# Family: hpe aruba-iap — v8.2.0

**Version:** 8.2.0
**Vendor:** hpe
**Family:** aruba-iap
**New in this version:** No
**Transport:** CLI, API
**URL:** https://matrix.ipfabric.io/8.2.0/family/200121845

---

## Commands

| Task | Command | Notes | Transport |
|------|---------|-------|-----------|
| Routing table | `show aps` |  | CLI |
| Wireless Controller with APs | `show cluster bss-table` |  | CLI |
| Wireless Controller with APs | `show ip route` |  | CLI |
| Wireless Controller with APs | `show port status` |  | CLI |
| Wireless Controller with APs | `show port status details` |  | CLI |
| Wireless Controller with APs | `show summary` |  | CLI |
| Wireless Controller with APs | `show aps` |  | CLI |
| Wireless clients | `show clients debug` |  | CLI |
| Wireless clients | `show summary` |  | CLI |
| SN | `show summary` |  | CLI |
| SN | `GET /network-monitoring/v1/devices` | the tasker builds the ver from this call; the task sends no request of its own | API |
| Routing table | `show summary` |  | CLI |
| Routing table | `show ip route` |  | CLI |
| Initial device discovery | `show summary` |  | CLI |
| L2 Interfaces | `GET /network-monitoring/v1/aps/<serial-number>/ports` | wired ports only - no radio interfaces | API |
| Startup config | `show configuration` |  | CLI |
| Current config | `POST /network-troubleshooting/v1/aps/<serial-number>/showCommands` |  | API |
| Current config | `show running-config` |  | CLI, API |
| Configuration saved | `show configuration` |  | CLI |
| Configuration saved | `show running-config` |  | CLI |
| Device info | `show version` |  | CLI |
| Device info | `show summary` |  | CLI |
| Device info | `GET /network-monitoring/v1/devices` | the tasker builds the ver from this call; the task sends no request of its own | API |
| Initial device discovery | `GET /network-monitoring/v1/switches` | the tasker builds the ver from these calls; an MSP login first lists tenants with GET /workspaces/v1/msp-tenants | API |
| Initial device discovery | `GET /network-monitoring/v1/devices` | the tasker builds the ver from these calls; an MSP login first lists tenants with GET /workspaces/v1/msp-tenants | API |
| Initial device discovery | `show version` |  | CLI |

