Back to Overview

List of Commands for OS version hpe@arubasw
| TASK | COMMAND | TRANSPORT | NOTES |
|---|---|---|---|
| AAA | show password-configuration | CLI | |
| ARP | GET /network-monitoring/v1/switches/<serial-number>/vlans | API | Aruba New Central; one show arp vlan per SVI l3Interfaces emits, over the showCommands runner. The running-config, show oobm ip and the VLAN endpoint are its dependencies, read to keep only entries on an interface it emits |
| ARP | POST /network-troubleshooting/v1/aos-s/<serial-number>/showCommands | API | Aruba New Central; one show arp vlan per SVI l3Interfaces emits, over the showCommands runner. The running-config, show oobm ip and the VLAN endpoint are its dependencies, read to keep only entries on an interface it emits |
| ARP | show arp | CLI | |
| ARP | show arp vlan <vlanId> | API | Aruba New Central; one show arp vlan per SVI l3Interfaces emits, over the showCommands runner. The running-config, show oobm ip and the VLAN endpoint are its dependencies, read to keep only entries on an interface it emits |
| ARP | show ip | CLI | |
| ARP | show mac-address vlan <vlanId> | CLI | |
| ARP | show oobm ip | API | Aruba New Central; one show arp vlan per SVI l3Interfaces emits, over the showCommands runner. The running-config, show oobm ip and the VLAN endpoint are its dependencies, read to keep only entries on an interface it emits |
| ARP | show running-config | CLIAPI | API: Aruba New Central; one show arp vlan per SVI l3Interfaces emits, over the showCommands runner. The running-config, show oobm ip and the VLAN endpoint are its dependencies, read to keep only entries on an interface it emits |
| ARP | show vlans | CLI | |
| Configuration saved | show config | CLI | |
| Configuration saved | show running-config | CLI | |
| Current config | POST /network-troubleshooting/v1/aos-s/<serial-number>/showCommands | API | |
| Current config | show running-config | CLIAPI | |
| Device info | GET /network-monitoring/v1/devices | API | the tasker builds the ver from this call; the task sends no request of its own |
| Device info | show console | CLI | the members of a 5400R chassis are collected by "show vsf detail", the rest of the family uses "show stacking" |
| Device info | show lldp info local-device | CLI | the members of a 5400R chassis are collected by "show vsf detail", the rest of the family uses "show stacking" |
| Device info | show modules | CLI | the members of a 5400R chassis are collected by "show vsf detail", the rest of the family uses "show stacking" |
| Device info | show stacking | CLI | the members of a 5400R chassis are collected by "show vsf detail", the rest of the family uses "show stacking" |
| Device info | show system | CLI | the members of a 5400R chassis are collected by "show vsf detail", the rest of the family uses "show stacking" |
| Device info | show tech buffer | CLI | the members of a 5400R chassis are collected by "show vsf detail", the rest of the family uses "show stacking" |
| Device info | show vsf detail | CLI | the members of a 5400R chassis are collected by "show vsf detail", the rest of the family uses "show stacking" |
| DHCPv4 Relays | show dhcp-relay | CLI | |
| DHCPv4 Relays | show ip helper-address | CLI | |
| DHCPv4 Snooping | show dhcp-snooping | CLI | |
| DHCPv4 Snooping | show dhcp-snooping binding | CLI | |
| DHCPv4 Snooping | show dhcp-snooping stats | CLI | |
| Disable pagination | no page | CLI | |
| DNS resolver | show ip dns | CLI | |
| FHRP | show ip | CLI | |
| FHRP | show run | CLI | |
| FHRP | show vrrp | CLI | |
| FHRP | show vrrp vlan <vlan> vrid <vrid> config | CLI | |
| Initial device discovery | GET /network-monitoring/v1/devices | API | the tasker builds the ver from these calls; an MSP login first lists tenants with GET /workspaces/v1/msp-tenants |
| Initial device discovery | GET /network-monitoring/v1/switches | API | the tasker builds the ver from these calls; an MSP login first lists tenants with GET /workspaces/v1/msp-tenants |
| Initial device discovery | show lldp info local-device | CLI | |
| Initial device discovery | show modules | CLI | |
