# Family: juniper junos — v8.2.0

**Version:** 8.2.0
**Vendor:** juniper
**Family:** junos
**New in this version:** No
**Transport:** CLI
**URL:** https://matrix.ipfabric.io/8.2.0/family/200121881

---

## Commands

| Task | Command | Notes | Transport |
|------|---------|-------|-----------|
| Link aggregations | `show interfaces statistics detail` |  | CLI |
| NTP | `show ntp associations no-resolve` |  | CLI |
| OSPF | `show ospf interface detail instance <instanceName>` |  | CLI |
| OSPF | `show ospf neighbor detail instance all` |  | CLI |
| OSPF | `show ospf overview` |  | CLI |
| OSPFv3 | `show ospf3 interface detail instance <instanceName>` |  | CLI |
| OSPFv3 | `show ospf3 neighbor detail instance all` |  | CLI |
| OSPFv3 | `show ospf3 overview instance <instanceName>` |  | CLI |
| OSPFv3 | `show route instance detail` |  | CLI |
| OSPFv3 | `show configuration | display set` |  | CLI |
| PoE | `show poe interface` |  | CLI |
| PoE | `show poe controller` |  | CLI |
| Neighbors | `show lldp neighbors interface <intName>` |  | CLI |
| Link aggregations | `show lacp interfaces` |  | CLI |
| Port mirroring | `show analyzer` |  | CLI |
| Port mirroring | `show forwarding-options analyzer` |  | CLI |
| RIP | `show rip interfaces instance all` |  | CLI |
| RIP | `show rip statistics instance all` |  | CLI |
| Route summary | `show route summary` |  | CLI |
| Route summary | `show route instance detail` |  | CLI |
| Route summary | `show bgp neighbor <instanceName>` |  | CLI |
| Route summary | `show route table <instanceName>.inet.0 protocol isis active-path detail | match level` |  | CLI |
| Route summary | `show ospf neighbor detail instance all` |  | CLI |
| Route summary | `show ospf route network detail instance <instanceName>` |  | CLI |
| MPLS LDP | `show interfaces statistics detail` |  | CLI |
| MROUTE | `show multicast rpf <prefix>` |  | CLI |
| MROUTE | `show pim rps` |  | CLI |
| MROUTE | `show route instance detail` |  | CLI |
| PIM | `show pim interface` |  | CLI |
| PIM | `show pim neighbors` |  | CLI |
| PIM | `show pim neighbors detail` |  | CLI |
| PIM | `show interfaces statistics detail` |  | CLI |
| PIM | `show route instance detail` |  | CLI |
| PIM | `show vrrp detail` |  | CLI |
| PIM | `show pim rps` |  | CLI |
| PIM | `show pim bootstrap` |  | CLI |
| Route summary | `show configuration | display set` |  | CLI |
| MPLS LDP | `show ldp interface extensive instance <vrf>` |  | CLI |
| MPLS LDP | `show ldp neighbor extensive instance <vrf>` |  | CLI |
| MPLS LDP | `show configuration | display set` |  | CLI |
| MPLS forwarding | `show route active-path` |  | CLI |
| MPLS forwarding | `show route active-path table mpls.0` |  | CLI |
| MPLS forwarding | `show route active-path table mpls.0 protocol <protocol>` |  | CLI |
| MPLS forwarding | `show rsvp session up detail` |  | CLI |
| NAT44 | `show configuration security | display inheritance` |  | CLI |
| NAT44 | `show configuration applications | display inheritance` |  | CLI |
| NAT44 | `show configuration groups junos-defaults applications | display set` |  | CLI |
| Neighbors | `show lldp neighbors` |  | CLI |
| Vlan | `show vlans detail` |  | CLI |
| STP | `show spanning-tree mstp configuration` |  | CLI |
| STP | `show spanning-tree statistics interface` |  | CLI |
| STP | `show configuration` |  | CLI |
| STP port security | `show spanning-tree interface detail` | only EX and QFX switches use even show ethernet-switching interfaces | CLI |
| STP port security | `show ethernet-switching interfaces` | only EX and QFX switches use even show ethernet-switching interfaces | CLI |
| STP port security | `show configuration | display set | except "^deactivate"` | only EX and QFX switches use even show ethernet-switching interfaces | CLI |
| Syslog | `show configuration | display set | except "^deactivate"` |  | CLI |
| Transceivers | `show chassis hardware` |  | CLI |
| Transceivers | `show interfaces diagnostics optics` |  | CLI |
| Transceivers | `show interfaces terse` |  | CLI |
| Transceivers | `show virtual-chassis vc-port all-members` |  | CLI |
| STP | `show spanning-tree interface detail` |  | CLI |
| Vlan | `show configuration | display set ` |  | CLI |
| VRF | `show route instance detail` |  | CLI |
| VRF | `show configuration | display set | except "^deactivate"` |  | CLI |
| VXLAN | `show ethernet-switching vxlan-tunnel-end-point source` |  | CLI |
