# Family: fortinet fortiswitch — v8.2.0

**Version:** 8.2.0
**Vendor:** fortinet
**Family:** fortiswitch
**New in this version:** No
**Transport:** CLI
**URL:** https://matrix.ipfabric.io/8.2.0/family/200121860

---

## Commands

| Task | Command | Notes | Transport |
|------|---------|-------|-----------|
| SN | `get system status` |  | CLI |
| STP | `diagnose netlink device list` |  | CLI |
| STP | `diagnose switch trunk list` |  | CLI |
| STP | `diagnose switch physical-ports list` |  | CLI |
| STP | `show switch vlan` |  | CLI |
| STP | `diagnose stp instance list` |  | CLI |
| SNMP | `show full-configuration system snmp user` |  | CLI |
| SNMP | `get system snmp sysinfo` |  | CLI |
| SNMP | `show full-configuration system snmp community` |  | CLI |
| STP | `get system interface` |  | CLI |
| Routing table | `get router info6 routing-table` |  | CLI |
| Routing table | `get router info routing-table all` |  | CLI |
| Route summary | `show full-configuration router static6` |  | CLI |
| Route summary | `get router info routing-table all` |  | CLI |
| Route summary | `get router info6 routing-table` |  | CLI |
| Route summary | `show full-configuration router static` |  | CLI |
| Link aggregations | `diagnose switch mclag icl` |  | CLI |
| Syslog | `get log syslogd3 filter` |  | CLI |
| Vlan | `show switch vlan` |  | CLI |
| Transceivers | `diagnose switch modules state-machine` |  | CLI |
| Transceivers | `get switch modules limits` |  | CLI |
| Transceivers | `get switch modules status` |  | CLI |
| Transceivers | `get switch modules detail` |  | CLI |
| Syslog | `get log memory filter` |  | CLI |
| Syslog | `get log memory setting` |  | CLI |
| Syslog | `get log syslogd4 filter` |  | CLI |
| Link aggregations | `diagnose switch mclag list` |  | CLI |
| Syslog | `get log syslogd2 filter` |  | CLI |
| Syslog | `get log syslogd filter` |  | CLI |
| Syslog | `get log syslogd4 setting` |  | CLI |
| Syslog | `get log syslogd3 setting` |  | CLI |
| Syslog | `get log syslogd2 setting` |  | CLI |
| Syslog | `get log syslogd setting` |  | CLI |
| STP | `show switch interface` |  | CLI |
| Device info | `diagnose switch physical-ports list` |  | CLI |
| L2 Interfaces | `diagnose switch physical-ports list` |  | CLI |
| FHRP | `get router info6 vrrp` |  | CLI |
| FHRP | `get router info vrrp` |  | CLI |
| Power supplies & fans | `get system status` |  | CLI |
| Power supplies & fans | `diagnose sys psu status` |  | CLI |
| Power supplies & fans | `diagnose sys fan status` |  | CLI |
| DNS resolver | `show system interface` |  | CLI |
| DNS resolver | `get system dns` |  | CLI |
| L2 Interfaces | `diagnose switch trunk list` |  | CLI |
| Device info | `show system interface` |  | CLI |
| Device info | `get system status` |  | CLI |
| Device info | `get system performance status` |  | CLI |
| Device info | `get hardware memory` |  | CLI |
| ARP | `get system arp` |  | CLI |
| AAA | `show` |  | CLI |
| AAA | `get system password-policy` |  | CLI |
| Initial device discovery | `get system status` |  | CLI |
| L2 Interfaces | `diagnose netlink device list` |  | CLI |
| L2 Interfaces | `get system interface` |  | CLI |
| L2 Interfaces | `show switch interface` |  | CLI |
| L3 Interfaces | `show system interface` |  | CLI |
| L3 Interfaces | `get system interface` |  | CLI |
| L3 Interfaces | `diagnose netlink interface list` |  | CLI |
| L3 Interfaces | `diagnose ipv6 address list` |  | CLI |
| L3 Interfaces | `get router info vrrp` |  | CLI |
| L3 Interfaces | `get router info6 vrrp` |  | CLI |
| MAC | `diagnose switch mac-address list` |  | CLI |
| IPv6 Neighbor Discovery | `diagnose ipv6 neighbor-cache list` |  | CLI |
| Neighbors | `get switch lldp neighbors-detail` |  | CLI |
| NTP | `diagnose sys ntp status` |  | CLI |
| NTP | `show system ntp` |  | CLI |
| Link aggregations | `diagnose switch trunk list` |  | CLI |

