Family: huawei vrp (v8.2.0) ================================================== Vendor: huawei Family: vrp Transport: CLI New: No Commands: -------------------------------------------------- Routing table: display ip routing-table vpn-instance verbose [CLI] SNMP: display snmp-agent community read [CLI] SNMP: display current-configuration [CLI] SN: display bridge mac-address [CLI] SN: display device manufacture-info [CLI] SN: display device esn [CLI] SN: display esn [CLI] Secured access ports: display access-user interface detail [VRP S-series has no 'display port-security' command, so port-security ports are read from 'display current-configuration', which is already collected for tasks/deviceConfig/current. 'display access-user interface detail' is sent only for ports that report online users.] [CLI] Secured access ports: display current-configuration [VRP S-series has no 'display port-security' command, so port-security ports are read from 'display current-configuration', which is already collected for tasks/deviceConfig/current. 'display access-user interface detail' is sent only for ports that report online users.] [CLI] Secured access ports: display mac-authen [VRP S-series has no 'display port-security' command, so port-security ports are read from 'display current-configuration', which is already collected for tasks/deviceConfig/current. 'display access-user interface detail' is sent only for ports that report online users.] [CLI] Secured access ports: display dot1x [VRP S-series has no 'display port-security' command, so port-security ports are read from 'display current-configuration', which is already collected for tasks/deviceConfig/current. 'display access-user interface detail' is sent only for ports that report online users.] [CLI] Routing table: display vrrp [CLI] Routing table: display ip vpn-instance interface [CLI] Routing table: display ip interface [CLI] Routing table: display mpls lsp verbose [CLI] Routing table: display ip routing-table vpn-instance protocol verbose [CLI] SNMP: display snmp-agent community write [CLI] Routing table: display ip routing-table vpn-instance statistics [CLI] Routing table: display ip vpn-instance [CLI] Routing table: display ip routing-table protocol verbose [CLI] Routing table: display ip routing-table verbose [CLI] Routing table: display ip routing-table statistics [CLI] Route summary: display ip routing-table vpn-instance statistics [CLI] Route summary: display ip routing-table statistics [CLI] Port mirroring: display observe-port [CLI] Port mirroring: display port-mirroring configuration [CLI] Port mirroring: display port-mirroring [CLI] Link aggregations: display interface [CLI] Link aggregations: display eth-trunk [CLI] PoE: display poe information [CLI] PoE: display poe power [CLI] STP: display vbst bpdu-statistics [CLI] VXLAN: display interfaces [CLI] VXLAN: display vxlan tunnel [CLI] VXLAN: display vxlan vni [CLI] VRF: display ip vpn-instance verbose [CLI] Vlan: display current-configuration [CLI] Vlan: display vlan [CLI] Transceivers: display optical-module extend information interface ['display interface transceiver verbose' is now used as backup cmd; display optical-module cmd used e.g. by NE routers] [CLI] Transceivers: display interface ['display interface transceiver verbose' is now used as backup cmd; display optical-module cmd used e.g. by NE routers] [CLI] Transceivers: display interface transceiver verbose ['display interface transceiver verbose' is now used as backup cmd; display optical-module cmd used e.g. by NE routers] [CLI] Transceivers: display transceiver verbose ['display interface transceiver verbose' is now used as backup cmd; display optical-module cmd used e.g. by NE routers] [CLI] Syslog: display info-center [CLI] STP port security: display current-configuration [CLI] STP port security: display stp global [CLI] STP port security: display stp [CLI] PoE: display poe power-state [CLI] STP: display stp vlan bpdu statistics [CLI] STP: display stp vlan information [CLI] STP: display stp region-configuration [CLI] STP: display stp vlan [CLI] STP: display stp [CLI] STP: display vlan [CLI] STP: display port vlan [CLI] STP: display port vlan active [CLI] STP: display interface [CLI] Storm control: display storm-control [CLI] Stacking: display device manufacture-info [CLI] Stacking: display stack port [CLI] Stacking: display stack peers [CLI] Stacking: display stack [CLI] Device info: display lldp local | include Chassis [ * display telnet server - used for VRP version 8 * display telnet server status - used for VRP version 5 ] [CLI] DHCPv4 Snooping: display clock [CLI] DHCPv4 Snooping: display dhcp snooping user-bind all [CLI] DHCPv4 Snooping: display dhcp snooping statistics [CLI] DHCPv4 Snooping: display dhcp snooping global [CLI] DHCPv4 Snooping: display dhcp snooping [CLI] DHCPv4 Relays: display vrrp [CLI] DHCPv4 Relays: display ip vpn-instance interface [CLI] DHCPv4 Relays: display ip vpn-instance [CLI] DHCPv4 Relays: display ip interface [CLI] DHCPv4 Relays: display