# Family: huawei vrp — v8.2.0

**Version:** 8.2.0
**Vendor:** huawei
**Family:** vrp
**New in this version:** No
**Transport:** CLI
**URL:** https://matrix.ipfabric.io/8.2.0/family/200121932

---

## Commands

| Task | Command | Notes | Transport |
|------|---------|-------|-----------|
| Routing table | `display ip routing-table vpn-instance <name> verbose` |  | CLI |
| SNMP | `display snmp-agent community read` |  | CLI |
| SNMP | `display current-configuration` |  | CLI |
| SN | `display bridge mac-address` |  | CLI |
| SN | `display device manufacture-info` |  | CLI |
| SN | `display device esn` |  | CLI |
| SN | `display esn` |  | CLI |
| Secured access ports | `display access-user interface <intName> detail` | VRP S-series has no 'display port-security' command, so port-security ports are read from 'display current-configuration', which is already collected for tasks/deviceConfig/current. 'display access-user interface <intName> detail' is sent only for ports that report online users. | CLI |
| Secured access ports | `display current-configuration` | VRP S-series has no 'display port-security' command, so port-security ports are read from 'display current-configuration', which is already collected for tasks/deviceConfig/current. 'display access-user interface <intName> detail' is sent only for ports that report online users. | CLI |
| Secured access ports | `display mac-authen` | VRP S-series has no 'display port-security' command, so port-security ports are read from 'display current-configuration', which is already collected for tasks/deviceConfig/current. 'display access-user interface <intName> detail' is sent only for ports that report online users. | CLI |
| Secured access ports | `display dot1x` | VRP S-series has no 'display port-security' command, so port-security ports are read from 'display current-configuration', which is already collected for tasks/deviceConfig/current. 'display access-user interface <intName> detail' is sent only for ports that report online users. | CLI |
| Routing table | `display vrrp` |  | CLI |
| Routing table | `display ip vpn-instance <name> interface` |  | CLI |
| Routing table | `display ip interface` |  | CLI |
| Routing table | `display mpls lsp verbose` |  | CLI |
| Routing table | `display ip routing-table vpn-instance <name> protocol <name> verbose` |  | CLI |
| SNMP | `display snmp-agent community write` |  | CLI |
| Routing table | `display ip routing-table vpn-instance <name> statistics` |  | CLI |
| Routing table | `display ip vpn-instance` |  | CLI |
| Routing table | `display ip routing-table protocol <name> verbose` |  | CLI |
| Routing table | `display ip routing-table verbose` |  | CLI |
| Routing table | `display ip routing-table statistics` |  | CLI |
| Route summary | `display ip routing-table vpn-instance <instanceName> statistics` |  | CLI |
| Route summary | `display ip routing-table statistics` |  | CLI |
| Port mirroring | `display observe-port` |  | CLI |
| Port mirroring | `display port-mirroring configuration` |  | CLI |
| Port mirroring | `display port-mirroring` |  | CLI |
| Link aggregations | `display interface` |  | CLI |
| Link aggregations | `display eth-trunk` |  | CLI |
| PoE | `display poe information` |  | CLI |
| PoE | `display poe power` |  | CLI |
| STP | `display vbst bpdu-statistics` |  | CLI |
| VXLAN | `display interfaces` |  | CLI |
| VXLAN | `display vxlan tunnel` |  | CLI |
| VXLAN | `display vxlan vni` |  | CLI |
| VRF | `display ip vpn-instance verbose` |  | CLI |
| Vlan | `display current-configuration` |  | CLI |
| Vlan | `display vlan` |  | CLI |
| Transceivers | `display optical-module extend information interface <intName>` | 'display interface transceiver verbose' is now used as backup cmd; display optical-module cmd used e.g. by NE routers | CLI |
| Transceivers | `display interface` | 'display interface transceiver verbose' is now used as backup cmd; display optical-module cmd used e.g. by NE routers | CLI |
| Transceivers | `display interface transceiver verbose` | 'display interface transceiver verbose' is now used as backup cmd; display optical-module cmd used e.g. by NE routers | CLI |
| Transceivers | `display transceiver verbose` | 'display interface transceiver verbose' is now used as backup cmd; display optical-module cmd used e.g. by NE routers | CLI |
| Syslog | `display info-center` |  | CLI |
| STP port security | `display current-configuration` |  | CLI |
| STP port security | `display stp global` |  | CLI |
| STP port security | `display stp` |  | CLI |
| PoE | `display poe power-state` |  | CLI |
| STP | `display stp vlan bpdu statistics` |  | CLI |
| STP | `display stp vlan information` |  | CLI |