| VXLAN | `show ethernet-switching vxlan-tunnel-end-point remote` |  | CLI |
| VXLAN | `show interfaces statistics detail` |  | CLI |
| VXLAN | `show vlans detail` |  | CLI |
| Zone firewall | `show configuration security | display inheritance` |  | CLI |
| Zone firewall | `show configuration applications | display inheritance` |  | CLI |
| Zone firewall | `show configuration groups junos-defaults applications | display set` |  | CLI |
| Zone firewall | `show interfaces statistics detail` |  | CLI |
| RSVP | `show rsvp neighbor detail` |  | CLI |
| Routing table | `show route summary` |  | CLI |
| Routing table | `show route active-path` |  | CLI |
| Routing table | `show route active-path table inet.0` |  | CLI |
| Routing table | `show route active-path table inet.0 protocol <protocol>` |  | CLI |
| Routing table | `show route active-route protocol bgp community <community> table <table>` |  | CLI |
| Routing table | `show rsvp session up detail` |  | CLI |
| RSVP | `show rsvp interface extensive instance <name>` |  | CLI |
| RSVP | `show rsvp neighbor detail instance <name>` |  | CLI |
| RSVP | `show interfaces statistics detail` |  | CLI |
| RSVP | `show route instance detail` |  | CLI |
| RSVP | `show rsvp interface extensive` |  | CLI |
| MROUTE | `show multicast route extensive` |  | CLI |
| RSVP | `show configuration | display set` |  | CLI |
| Secured access ports | `show dot1x interface detail` |  | CLI |
| Secured access ports | `show interfaces terse` |  | CLI |
| SN | `show chassis hardware` |  | CLI |
| SNMP | `show configuration | display set | except "^deactivate"` |  | CLI |
| SNMP | `show interfaces statistics detail` |  | CLI |
| Stacking | `show virtual-chassis` |  | CLI |
| Stacking | `show virtual-chassis device-topology` |  | CLI |
| Stacking | `show virtual-chassis vc-port all-member` |  | CLI |
| STP | `show vlans detail` |  | CLI |
| STP | `show spanning-tree bridge detail` |  | CLI |
| DHCPv4 Snooping | `show dhcp snooping binding` | commands "show dhcp snooping binding" and "show dhcp-security binding" provide equal output, always only one of them is supported | CLI |
| DHCPv4 Servers | `show dhcp server binding detail` |  | CLI |
| DHCPv4 Servers | `show dhcp server binding routing-instance <routing-instance> detail` |  | CLI |
| DHCPv4 Servers | `show interfaces statistics detail` |  | CLI |
| DHCPv4 Servers | `show route instance detail` |  | CLI |
| DHCPv4 Servers | `show vrrp detail` |  | CLI |
| DHCPv4 Servers | `show vlans detail` |  | CLI |
| DHCPv4 Servers | `show system services dhcp pool <poolName> detail` |  | CLI |
| DHCPv4 Servers | `show system services dhcp pool` |  | CLI |
| DHCPv4 Servers | `show system services dhcp binding` |  | CLI |
| DHCPv4 Servers | `show system services dhcp client` |  | CLI |
| DHCPv4 Servers | `show system uptime` |  | CLI |
| DHCPv4 Servers | `show configuration | display set` |  | CLI |
| DHCPv4 Snooping | `show dhcp-security binding` | commands "show dhcp snooping binding" and "show dhcp-security binding" provide equal output, always only one of them is supported | CLI |
| DHCPv4 Snooping | `show vlans detail` | commands "show dhcp snooping binding" and "show dhcp-security binding" provide equal output, always only one of them is supported | CLI |
| DHCPv4 Snooping | `show configuration | display set | except "^deactivate"` | commands "show dhcp snooping binding" and "show dhcp-security binding" provide equal output, always only one of them is supported | CLI |
| DNS resolver | `show configuration | display set` |  | CLI |
| Power supplies & fans | `show chassis hardware` |  | CLI |
| Power supplies & fans | `show version` |  | CLI |
| Power supplies & fans | `show chassis environment` |  | CLI |
| Error disabled interfaces | `show ethernet-switching interface` | EX and QFX switches use even show ethernet-switching interface, others use just show spanning-tree interface detail | CLI |
| Error disabled interfaces | `show ethernet-switching interfaces` | EX and QFX switches use even show ethernet-switching interface, others use just show spanning-tree interface detail | CLI |
| Error disabled interfaces | `show spanning-tree interface detail` | EX and QFX switches use even show ethernet-switching interface, others use just show spanning-tree interface detail | CLI |
