# Task: Secured access ports — v8.2.0

**Version:** 8.2.0
**Category:** Security
**Description:** Ports secured with dot1x or MAB (MAC Authentication Bypass)
**New in this version:** No
**IPv6 Support:** No
**URL:** https://matrix.ipfabric.io/8.2.0/task/200150542

---

## Vendor Support Matrix

| Vendor / Family | Status | IPv6 | Notes | Transport |
|-----------------|--------|------|-------|-----------|
| aws | ✗ | — |  | — |
| alcatel@aos | ○ | — |  | — |
| avocent@acs | ○ | — |  | — |
| azure | ○ | — |  | — |
| brocade@fastiron | ✗ | — |  | — |
| cisco@ios | ✓ | — |  | CLI |
| cisco@ios-xe | ✓ | — |  | CLI |
| cisco@nx-os | ✗ | — |  | — |
| cisco@ios-xr | ○ | — |  | — |
| cisco@asa | ○ | — |  | — |
| cisco@wlc-air | ○ | — |  | — |
| cisco@sg | ✓ | — |  | CLI |
| cisco@ftd | ○ | — |  | — |
| cisco@aci | ✗ | — |  | — |
| cisco@meraki | ✗ | — |  | — |
| cisco@viptela | ✗ | — |  | — |
| cisco@apic | ○ | — |  | — |
| cisco@encs | ○ | — |  | — |
| dell@ftos | ✗ | — |  | — |
| dell@powerconnect | ✗ | — |  | — |
| dell@os10 | ✗ | — |  | — |
| dlink@dgs1210 | ✗ | — |  | — |
| dlink@dgs1250 | ✗ | — |  | — |
| dlink@des3000 | ✗ | — |  | — |
| fs@fsos | ✗ | — |  | — |
| gcp | ○ | — |  | — |
| hpe@comware | ✓ | — |  | CLI |
| hpe@aruba | ○ | — |  | — |
| hpe@arubasw | ✗ | — |  | — |
| hpe@arubacx | ✓ | — |  | CLI, API ✗ |
| hpe@3com | ✗ | — |  | — |
| hpe@aruba-iap | ○ | — |  | — |
| riverbed@steelhead | ○ | — |  | — |
| fortinet@fortigate | ○ | — |  | — |
| fortinet@fortiswitch | ✗ | — |  | — |
| forcepoint@ngfw | ○ | — |  | — |
| paloalto@pan-os | ○ | — |  | — |
| paloalto@prisma | ○ | — |  | — |
| juniper@junos | ✓ | — |  | CLI |
| juniper@mist | ○ | — |  | — |
| checkpoint@gaia | ○ | — |  | — |
| checkpoint@gaia-embedded | ○ | — |  | — |
| extreme@boss | ✗ | — |  | — |
| extreme@enterasys | ✗ | — |  | — |
| extreme@voss | ✗ | — |  | — |
| extreme@exos | ○ | — |  | — |
| arista@eos | ✗ | — |  | — |
| f5@big-ip | ✗ | — |  | — |
| f5@f5osa | ○ | — |  | — |
| f5@f5osc | ○ | — |  | — |
| huawei@vrp | ✓ | — |  | CLI |
| mikrotik@routeros | ✗ | — |  | — |
| quagga | ○ | — |  | — |
| frr | ○ | — |  | — |
| versa@vos | ✗ | — |  | — |
| silverpeak@unity | ○ | — |  | — |
| vmware@nsx-t | ○ | — |  | — |
| vmware@velocloud | ○ | — |  | — |
| ruckus@vsz | ✗ | — |  | — |
| opengear@og | ○ | — |  | — |
| opengear@og-om | ○ | — |  | — |
| stormshield@sn | ○ | — |  | — |
| zpe@nodegrid | ○ | — |  | — |
| nokia@timos | ✗ | — |  | — |
| citrix@adc | ○ | — |  | — |