| STP | `display stp region-configuration` |  | CLI |
| STP | `display stp vlan <vlanId>` |  | CLI |
| STP | `display stp` |  | CLI |
| STP | `display vlan` |  | CLI |
| STP | `display port vlan` |  | CLI |
| STP | `display port vlan active` |  | CLI |
| STP | `display interface` |  | CLI |
| Storm control | `display storm-control` |  | CLI |
| Stacking | `display device manufacture-info` |  | CLI |
| Stacking | `display stack port` |  | CLI |
| Stacking | `display stack peers` |  | CLI |
| Stacking | `display stack` |  | CLI |
| Device info | `display lldp local | include Chassis` | 
      * display telnet server - used for VRP version 8
      * display telnet server status - used for VRP version 5
       | CLI |
| DHCPv4 Snooping | `display clock` |  | CLI |
| DHCPv4 Snooping | `display dhcp snooping user-bind all` |  | CLI |
| DHCPv4 Snooping | `display dhcp snooping statistics` |  | CLI |
| DHCPv4 Snooping | `display dhcp snooping global` |  | CLI |
| DHCPv4 Snooping | `display dhcp snooping` |  | CLI |
| DHCPv4 Relays | `display vrrp` |  | CLI |
| DHCPv4 Relays | `display ip vpn-instance <name> interface` |  | CLI |
| DHCPv4 Relays | `display ip vpn-instance` |  | CLI |
| DHCPv4 Relays | `display ip interface` |  | CLI |
| DHCPv4 Relays | `display current configuration` |  | CLI |
| Startup config | `display saved-configuration` |  | CLI |
| Current config | `display current-configuration` |  | CLI |
| Configuration saved | `display current-configuration` |  | CLI |
| Configuration saved | `display saved-configuration` |  | CLI |
| DNS resolver | `show current-configuration` |  | CLI |
| Device info | `display memory` | 
      * display telnet server - used for VRP version 8
      * display telnet server status - used for VRP version 5
       | CLI |
| Device info | `display  telnet server status` | 
      * display telnet server - used for VRP version 8
      * display telnet server status - used for VRP version 5
       | CLI |
| Device info | `display telnet server` | 
      * display telnet server - used for VRP version 8
      * display telnet server status - used for VRP version 5
       | CLI |
| Device info | `display device manufacture-info` | 
      * display telnet server - used for VRP version 8
      * display telnet server status - used for VRP version 5
       | CLI |
| Device info | `display device` | 
      * display telnet server - used for VRP version 8
      * display telnet server status - used for VRP version 5
       | CLI |
| Device info | `display version` | 
      * display telnet server - used for VRP version 8
      * display telnet server status - used for VRP version 5
       | CLI |
| BGP neighbors | `display bgp <addressFamily> <vpnInstance> peer verbose` |  | CLI |
| BGP neighbors | `display bgp <addressFamiily> <vpnInstance> peer` |  | CLI |
| ARP | `display arp all` |  | CLI |
| ARP | `display arp` |  | CLI |
| AAA | `display radius-server configuration` |  | CLI |
| AAA | `display current-configuration` |  | CLI |
| Initial device discovery | `screen-length 0 temporary` |  | CLI |
| Initial device discovery | `display version` |  | CLI |
| L3 Interfaces | `display ip interface` |  | CLI |
| OSPF | `display ospf peer` |  | CLI |
| OSPF | `display ospf interface all` |  | CLI |
| NTP | `display ntp sessions` |  | CLI |
| Neighbors | `display lldp neighbor` |  | CLI |
| MPLS forwarding | `display mpls lsp verbose` |  | CLI |
| MPLS LDP | `display mpls ldp interface verbose` |  | CLI |
| MPLS LDP | `display mpls ldp adjacency verbose` |  | CLI |
| MPLS LDP | `display mpls ldp peer verbose` |  | CLI |
| MAC | `display vxlan vni` |  | CLI |
| MAC | `display interface` |  | CLI |
| MAC | `display mac-address` |  | CLI |
| L3 Interfaces | `display vrrp` |  | CLI |
| L3 Interfaces | `display ip vpn-instance <name> interface` |  | CLI |
| L3 Interfaces | `display ip vpn-instance` |  | CLI |
| Disable pagination | `screen-length 0 temporary` |  | CLI |
| L2 Interfaces | `display vlan` |  | CLI |
| L2 Interfaces | `display port vlan` |  | CLI |
| L2 Interfaces | `display port vlan active` |  | CLI |
| L2 Interfaces | `display interface` |  | CLI |
| IS-IS | `display isis peer verbose [vpn-instance <vpnInstance>]` |  | CLI |
| IS-IS | `display isis interface verbose [vpn-instance <vpnInstance>]` |  | CLI |
| IS-IS | `display ip vpn-instance` |  | CLI |
| IP Flow | `display sflow configuration` |  | CLI |
| IP Flow | `display sflow` |  | CLI |
| IP Flow | `display ip netstream all` |  | CLI |
| FHRP | `display vrrp protocol-information` |  | CLI |
| FHRP | `display vrrp verbose` |  | CLI |
| FHRP | `display vrrp` |  | CLI |
| Error disabled interfaces | `display interface` |  | CLI |