| Initial device discovery | show stacking | CLI | |
| Initial device discovery | show tech buffers | CLI | |
| Initial device discovery | show version | CLI | |
| L2 Interfaces | GET /network-monitoring/v1/switches/<serial-number>/interfaces | API | physical ports and LAGs from the API, VLAN interfaces, loopbacks, oobm, per-port MACs and counters from the CLI; any other l3Interfaces row gets a name-only row in state unknown |
| L2 Interfaces | GET /network-monitoring/v1/switches/<serial-number>/lag | API | physical ports and LAGs from the API, VLAN interfaces, loopbacks, oobm, per-port MACs and counters from the CLI; any other l3Interfaces row gets a name-only row in state unknown |
| L2 Interfaces | GET /network-monitoring/v1/switches/<serial-number>/vlans | API | physical ports and LAGs from the API, VLAN interfaces, loopbacks, oobm, per-port MACs and counters from the CLI; any other l3Interfaces row gets a name-only row in state unknown |
| L2 Interfaces | POST /network-troubleshooting/v1/aos-s/<serial-number>/showCommands | API | physical ports and LAGs from the API, VLAN interfaces, loopbacks, oobm, per-port MACs and counters from the CLI; any other l3Interfaces row gets a name-only row in state unknown |
| L2 Interfaces | show interfaces all | CLIAPI | API: physical ports and LAGs from the API, VLAN interfaces, loopbacks, oobm, per-port MACs and counters from the CLI; any other l3Interfaces row gets a name-only row in state unknown |
| L2 Interfaces | show interfaces brief | CLI | |
| L2 Interfaces | show ip | CLIAPI | API: physical ports and LAGs from the API, VLAN interfaces, loopbacks, oobm, per-port MACs and counters from the CLI; any other l3Interfaces row gets a name-only row in state unknown |
| L2 Interfaces | show ip route | API | physical ports and LAGs from the API, VLAN interfaces, loopbacks, oobm, per-port MACs and counters from the CLI; any other l3Interfaces row gets a name-only row in state unknown |
| L2 Interfaces | show lldp info local-device | CLIAPI | API: physical ports and LAGs from the API, VLAN interfaces, loopbacks, oobm, per-port MACs and counters from the CLI; any other l3Interfaces row gets a name-only row in state unknown |
| L2 Interfaces | show oobm | CLIAPI | API: physical ports and LAGs from the API, VLAN interfaces, loopbacks, oobm, per-port MACs and counters from the CLI; any other l3Interfaces row gets a name-only row in state unknown |
| L2 Interfaces | show oobm ip | API | physical ports and LAGs from the API, VLAN interfaces, loopbacks, oobm, per-port MACs and counters from the CLI; any other l3Interfaces row gets a name-only row in state unknown |
| L2 Interfaces | show run | CLI | |
| L2 Interfaces | show running-config | API | physical ports and LAGs from the API, VLAN interfaces, loopbacks, oobm, per-port MACs and counters from the CLI; any other l3Interfaces row gets a name-only row in state unknown |
| L2 Interfaces | show vlans | CLIAPI | API: physical ports and LAGs from the API, VLAN interfaces, loopbacks, oobm, per-port MACs and counters from the CLI; any other l3Interfaces row gets a name-only row in state unknown |
| L2 Interfaces | show vlans <id> | CLI | |
| L2 Interfaces | show vlans ports all detail | CLI | |
| L3 Interfaces | GET /network-monitoring/v1/switches/<serial-number>/vlans | API | the VLAN endpoint reports one primary IPv4 per VLAN, so the running-config supplies secondaries and loopbacks (IPv4 only) |
| L3 Interfaces | POST /network-troubleshooting/v1/aos-s/<serial-number>/showCommands | API | the VLAN endpoint reports one primary IPv4 per VLAN, so the running-config supplies secondaries and loopbacks (IPv4 only) |
| L3 Interfaces | show ip | CLI | |
| L3 Interfaces | show oobm ip | CLIAPI | API: the VLAN endpoint reports one primary IPv4 per VLAN, so the running-config supplies secondaries and loopbacks (IPv4 only) |
| L3 Interfaces | show run | CLI | |
| L3 Interfaces | show running-config | API | the VLAN endpoint reports one primary IPv4 per VLAN, so the running-config supplies secondaries and loopbacks (IPv4 only) |
| L3 Interfaces | show vlans | CLI | |
| L3 Interfaces | show vrrp | CLI | |
