per-port MACs and counters from the CLI; any other l3Interfaces row gets a name-only row in state unknown |
| L2 Interfaces | show interface mgmt | CLI | |
| L2 Interfaces | show running-config | API | physical ports and LAGs from the API, VLAN interfaces, loopbacks, per-port MACs and counters from the CLI; any other l3Interfaces row gets a name-only row in state unknown |
| L3 Interfaces | GET /network-monitoring/v1/switches/<serial-number>/vlans | API | the VLAN endpoint reports one primary IPv4 per VLAN, so the running-config supplies secondaries, loopbacks, IPv6 and mgmt |
| L3 Interfaces | POST /network-troubleshooting/v1/cx/<serial-number>/showCommands | API | the VLAN endpoint reports one primary IPv4 per VLAN, so the running-config supplies secondaries, loopbacks, IPv6 and mgmt |
| L3 Interfaces | show interface | CLI | |
| L3 Interfaces | show interface mgmt | CLI | |
| L3 Interfaces | show ip interface | CLI | |
| L3 Interfaces | show ip interface all-vrfs | CLI | |
| L3 Interfaces | show running-config | API | the VLAN endpoint reports one primary IPv4 per VLAN, so the running-config supplies secondaries, loopbacks, IPv6 and mgmt |
| L3 Interfaces | show vrrp | CLI | |
| Link aggregations | GET /network-monitoring/v1/switches/<serial-number>/interfaces | API | Aruba New Central. The LAG endpoint reports no protocol (type is null on LACP aggregates too), so poProto is empty; the channel state is derived - up when a member is up |
| Link aggregations | GET /network-monitoring/v1/switches/<serial-number>/lag | API | Aruba New Central. The LAG endpoint reports no protocol (type is null on LACP aggregates too), so poProto is empty; the channel state is derived - up when a member is up |
| Link aggregations | show interface | CLI | |
| Link aggregations | show interface lag | CLI | |
| Link aggregations | show lacp interfaces multi-chassis | CLI | |
| Link aggregations | show vsx brief | CLI | |
| Link aggregations | show vsx status | CLI | |
| MAC | GET /network-monitoring/v1/switches/<serial-number>/interfaces | API | Aruba New Central; the show command runs over the showCommands runner. The other commands are l2Interfaces dependencies, read to keep only entries on an interface it emits |
| MAC | GET /network-monitoring/v1/switches/<serial-number>/lag | API | Aruba New Central; the show command runs over the showCommands runner. The other commands are l2Interfaces dependencies, read to keep only entries on an interface it emits |
| MAC | GET /network-monitoring/v1/switches/<serial-number>/vlans | API | Aruba New Central; the show command runs over the showCommands runner. The other commands are l2Interfaces dependencies, read to keep only entries on an interface it emits |
| MAC | POST /network-troubleshooting/v1/cx/<serial-number>/showCommands | API | Aruba New Central; the show command runs over the showCommands runner. The other commands are l2Interfaces dependencies, read to keep only entries on an interface it emits |
| MAC | show interface | API | Aruba New Central; the show command runs over the showCommands runner. The other commands are l2Interfaces dependencies, read to keep only entries on an interface it emits |
| MAC | show interface vxlan vni | CLI | |
| MAC | show interface vxlan vteps detail | CLI | |
| MAC | show ip interface brief | CLI | |
| MAC | show mac-address-table | CLIAPI | API: Aruba New Central; the show command runs over the showCommands runner. The other commands are l2Interfaces dependencies, read to keep only entries on an interface it emits |
| MAC | show running-config | API | Aruba New Central; the show command runs over the showCommands runner. The other commands are l2Interfaces dependencies, read to keep only entries on an interface it emits |
| MROUTE | show ip mroute all-vrfs | CLI | |
| Neighbors | show cdp neighbor info | CLI | |
| Neighbors | show cdp neighbor info <intName> | CLI | |
| Neighbors | show lldp neighbor info | CLI | |
| Neighbors | show lldp neighbor info <intName> | CLI | |
| NTP | show ntp associations | CLI | |
| OSPF | show ip ospf all-vrfs | CLI | |
| OSPF | show ip ospf interface | CLI | |
| OSPF | show ip ospf interface all-vrfs | CLI | |
| OSPF | show ip ospf neighbors detail | CLI | |
| OSPF | show ip ospf neighbors detail all-vrfs | CLI | |
| PIM | show ip pim bsr all-vrfs | CLI | |
| PIM | show ip pim interface all-vrfs | CLI | |
| PIM | show ip pim neighbor all-vrfs | CLI | |