---

## Supported Tasks

| Category | Task | Status | IPv6 | Notes | Transport |
|----------|------|--------|------|-------|-----------|
| Basic discovery | ARP | ✓ | — |  | CLI |
| Basic discovery | Device info | ✓ | — | deviceManufactureInfo support to be finished | CLI |
| Basic discovery | Disable pagination | ✓ | — |  | CLI |
| Basic discovery | FHRP | ✓ | ✗ |  | CLI |
| Basic discovery | Initial device discovery | ✓ | — |  | CLI |
| Basic discovery | IPv6 Neighbor Discovery | ✗ | ✗ |  | — |
| Basic discovery | L2 Interfaces | ✓ | — |  | CLI |
| Basic discovery | L3 Interfaces | ✓ | ✗ |  | CLI |
| Basic discovery | Link aggregations | ✓ | — |  | CLI |
| Basic discovery | MAC | ✓ | — |  | CLI |
| Basic discovery | Neighbors | ✓ | ✗ |  | CLI |
| Basic discovery | Routing table | ✓ | ✗ |  | CLI |
| Basic discovery | Serial ports | ○ | — |  | — |
| Basic discovery | SN | ✓ | — |  | CLI |
| Basic discovery | STP | ✓ | — | missing support for LAGs and VBST | CLI |
| Basic discovery | Virtual Contexts | ○ | — |  | — |
| Basic discovery | Vlan | ✓ | — |  | CLI |
| Configuration | Configuration saved | ✓ | — |  | CLI |
| Configuration | Current config | ✓ | — |  | CLI |
| Configuration | Startup config | ✓ | — |  | CLI |
| Hardware | Cluster | ○ | — |  | — |
| Hardware | End of Life data | ✓ | — |  | CLI |
| Hardware | Extenders | ✗ | — |  | — |
| Hardware | PoE | ✓ | — |  | CLI |
| Hardware | Power supplies & fans | ✗ | — |  | — |
| Hardware | Stacking | ✓ | — | S-series iStack only, on S2700/S5700/S5720/S5735. CSS (modular chassis: S9700, S12700, S12700E) is not covered, and CloudEngine, AR and NE platforms are not verified - the task is not enabled for them. | CLI |
| Hardware | Transceivers | ✓ | — |  | CLI |
| Hardware | VSS | ○ | — |  | — |
| Hybrid discovery | snCheck | ○ | — |  | — |
| Management | DHCPv4 Relays | ✓ | ✗ |  | CLI |
| Management | DHCPv4 Servers | ✗ | ✗ |  | — |
| Management | DNS resolver | ✓ | ✗ |  | CLI |
| Management | IP Flow | ✓ | ✗ |  | CLI |
| Management | License | ○ | — |  | — |
| Management | NTP | ✓ | ✗ |  | CLI |
| Management | Port mirroring | ✓ | — |  | CLI |
| Management | PTP | ○ | ○ |  | — |
| Management | SNMP | ✓ | ✗ |  | CLI |
| Management | Syslog | ✓ | ✗ |  | CLI |
| Management | Unidirectional Link Detection | ✗ | — |  | — |
| MPLS | Circuit cross-connect | ○ | — |  | — |
| MPLS | MPLS forwarding | ✓ | — |  | CLI |
| MPLS | MPLS LDP | ✓ | — |  | CLI |
| MPLS | RSVP | ✗ | — |  | — |
| MPLS | VPLS | ✗ | — |  | — |