| L3 Interfaces | show vrrp vlan <vlan> vrid <vrid> config | CLI | |
| Link aggregations | GET /network-monitoring/v1/switches/<serial-number>/interfaces | API | Aruba New Central. The LAG endpoint reports no protocol (type is null on LACP aggregates too), so poProto is empty; the channel state is derived - up when a member is up |
| Link aggregations | GET /network-monitoring/v1/switches/<serial-number>/lag | API | Aruba New Central. The LAG endpoint reports no protocol (type is null on LACP aggregates too), so poProto is empty; the channel state is derived - up when a member is up |
| Link aggregations | show interfaces brief | CLI | |
| Link aggregations | show trunks | CLI | |
| MAC | GET /network-monitoring/v1/switches/<serial-number>/interfaces | API | Aruba New Central; the show command runs over the showCommands runner. The other commands are l2Interfaces dependencies, read to keep only entries on an interface it emits |
| MAC | GET /network-monitoring/v1/switches/<serial-number>/lag | API | Aruba New Central; the show command runs over the showCommands runner. The other commands are l2Interfaces dependencies, read to keep only entries on an interface it emits |
| MAC | GET /network-monitoring/v1/switches/<serial-number>/vlans | API | Aruba New Central; the show command runs over the showCommands runner. The other commands are l2Interfaces dependencies, read to keep only entries on an interface it emits |
| MAC | POST /network-troubleshooting/v1/aos-s/<serial-number>/showCommands | API | Aruba New Central; the show command runs over the showCommands runner. The other commands are l2Interfaces dependencies, read to keep only entries on an interface it emits |
| MAC | show interfaces all | API | Aruba New Central; the show command runs over the showCommands runner. The other commands are l2Interfaces dependencies, read to keep only entries on an interface it emits |
| MAC | show ip | API | Aruba New Central; the show command runs over the showCommands runner. The other commands are l2Interfaces dependencies, read to keep only entries on an interface it emits |
| MAC | show ip route | API | Aruba New Central; the show command runs over the showCommands runner. The other commands are l2Interfaces dependencies, read to keep only entries on an interface it emits |
| MAC | show lldp info local-device | API | Aruba New Central; the show command runs over the showCommands runner. The other commands are l2Interfaces dependencies, read to keep only entries on an interface it emits |
| MAC | show mac-address | CLIAPI | API: Aruba New Central; the show command runs over the showCommands runner. The other commands are l2Interfaces dependencies, read to keep only entries on an interface it emits |
| MAC | show mac-address vlan <vlanId> | CLI | |
| MAC | show oobm | API | Aruba New Central; the show command runs over the showCommands runner. The other commands are l2Interfaces dependencies, read to keep only entries on an interface it emits |
| MAC | show oobm ip | API | Aruba New Central; the show command runs over the showCommands runner. The other commands are l2Interfaces dependencies, read to keep only entries on an interface it emits |
| MAC | show running-config | API | Aruba New Central; the show command runs over the showCommands runner. The other commands are l2Interfaces dependencies, read to keep only entries on an interface it emits |
| MAC | show vlans | CLIAPI | API: Aruba New Central; the show command runs over the showCommands runner. The other commands are l2Interfaces dependencies, read to keep only entries on an interface it emits |
| Neighbors | show cdp neighbors | CLI | |
| Neighbors | show lldp info remote-device | CLI | |
| Neighbors | show lldp info remote-device <intName> | CLI | |
| Neighbors | show lldp info remote-device detail | CLI | |
| NTP | show ntp associations | CLI | |
| OSPF | show ip | CLI | |
| OSPF | show ip ospf interface | CLI | |
| OSPF | show ip ospf interface <ipAddress> | CLI | |
| OSPF | show ip ospf neighbor detail | CLI | |
| OSPF | show running-config | CLI | |