| PIM | show ip pim rp-set all-vrfs | CLI | |
| Policy-based Routing | show running-config | CLI | |
| Power supplies & fans | show environment | CLI | |
| Power supplies & fans | show system | CLI | |
| Route summary | show ip route summary | CLI | |
| Route summary | show ip route summary all-vrfs | CLI | |
| Routing table | GET /network-monitoring/v1/switches/<serial-number>/vlans | API | Aruba New Central, over the showCommands runner. show ip route is the fallback when all-vrfs is refused (refused itself on the CX-6200F; same fallback as the arp runner). show running-config supplies the mgmt default gateway; with the VLAN endpoint it is the l3Interfaces dependency that CEF entries are filtered against |
| Routing table | POST /network-troubleshooting/v1/cx/<serial-number>/showCommands | API | Aruba New Central, over the showCommands runner. show ip route is the fallback when all-vrfs is refused (refused itself on the CX-6200F; same fallback as the arp runner). show running-config supplies the mgmt default gateway; with the VLAN endpoint it is the l3Interfaces dependency that CEF entries are filtered against |
| Routing table | show interface mgmt | CLI | |
| Routing table | show interface vxlan vni | CLI | |
| Routing table | show interface vxlan vteps detail | CLI | |
| Routing table | show ip interface brief | CLI | |
| Routing table | show ip route | CLIAPI | API: Aruba New Central, over the showCommands runner. show ip route is the fallback when all-vrfs is refused (refused itself on the CX-6200F; same fallback as the arp runner). show running-config supplies the mgmt default gateway; with the VLAN endpoint it is the l3Interfaces dependency that CEF entries are filtered against |
| Routing table | show ip route <protocolName> | CLI | |
| Routing table | show ip route <protocolName> all-vrfs | CLI | |
| Routing table | show ip route all-vrfs | CLIAPI | API: Aruba New Central, over the showCommands runner. show ip route is the fallback when all-vrfs is refused (refused itself on the CX-6200F; same fallback as the arp runner). show running-config supplies the mgmt default gateway; with the VLAN endpoint it is the l3Interfaces dependency that CEF entries are filtered against |
| Routing table | show ip route summary | CLI | |
| Routing table | show ip route summary all-vrfs | CLI | |
| Routing table | show running-config | API | Aruba New Central, over the showCommands runner. show ip route is the fallback when all-vrfs is refused (refused itself on the CX-6200F; same fallback as the arp runner). show running-config supplies the mgmt default gateway; with the VLAN endpoint it is the l3Interfaces dependency that CEF entries are filtered against |
| Secured access ports | show port-access clients detail | CLI | |
| SN | GET /network-monitoring/v1/devices | API | the tasker builds the ver from this call; the task sends no request of its own |
| SN | show system | CLI | |
| SNMP | show running-config | CLI | |
| Stacking | show vsf detail | CLI | |
| Stacking | show vsf link | CLI | |
| Startup config | show startup-config | CLI | |
| STP | POST /network-troubleshooting/v1/cx/<serial-number>/showCommands | API | Aruba New Central. RPVST root cost comes only from show spanning-tree summary root, refused by the lab CX-6200F allow-list |
| STP | show spanning-tree detail | CLIAPI | API: Aruba New Central. RPVST root cost comes only from show spanning-tree summary root, refused by the lab CX-6200F allow-list |
| STP | show spanning-tree mst detail | CLIAPI | API: Aruba New Central. RPVST root cost comes only from show spanning-tree summary root, refused by the lab CX-6200F allow-list |
| STP | show spanning-tree summary root | CLIAPI | API: Aruba New Central. RPVST root cost comes only from show spanning-tree summary root, refused by the lab CX-6200F allow-list |
| STP | show vlan | CLIAPI | API: Aruba New Central. RPVST root cost comes only from show spanning-tree summary root, refused by the lab CX-6200F allow-list |
| Syslog | show running-config | CLI | |
| Transceivers | show interface transceiver detail | CLI | |
| Vlan | GET /network-monitoring/v1/switches/<serial-number>/vlans | API | Aruba New Central; id, name and operational status |
| Vlan | show vlan | CLI | |
| VRF | show vrf | CLI | |
| VXLAN | show interface vxlan vni | CLI | |
| VXLAN | show interface vxlan vteps detail | CLI | |
| VXLAN | show ip interface | CLI | |
| VXLAN | show ip interface all-vrfs | CLI |