| MPLS | VPWS | ✗ | — |  | — |
| Multicast | IGMP | ✗ | — |  | — |
| Multicast | IGMP Snooping | ✗ | — |  | — |
| Multicast | MAC multicast address table | ✗ | — |  | — |
| Multicast | MROUTE | ✗ | — |  | — |
| Multicast | PIM | ✗ | — |  | — |
| Other | Cloud network interfaces | ○ | ○ |  | — |
| Other | PPPoE | ✗ | ✗ |  | — |
| Policy | NAT44 | ✗ | — |  | — |
| QoS | QoS | ✗ | — |  | — |
| Routing | BGP Advertised Routes | ✗ | ✗ |  | — |
| Routing | Fabric Path | ○ | — |  | — |
| Routing | Policy-based Routing | ✗ | ✗ |  | — |
| Routing | Route summary | ✓ | ✗ |  | CLI |
| Routing | Routing policies | ○ | — |  | — |
| Routing | VRF | ✓ | — |  | CLI |
| Routing protocols | BGP neighbors | ✓ | ✗ |  | CLI |
| Routing protocols | EIGRP | ○ | ○ |  | — |
| Routing protocols | IS-IS | ✓ | ✗ |  | CLI |
| Routing protocols | Lisp | ○ | ○ |  | — |
| Routing protocols | OSPF | ✓ | — |  | CLI |
| Routing protocols | OSPFv3 | ✗ | ✗ |  | — |
| Routing protocols | RIP | ✗ | — |  | — |
| SDN | APIC | ○ | ○ |  | — |
| SDN | Cisco ACI | ○ | ○ |  | — |
| SDN | Virtual machines | ○ | — |  | — |
| SDN | VXLAN | ✓ | — |  | CLI |
| SDWAN | SD-WAN sites | ✗ | — |  | — |
| Security | AAA | ✓ | ✗ |  | CLI |
| Security | ACL | ○ | ○ |  | — |
| Security | DHCPv4 Snooping | ✓ | ✗ |  | CLI |
| Security | DMVPN | ✗ | ✗ |  | — |
| Security | Error disabled interfaces | ✓ | — |  | CLI |
| Security | IPsec | ✗ | ✗ |  | — |
| Security | LSVPN | ○ | ○ |  | — |
| Security | Prefix lists | ○ | ○ |  | — |
| Security | Secured access ports | ✓ | — |  | CLI |
| Security | Storm control | ✓ | — | traffic suppression (broadcast/multicast/unicast-suppression, display flow-suppression interface) is a separate mechanism and is not covered | CLI |
| Security | STP port security | ✓ | — |  | CLI |
| Security | Virtual servers | ○ | ○ |  | — |
| Security | Zone firewall | ○ | ○ |  | — |
| Wireless | Wireless AP | ✗ | — |  | — |
| Wireless | Wireless clients | ✗ | — |  | — |
| Wireless | Wireless Controller with APs | ✗ | — |  | — |

---

## All Families from huawei

- **huawei@vrp** *(current)*

---

## Legend

- **✓** = Fully Integrated
- **✗** = Not Yet Integrated
- **○** = Not Available
- **🆕** = New in this version
- **CLI** = SSH or Telnet session, **API** = vendor or controller API; in the Transport column, **✗** after one = not yet integrated over it, **—** = not integrated over any transport. A family reached over both may use the API together with CLI or instead of it.

*Generated: 2026-11-22T13:54:35.829Z*