---

## Supported Tasks

| Category | Task | Status | IPv6 | Notes | Transport |
|----------|------|--------|------|-------|-----------|
| Basic discovery | ARP | ✓ | — |  | CLI |
| Basic discovery | Device info | ✓ | — |  | CLI |
| Basic discovery | Disable pagination | ○ | — |  | — |
| Basic discovery | FHRP | ✓ | ✓ |  | CLI |
| Basic discovery | Initial device discovery | ✓ | — |  | CLI |
| Basic discovery | IPv6 Neighbor Discovery | ✓ | ✓ |  | CLI |
| Basic discovery | L2 Interfaces | ✓ | — |  | CLI |
| Basic discovery | L3 Interfaces | ✓ | ✓ |  | CLI |
| Basic discovery | Link aggregations | ✓ | — |  | CLI |
| Basic discovery | MAC | ✓ | — |  | CLI |
| Basic discovery | Neighbors | ✓ | ✓ |  | CLI |
| Basic discovery | Routing table | ✓ | ✓ |  | CLI |
| Basic discovery | Serial ports | ○ | — |  | — |
| Basic discovery | SN | ✓ | — |  | CLI |
| Basic discovery | STP | ✓ | — |  | CLI |
| Basic discovery | Virtual Contexts | ○ | — |  | — |
| Basic discovery | Vlan | ✓ | — |  | CLI |
| Configuration | Configuration saved | ✗ | — |  | — |
| Configuration | Current config | ✗ | — |  | — |
| Configuration | Startup config | ○ | — |  | — |
| Hardware | Cluster | ✗ | — |  | — |
| Hardware | End of Life data | ✗ | — |  | — |
| Hardware | Extenders | ○ | — |  | — |
| Hardware | PoE | ✗ | — |  | — |
| Hardware | Power supplies & fans | ✓ | — |  | CLI |
| Hardware | Stacking | ✗ | — |  | — |
| Hardware | Transceivers | ✓ | — |  | CLI |
| Hardware | VSS | ○ | — |  | — |
| Hybrid discovery | snCheck | ○ | — |  | — |
| Management | DHCPv4 Relays | ✗ | ✗ |  | — |
| Management | DHCPv4 Servers | ✗ | ✗ |  | — |
| Management | DNS resolver | ✓ | ✓ |  | CLI |
| Management | IP Flow | ✗ | ✗ |  | — |
| Management | License | ✗ | — |  | — |
| Management | NTP | ✓ | ✗ |  | CLI |
| Management | Port mirroring | ✗ | — |  | — |
| Management | PTP | ✗ | ✗ |  | — |
| Management | SNMP | ✓ | ✗ |  | CLI |
| Management | Syslog | ✓ | ✗ |  | CLI |
| Management | Unidirectional Link Detection | ○ | — |  | — |
| MPLS | Circuit cross-connect | ○ | — |  | — |
| MPLS | MPLS forwarding | ○ | — |  | — |
| MPLS | MPLS LDP | ○ | — |  | — |
| MPLS | RSVP | ○ | — |  | — |
| MPLS | VPLS | ○ | — |  | — |
| MPLS | VPWS | ○ | — |  | — |
| Multicast | IGMP | ✗ | — |  | — |
| Multicast | IGMP Snooping | ✗ | — |  | — |
| Multicast | MAC multicast address table | ✗ | — |  | — |
| Multicast | MROUTE | ✗ | — |  | — |
| Multicast | PIM | ✗ | — |  | — |
| Other | Cloud network interfaces | ○ | ○ |  | — |
| Other | PPPoE | ✗ | ✗ |  | — |
| Policy | NAT44 | ✗ | — |  | — |
| QoS | QoS | ✗ | — |  | — |
| Routing | BGP Advertised Routes | ○ | ○ |  | — |
| Routing | Fabric Path | ○ | — |  | — |
| Routing | Policy-based Routing | ✗ | ✗ |  | — |
| Routing | Route summary | ✓ | ✓ |  | CLI |
| Routing | Routing policies | ✗ | — |  | — |
| Routing | VRF | ✗ | — |  | — |
| Routing protocols | BGP neighbors | ✗ | ✗ |  | — |
| Routing protocols | EIGRP | ○ | ○ |  | — |
| Routing protocols | IS-IS | ✗ | ✗ |  | — |
| Routing protocols | Lisp | ○ | ○ |  | — |
| Routing protocols | OSPF | ✗ | — |  | — |
| Routing protocols | OSPFv3 | ✗ | ✗ |  | — |
| Routing protocols | RIP | ✗ | — |  | — |
| SDN | APIC | ○ | ○ |  | — |
| SDN | Cisco ACI | ○ | ○ |  | — |
| SDN | Virtual machines | ○ | — |  | — |
| SDN | VXLAN | ✗ | — |  | — |
| SDWAN | SD-WAN sites | ○ | — |  | — |
| Security | AAA | ✓ | ✗ |  | CLI |
| Security | ACL | ✗ | ✗ |  | — |
| Security | DHCPv4 Snooping | ✗ | ✗ |  | — |
| Security | DMVPN | ○ | ○ |  | — |
| Security | Error disabled interfaces | ✗ | — |  | — |
| Security | IPsec | ✗ | ✗ |  | — |
| Security | LSVPN | ○ | ○ |  | — |
| Security | Prefix lists | ✗ | ✗ |  | — |
| Security | Secured access ports | ✗ | — |  | — |
| Security | Storm control | ✗ | — |  | — |
| Security | STP port security | ✗ | — |  | — |
| Security | Virtual servers | ○ | ○ |  | — |
| Security | Zone firewall | ○ | ○ |  | — |
| Wireless | Wireless AP | ○ | — |  | — |
| Wireless | Wireless clients | ○ | — |  | — |
| Wireless | Wireless Controller with APs | ○ | — |  | — |

---

## All Families from fortinet

- [fortinet@fortigate](https://matrix.ipfabric.io/8.2.0/family/200121857)
- **fortinet@fortiswitch** *(current)*

---

## Legend

- **✓** = Fully Integrated
- **✗** = Not Yet Integrated
- **○** = Not Available
- **🆕** = New in this version
- **CLI** = SSH or Telnet session, **API** = vendor or controller API; in the Transport column, **✗** after one = not yet integrated over it, **—** = not integrated over any transport. A family reached over both may use the API together with CLI or instead of it.

*Generated: 2026-11-22T13:54:39.295Z*