| Error disabled interfaces | `show interfaces statistics detail` | EX and QFX switches use even show ethernet-switching interface, others use just show spanning-tree interface detail | CLI |
| Cluster | `show chassis cluster status` |  | CLI |
| Initial device discovery | `show version` |  | CLI |
| Initial device discovery | `set cli screen-width 0` |  | CLI |
| AAA | `show configuration | display set | except "^deactivate"` |  | CLI |
| ACL | `show configuration firewall | display inheritance` |  | CLI |
| ACL | `show configuration policy-options | display inheritance` |  | CLI |
| ACL | `show configuration interfaces | display inheritance` |  | CLI |
| ARP | `show arp no-resolve` |  | CLI |
| BGP neighbors | `show route instance detail` |  | CLI |
| BGP neighbors | `show bgp neighbor instance <instanceName>` |  | CLI |
| BGP neighbors | `show bgp summary <instanceName>` |  | CLI |
| BGP neighbors | `show configuration | display set` |  | CLI |
| FHRP | `show vrrp detail` |  | CLI |
| Cluster | `show chassis cluster interfaces` |  | CLI |
| Device info | `show version` |  | CLI |
| Device info | `show chassis hardware` |  | CLI |
| Device info | `show system uptime` |  | CLI |
| Device info | `show system connections` |  | CLI |
| Device info | `show chassis routing-engine` |  | CLI |
| Device info | `show configuration | display set` |  | CLI |
| Current config | `show configuration` |  | CLI |
| DHCPv4 Relays | `show configuration | display set` |  | CLI |
| DHCPv4 Relays | `show dhcp relay statistics` |  | CLI |
| DHCPv4 Relays | `show dhcp relay statistics routing-instance <routing-instance>` |  | CLI |
| L3 Interfaces | `show security ipsec security-associations detail` |  | CLI |
| Circuit cross-connect | `show connections extensive` |  | CLI |
| Circuit cross-connect | `show mpls ldp` |  | CLI |
| VPLS | `show vpls connections extensive` |  | CLI |
| VPLS | `show route instance detail` |  | CLI |
| VPWS | `show l2circuit connections extensive` |  | CLI |
| VPWS | `show l2vpn connections extensive` |  | CLI |
| VPWS | `show route instance detail` |  | CLI |
| L3 Interfaces | `show interfaces statistics detail` |  | CLI |
| L3 Interfaces | `show route instance detail` |  | CLI |
| L3 Interfaces | `show vrrp detail` |  | CLI |
| L3 Interfaces | `show vlans detail` |  | CLI |
| L2 Interfaces | `show configuration | display set` |  | CLI |
| MAC | `show ethernet-switching table` |  | CLI |
| MAC | `show vlans detail` |  | CLI |
| MAC | `show ethernet-switching vxlan-tunnel-end-point source` |  | CLI |
| MAC | `show ethernet-switching vxlan-tunnel-end-point esi` |  | CLI |
| IGMP | `show igmp interface` |  | CLI |
| IGMP | `show igmp group` |  | CLI |
| IGMP | `show interfaces statistics detail` |  | CLI |
| IGMP | `show route instance detail` |  | CLI |
| IGMP | `show vrrp detail` |  | CLI |
| IGMP Snooping | `show igmp snooping membership detail` |  | CLI |
| IGMP Snooping | `show vlans detail` |  | CLI |
| IS-IS | `show isis interface extensive instance <instanceName>` |  | CLI |
| IP Flow | `show configuration firewall | display omit` |  | CLI |
| IP Flow | `show configuration forwarding-options sampling` |  | CLI |
| IP Flow | `show configuration interfaces | match sampling | except filter | display set` |  | CLI |
| IP Flow | `show configuration policy-options | display set` |  | CLI |
| IP Flow | `show interfaces statistics detail` |  | CLI |
| IP Flow | `show sflow collector` |  | CLI |
| IP Flow | `show sflow interface` |  | CLI |
| IP Flow | `show sflow` |  | CLI |
| IPsec | `show security ike security-associations detail` |  | CLI |
| IPsec | `show security ipsec security-associations detail` |  | CLI |
| IPsec | `show configuration | display set | except "^deactivate"` |  | CLI |
| Disable pagination | `set cli screen-length 0` |  | CLI |
| IS-IS | `show isis overview instance <instanceName>` |  | CLI |
| IS-IS | `show isis adjacency extensive instance <instanceName>` |  | CLI |
| IS-IS | `show interfaces statistics detail` |  | CLI |
| IS-IS | `show version` |  | CLI |
| IS-IS | `show chassis cluster status` |  | CLI |
| IS-IS | `show configuration | display set` |  | CLI |
| L2 Interfaces | `show interfaces statistics detail` |  | CLI |
| L2 Interfaces | `show interfaces terse` |  | CLI |
| L2 Interfaces | `show vlans detail` |  | CLI |
| L2 Interfaces | `show analyzer` |  | CLI |
| L2 Interfaces | `show dot1x interface detail` |  | CLI |