current configuration [CLI] Startup config: display saved-configuration [CLI] Current config: display current-configuration [CLI] Configuration saved: display current-configuration [CLI] Configuration saved: display saved-configuration [CLI] DNS resolver: show current-configuration [CLI] Device info: display memory [ * display telnet server - used for VRP version 8 * display telnet server status - used for VRP version 5 ] [CLI] Device info: display telnet server status [ * display telnet server - used for VRP version 8 * display telnet server status - used for VRP version 5 ] [CLI] Device info: display telnet server [ * display telnet server - used for VRP version 8 * display telnet server status - used for VRP version 5 ] [CLI] Device info: display device manufacture-info [ * display telnet server - used for VRP version 8 * display telnet server status - used for VRP version 5 ] [CLI] Device info: display device [ * display telnet server - used for VRP version 8 * display telnet server status - used for VRP version 5 ] [CLI] Device info: display version [ * display telnet server - used for VRP version 8 * display telnet server status - used for VRP version 5 ] [CLI] BGP neighbors: display bgp peer verbose [CLI] BGP neighbors: display bgp peer [CLI] ARP: display arp all [CLI] ARP: display arp [CLI] AAA: display radius-server configuration [CLI] AAA: display current-configuration [CLI] Initial device discovery: screen-length 0 temporary [CLI] Initial device discovery: display version [CLI] L3 Interfaces: display ip interface [CLI] OSPF: display ospf peer [CLI] OSPF: display ospf interface all [CLI] NTP: display ntp sessions [CLI] Neighbors: display lldp neighbor [CLI] MPLS forwarding: display mpls lsp verbose [CLI] MPLS LDP: display mpls ldp interface verbose [CLI] MPLS LDP: display mpls ldp adjacency verbose [CLI] MPLS LDP: display mpls ldp peer verbose [CLI] MAC: display vxlan vni [CLI] MAC: display interface [CLI] MAC: display mac-address [CLI] L3 Interfaces: display vrrp [CLI] L3 Interfaces: display ip vpn-instance interface [CLI] L3 Interfaces: display ip vpn-instance [CLI] Disable pagination: screen-length 0 temporary [CLI] L2 Interfaces: display vlan [CLI] L2 Interfaces: display port vlan [CLI] L2 Interfaces: display port vlan active [CLI] L2 Interfaces: display interface [CLI] IS-IS: display isis peer verbose [vpn-instance ] [CLI] IS-IS: display isis interface verbose [vpn-instance ] [CLI] IS-IS: display ip vpn-instance [CLI] IP Flow: display sflow configuration [CLI] IP Flow: display sflow [CLI] IP Flow: display ip netstream all [CLI] FHRP: display vrrp protocol-information [CLI] FHRP: display vrrp verbose [CLI] FHRP: display vrrp [CLI] Error disabled interfaces: display interface [CLI] Task Support: -------------------------------------------------- Basic discovery: ✓ ARP [CLI] ✓ Device info [CLI] ✓ Disable pagination [CLI] ✓ FHRP (IPv6: ✗) [CLI] ✓ Initial device discovery [CLI] ✗ IPv6 Neighbor Discovery (IPv6: ✗) ✓ L2 Interfaces [CLI] ✓ L3 Interfaces (IPv6: ✗) [CLI] ✓ Link aggregations [CLI] ✓ MAC [CLI] ✓ Neighbors (IPv6: ✗) [CLI] ✓ Routing table (IPv6: ✗) [CLI] ○ Serial ports ✓ SN [CLI] ✓ STP [CLI] ○ Virtual Contexts ✓ Vlan [CLI] Configuration: ✓ Configuration saved [CLI] ✓ Current config [CLI] ✓ Startup config [CLI] Hardware: ○ Cluster ✓ End of Life data [CLI] ✗ Extenders ✓ PoE [CLI] ✗ Power supplies & fans ✓ Stacking [CLI] ✓ Transceivers [CLI] ○ VSS Hybrid discovery: ○ snCheck Management: ✓ DHCPv4 Relays (IPv6: ✗) [CLI] ✗ DHCPv4 Servers (IPv6: ✗) ✓ DNS resolver (IPv6: ✗) [CLI] ✓ IP Flow (IPv6: ✗) [CLI] ○ License ✓ NTP (IPv6: ✗) [CLI] ✓ Port mirroring [CLI] ○ PTP (IPv6: ○) ✓ SNMP (IPv6: ✗) [CLI] ✓ Syslog (IPv6: ✗) [CLI] ✗ Unidirectional Link Detection MPLS: ○ Circuit cross-connect ✓ MPLS forwarding [CLI] ✓ MPLS LDP [CLI] ✗ RSVP ✗ VPLS ✗ VPWS Multicast: ✗ IGMP ✗ IGMP Snooping ✗ MAC multicast address table ✗ MROUTE ✗ PIM Other: ○ Cloud network interfaces (IPv6: ○) ✗ PPPoE (IPv6: ✗) Policy: ✗ NAT44 QoS: ✗ QoS Routing: ✗ BGP Advertised Routes (IPv6: ✗) ○ Fabric Path ✗ Policy-based Routing (IPv6: ✗) ✓ Route summary (IPv6: ✗) [CLI] ○ Routing policies ✓ VRF [CLI] Routing protocols: ✓ BGP neighbors (IPv6: ✗) [CLI] ○ EIGRP (IPv6: ○) ✓ IS-IS (IPv6: ✗) [CLI] ○ Lisp (IPv6: ○) ✓ OSPF [CLI] ✗ OSPFv3 (IPv6: ✗) ✗ RIP SDN: ○ APIC (IPv6: ○) ○ Cisco ACI (IPv6: ○) ○ Virtual machines ✓ VXLAN [CLI] SDWAN: ✗ SD-WAN sites Security: ✓ AAA (IPv6: ✗) [CLI] ○ ACL (IPv6: ○) ✓ DHCPv4 Snooping (IPv6: ✗) [CLI] ✗ DMVPN (IPv6: ✗) ✓ Error disabled interfaces [CLI] ✗ IPsec (IPv6: ✗) ○ LSVPN (IPv6: ○) ○ Prefix lists (IPv6: ○) ✓ Secured access ports [CLI] ✓ Storm control [CLI] ✓ STP port security [CLI] ○ Virtual servers (IPv6: ○) ○ Zone firewall (IPv6: ○) Wireless: ✗ Wireless AP ✗ Wireless clients ✗ Wireless Controller with APs All Families from huawei: -------------------------------------------------- huawei@vrp <-- current Legend: ✓=Full, ✗=Not Yet, ○=N/A Transport: [CLI] = SSH or Telnet session, [API] = vendor or controller API, ✗ after one = not yet integrated over it