---

## Commands

| Vendor / Family | Command | Notes | Transport |
|-----------------|---------|-------|-----------|
| hpe@comware | `display mac-authentication` |  | CLI |
| cisco@ios-xe | `show authentication sessions interface <intName> detail` |  | CLI |
| cisco@ios-xe | `show access-session` |  | CLI |
| cisco@ios-xe | `show access-session interface <intName> detail` |  | CLI |
| cisco@sg | `show interface status` |  | CLI |
| cisco@sg | `show dot1x` |  | CLI |
| cisco@sg | `show dot1x users` |  | CLI |
| hpe@comware | `display port-security` |  | CLI |
| hpe@comware | `display dot1x` |  | CLI |
| cisco@ios-xe | `show authentication sessions` |  | CLI |
| hpe@arubacx | `show port-access clients detail` |  | CLI |
| huawei@vrp | `display dot1x` | VRP S-series has no 'display port-security' command, so port-security ports are read from 'display current-configuration', which is already collected for tasks/deviceConfig/current. 'display access-user interface <intName> detail' is sent only for ports that report online users. | CLI |
| huawei@vrp | `display mac-authen` | VRP S-series has no 'display port-security' command, so port-security ports are read from 'display current-configuration', which is already collected for tasks/deviceConfig/current. 'display access-user interface <intName> detail' is sent only for ports that report online users. | CLI |
| huawei@vrp | `display current-configuration` | VRP S-series has no 'display port-security' command, so port-security ports are read from 'display current-configuration', which is already collected for tasks/deviceConfig/current. 'display access-user interface <intName> detail' is sent only for ports that report online users. | CLI |
| huawei@vrp | `display access-user interface <intName> detail` | VRP S-series has no 'display port-security' command, so port-security ports are read from 'display current-configuration', which is already collected for tasks/deviceConfig/current. 'display access-user interface <intName> detail' is sent only for ports that report online users. | CLI |
| juniper@junos | `show dot1x interface detail` |  | CLI |
| juniper@junos | `show interfaces terse` |  | CLI |
| cisco@ios | `show interface` |  | CLI |
| cisco@ios | `show access-session interface <intName> detail` | IOS versions starting 15.2 use 'show authentication sessions interface <intName> detail' | CLI |
| cisco@ios | `show access-session` | IOS versions starting 15.2 use 'show authentication sessions interface <intName> detail' | CLI |
| cisco@ios | `show authentication sessions interface <intName> detail` | IOS versions starting 15.2 use 'show authentication sessions interface <intName> detail' | CLI |
| cisco@ios | `show authentication sessions interface <intName>` | IOS versions starting 15.2 use 'show authentication sessions interface <intName> detail' | CLI |
| cisco@ios | `show authentication sessions` | IOS versions starting 15.2 use 'show authentication sessions interface <intName> detail' | CLI |
| cisco@ios-xe | `show run \| inc qos queue-stats-frame-count` | "show run | inc qos queue-stats-frame-count" for selected IOS-XE platforms (cat3k/cat9k) | CLI |
| cisco@ios-xe | `show version` |  | CLI |
| cisco@ios-xe | `show run` |  | CLI |
| cisco@ios-xe | `show mab all details` |  | CLI |
| cisco@ios-xe | `show dot1x all details` |  | CLI |
| cisco@ios-xe | `show interface` |  | CLI |
| cisco@ios | `show version` |  | CLI |
| cisco@ios | `show run` |  | CLI |
| cisco@ios | `show mab all details` |  | CLI |
| cisco@ios | `show dot1x all details` |  | CLI |

---

## Legend

- **✓** = Fully Integrated
- **✗** = Not Yet Integrated
- **○** = Not Available
- **CLI** = SSH or Telnet session, **API** = vendor or controller API; in the Transport column, **✗** after one = not yet integrated over it, **—** = not integrated over any transport. A family reached over both may use the API together with CLI or instead of it.

*Generated: 2026-11-22T13:53:25.558Z*