| Routing table | GET /network-monitoring/v1/switches/<serial-number>/vlans | API | Aruba New Central; the show commands run over the showCommands runner. show running-config and the VLAN endpoint are l3Interfaces dependencies, read to keep only CEF entries on an interface it emits |
| Routing table | POST /network-troubleshooting/v1/aos-s/<serial-number>/showCommands | API | Aruba New Central; the show commands run over the showCommands runner. show running-config and the VLAN endpoint are l3Interfaces dependencies, read to keep only CEF entries on an interface it emits |
| Routing table | show ip route | CLIAPI | API: Aruba New Central; the show commands run over the showCommands runner. show running-config and the VLAN endpoint are l3Interfaces dependencies, read to keep only CEF entries on an interface it emits |
| Routing table | show ipv6 route | API | Aruba New Central; the show commands run over the showCommands runner. show running-config and the VLAN endpoint are l3Interfaces dependencies, read to keep only CEF entries on an interface it emits |
| Routing table | show oobm ip | CLIAPI | API: Aruba New Central; the show commands run over the showCommands runner. show running-config and the VLAN endpoint are l3Interfaces dependencies, read to keep only CEF entries on an interface it emits |
| Routing table | show running-config | API | Aruba New Central; the show commands run over the showCommands runner. show running-config and the VLAN endpoint are l3Interfaces dependencies, read to keep only CEF entries on an interface it emits |
| Routing table | show vlans | CLIAPI | API: Aruba New Central; the show commands run over the showCommands runner. show running-config and the VLAN endpoint are l3Interfaces dependencies, read to keep only CEF entries on an interface it emits |
| SN | GET /network-monitoring/v1/devices | API | the tasker builds the ver from this call; the task sends no request of its own |
| SN | show system | CLI | |
| SNMP | show running-configuration | CLI | |
| Stacking | show stacking | CLI | |
| Stacking | show vsf detail | CLI | |
| Stacking | show vsf link | CLI | |
| Startup config | show config | CLI | |
| STP | POST /network-troubleshooting/v1/aos-s/<serial-number>/showCommands | API | Aruba New Central. show spanning-tree vlan <vlanId> for every VLAN in RPVST mode; the instance commands only in MSTP mode |
| STP | show spanning-tree | CLIAPI | API: Aruba New Central. show spanning-tree vlan <vlanId> for every VLAN in RPVST mode; the instance commands only in MSTP mode |
| STP | show spanning-tree config | CLIAPI | API: Aruba New Central. show spanning-tree vlan <vlanId> for every VLAN in RPVST mode; the instance commands only in MSTP mode |
| STP | show spanning-tree debug-counters instance <instance> ports all | CLIAPI | API: Aruba New Central. show spanning-tree vlan <vlanId> for every VLAN in RPVST mode; the instance commands only in MSTP mode |
| STP | show spanning-tree detail | CLI | |
| STP | show spanning-tree instance <instance> | CLIAPI | API: Aruba New Central. show spanning-tree vlan <vlanId> for every VLAN in RPVST mode; the instance commands only in MSTP mode |
| STP | show spanning-tree mst-config | CLIAPI | API: Aruba New Central. show spanning-tree vlan <vlanId> for every VLAN in RPVST mode; the instance commands only in MSTP mode |
| STP | show spanning-tree vlan <vlanId> | CLIAPI | API: Aruba New Central. show spanning-tree vlan <vlanId> for every VLAN in RPVST mode; the instance commands only in MSTP mode |
| STP | show vlans | CLIAPI | API: Aruba New Central. show spanning-tree vlan <vlanId> for every VLAN in RPVST mode; the instance commands only in MSTP mode |
| STP | show vlans ports all detail | CLIAPI | API: Aruba New Central. show spanning-tree vlan <vlanId> for every VLAN in RPVST mode; the instance commands only in MSTP mode |
| STP port security | show spanning-tree detail | CLI | |
| Syslog | show syslog config | CLI | |
| Transceivers | show interfaces transceiver | CLI | |
| Transceivers | show interfaces transceiver detail | CLI | |
| Vlan | GET /network-monitoring/v1/switches/<serial-number>/vlans | API | Aruba New Central; id, name and operational status |
| Vlan | show vlans | CLI |