---

## Supported Tasks

| Category | Task | Status | IPv6 | Notes | Transport |
|----------|------|--------|------|-------|-----------|
| Basic discovery | ARP | ✓ | — |  | CLI |
| Basic discovery | Device info | ✓ | — |  | CLI |
| Basic discovery | Disable pagination | ✓ | — |  | CLI |
| Basic discovery | FHRP | ✓ | ✗ |  | CLI |
| Basic discovery | Initial device discovery | ✓ | — |  | CLI |
| Basic discovery | IPv6 Neighbor Discovery | ✗ | ✗ |  | — |
| Basic discovery | L2 Interfaces | ✓ | — |  | CLI |
| Basic discovery | L3 Interfaces | ✓ | ✓ |  | CLI |
| Basic discovery | Link aggregations | ✓ | — |  | CLI |
| Basic discovery | MAC | ✓ | — |  | CLI |
| Basic discovery | Neighbors | ✓ | ✗ |  | CLI |
| Basic discovery | Routing table | ✓ | ✓ |  | CLI |
| Basic discovery | Serial ports | ○ | — |  | — |
| Basic discovery | SN | ✓ | — |  | CLI |
| Basic discovery | STP | ✓ | — |  | CLI |
| Basic discovery | Virtual Contexts | ○ | — |  | — |
| Basic discovery | Vlan | ✓ | — |  | CLI |
| Configuration | Configuration saved | ○ | — | Changes must be commited | — |
| Configuration | Current config | ✓ | — |  | CLI |
| Configuration | Startup config | ○ | — |  | — |
| Hardware | Cluster | ✓ | — |  | CLI |
| Hardware | End of Life data | ✓ | — |  | CLI |
| Hardware | Extenders | ○ | — |  | — |
| Hardware | PoE | ✓ | — |  | CLI |
| Hardware | Power supplies & fans | ✓ | — |  | CLI |
| Hardware | Stacking | ✓ | — |  | CLI |
| Hardware | Transceivers | ✓ | — |  | CLI |
| Hardware | VSS | ○ | — |  | — |
| Hybrid discovery | snCheck | ○ | — |  | — |
| Management | DHCPv4 Relays | ✓ | ✗ |  | CLI |
| Management | DHCPv4 Servers | ✓ | ✗ |  | CLI |
| Management | DNS resolver | ✓ | ✗ |  | CLI |
| Management | IP Flow | ✓ | ✗ |  | CLI |
| Management | License | ✗ | — |  | — |
| Management | NTP | ✓ | ✗ |  | CLI |
| Management | Port mirroring | ✓ | — | ex switches | CLI |
| Management | PTP | ✗ | ✗ |  | — |
| Management | SNMP | ✓ | ✗ |  | CLI |
| Management | Syslog | ✓ | ✗ |  | CLI |
| Management | Unidirectional Link Detection | ✗ | — | ex switches | — |
| MPLS | Circuit cross-connect | ✓ | — |  | CLI |
| MPLS | MPLS forwarding | ✓ | — |  | CLI |
| MPLS | MPLS LDP | ✓ | — |  | CLI |
| MPLS | RSVP | ✓ | — |  | CLI |
| MPLS | VPLS | ✓ | — |  | CLI |
| MPLS | VPWS | ✓ | — |  | CLI |
| Multicast | IGMP | ✓ | — |  | CLI |
| Multicast | IGMP Snooping | ✓ | — |  | CLI |
| Multicast | MAC multicast address table | ✗ | — |  | — |
| Multicast | MROUTE | ✓ | — |  | CLI |
| Multicast | PIM | ✓ | — |  | CLI |
| Other | Cloud network interfaces | ○ | ○ |  | — |
| Other | PPPoE | ✗ | ✗ |  | — |
| Policy | NAT44 | ✓ | — |  | CLI |
| QoS | QoS | ✗ | — |  | — |
| Routing | BGP Advertised Routes | ✗ | ✗ |  | — |
| Routing | Fabric Path | ○ | — |  | — |
| Routing | Policy-based Routing | ✗ | ✗ |  | — |
| Routing | Route summary | ✓ | ✗ |  | CLI |
| Routing | Routing policies | ○ | — |  | — |
| Routing | VRF | ✓ | — |  | CLI |
| Routing protocols | BGP neighbors | ✓ | ✗ |  | CLI |
| Routing protocols | EIGRP | ○ | ○ |  | — |
| Routing protocols | IS-IS | ✓ | ✓ |  | CLI |
| Routing protocols | Lisp | ○ | ○ |  | — |
| Routing protocols | OSPF | ✓ | — |  | CLI |
| Routing protocols | OSPFv3 | ✓ | ✓ |  | CLI |
| Routing protocols | RIP | ✓ | — |  | CLI |
| SDN | APIC | ○ | ○ |  | — |
| SDN | Cisco ACI | ○ | ○ |  | — |
| SDN | Virtual machines | ○ | — |  | — |
| SDN | VXLAN | ✓ | — |  | CLI |
| SDWAN | SD-WAN sites | ✗ | — |  | — |
| Security | AAA | ✓ | ✗ |  | CLI |
| Security | ACL | ✓ | ✗ |  | CLI |
| Security | DHCPv4 Snooping | ✓ | ✗ |  | CLI |
| Security | DMVPN | ○ | ○ |  | — |
| Security | Error disabled interfaces | ✓ | — |  | CLI |
| Security | IPsec | ✓ | ✗ |  | CLI |
| Security | LSVPN | ○ | ○ |  | — |
| Security | Prefix lists | ✗ | ✗ |  | — |
| Security | Secured access ports | ✓ | — |  | CLI |
| Security | Storm control | ✗ | — |  | — |
| Security | STP port security | ✓ | — | Only Portfast and BPDU filter available. | CLI |
| Security | Virtual servers | ○ | ○ |  | — |
| Security | Zone firewall | ✓ | ✓ |  | CLI |
| Wireless | Wireless AP | ○ | — |  | — |
| Wireless | Wireless clients | ○ | — |  | — |
| Wireless | Wireless Controller with APs | ○ | — |  | — |

---

## All Families from juniper

- **juniper@junos** *(current)*
- [juniper@mist](https://matrix.ipfabric.io/8.2.0/family/200121884)

---

## Legend

- **✓** = Fully Integrated
- **✗** = Not Yet Integrated
- **○** = Not Available
- **🆕** = New in this version
- **CLI** = SSH or Telnet session, **API** = vendor or controller API; in the Transport column, **✗** after one = not yet integrated over it, **—** = not integrated over any transport. A family reached over both may use the API together with CLI or instead of it.

*Generated: 2026-11-22T13:54:40.472Z*