---

## Supported Tasks

| Category | Task | Status | IPv6 | Notes | Transport |
|----------|------|--------|------|-------|-----------|
| Basic discovery | ARP | ○ | — |  | — |
| Basic discovery | Device info | ✓ | — |  | CLI, API |
| Basic discovery | Disable pagination | ○ | — |  | — |
| Basic discovery | FHRP | ○ | ○ |  | — |
| Basic discovery | Initial device discovery | ✓ | — | API: family, model and version come from the tasker device list | CLI, API |
| Basic discovery | IPv6 Neighbor Discovery | ✗ | ✗ | API: no IPv6 neighbor command | — |
| Basic discovery | L2 Interfaces | ✓ | — | API: switches add VLAN interfaces, loopbacks and per-port MACs from the CLI-over-API runner; gateways add their VLAN interfaces as name-only rows in state unknown; APs are wired ports only | API |
| Basic discovery | L3 Interfaces | ○ | ○ |  | — |
| Basic discovery | Link aggregations | ○ | — |  | — |
| Basic discovery | MAC | ○ | — |  | — |
| Basic discovery | Neighbors | ○ | ○ |  | — |
| Basic discovery | Routing table | ✓ | ✗ | API: Aruba New Central; l3Interfaces does not run for access points | CLI, API ✗ |
| Basic discovery | Serial ports | ○ | — |  | — |
| Basic discovery | SN | ✓ | — |  | CLI, API |
| Basic discovery | STP | ○ | — |  | — |
| Basic discovery | Virtual Contexts | ○ | — |  | — |
| Basic discovery | Vlan | ○ | — |  | — |
| Configuration | Configuration saved | ✓ | — | API: runs over the API but always publishes N/A: deviceConfig/startup does not run over the API | CLI, API ✗ |
| Configuration | Current config | ✓ | — |  | CLI, API |
| Configuration | Startup config | ✓ | — |  | CLI, API ✗ |
| Hardware | Cluster | ○ | — |  | — |
| Hardware | End of Life data | ✓ | — | API: chassis part number only | CLI, API |
| Hardware | Extenders | ○ | — |  | — |
| Hardware | PoE | ○ | — |  | — |
| Hardware | Power supplies & fans | ○ | — |  | — |
| Hardware | Stacking | ○ | — |  | — |
| Hardware | Transceivers | ○ | — |  | — |
| Hardware | VSS | ○ | — |  | — |
| Hybrid discovery | snCheck | ○ | — |  | — |
| Management | DHCPv4 Relays | ✗ | ✗ |  | — |
| Management | DHCPv4 Servers | ✗ | ✗ |  | — |
| Management | DNS resolver | ✗ | ✗ |  | — |
| Management | IP Flow | ○ | ○ |  | — |
| Management | License | ○ | — |  | — |
| Management | NTP | ○ | ○ |  | — |
| Management | Port mirroring | ○ | — |  | — |
| Management | PTP | ○ | ○ |  | — |
| Management | SNMP | ○ | ○ |  | — |
| Management | Syslog | ○ | ○ |  | — |
| Management | Unidirectional Link Detection | ○ | — |  | — |
| MPLS | Circuit cross-connect | ○ | — |  | — |
| MPLS | MPLS forwarding | ○ | — |  | — |
| MPLS | MPLS LDP | ○ | — |  | — |
| MPLS | RSVP | ✗ | — |  | — |
| MPLS | VPLS | ○ | — |  | — |
| MPLS | VPWS | ○ | — |  | — |
| Multicast | IGMP | ○ | — |  | — |
| Multicast | IGMP Snooping | ○ | — |  | — |
| Multicast | MAC multicast address table | ○ | — |  | — |
| Multicast | MROUTE | ○ | — |  | — |
| Multicast | PIM | ○ | — |  | — |
| Other | Cloud network interfaces | ○ | ○ |  | — |
| Other | PPPoE | ○ | ○ |  | — |
| Policy | NAT44 | ✗ | — |  | — |
| QoS | QoS | ○ | — |  | — |
| Routing | BGP Advertised Routes | ○ | ○ |  | — |
| Routing | Fabric Path | ○ | — |  | — |
| Routing | Policy-based Routing | ○ | ○ |  | — |
| Routing | Route summary | ○ | ○ |  | — |
| Routing | Routing policies | ○ | — |  | — |
| Routing | VRF | ○ | — |  | — |
| Routing protocols | BGP neighbors | ○ | ○ |  | — |
| Routing protocols | EIGRP | ○ | ○ |  | — |
| Routing protocols | IS-IS | ○ | ○ |  | — |
| Routing protocols | Lisp | ○ | ○ |  | — |
| Routing protocols | OSPF | ○ | — |  | — |
| Routing protocols | OSPFv3 | ○ | ○ |  | — |
| Routing protocols | RIP | ○ | — |  | — |
| SDN | APIC | ○ | ○ |  | — |
| SDN | Cisco ACI | ○ | ○ |  | — |
| SDN | Virtual machines | ○ | — |  | — |
| SDN | VXLAN | ○ | — |  | — |
| SDWAN | SD-WAN sites | ○ | — |  | — |
| Security | AAA | ○ | ○ |  | — |
| Security | ACL | ○ | ○ |  | — |
| Security | DHCPv4 Snooping | ✗ | ✗ |  | — |
| Security | DMVPN | ○ | ○ |  | — |
| Security | Error disabled interfaces | ○ | — |  | — |
| Security | IPsec | ○ | ○ |  | — |
| Security | LSVPN | ○ | ○ |  | — |
| Security | Prefix lists | ○ | ○ |  | — |
| Security | Secured access ports | ○ | — |  | — |
| Security | Storm control | ○ | — |  | — |
| Security | STP port security | ○ | — |  | — |
| Security | Virtual servers | ○ | ○ |  | — |
| Security | Zone firewall | ○ | ○ |  | — |
| Wireless | Wireless AP | ○ | — |  | — |
| Wireless | Wireless clients | ✓ | — |  | CLI, API ✗ |
| Wireless | Wireless Controller with APs | ✓ | — |  | CLI, API ✗ |

---

## All Families from hpe

- [hpe@comware](https://matrix.ipfabric.io/8.2.0/family/200121830)
- [hpe@aruba](https://matrix.ipfabric.io/8.2.0/family/200121833)
- [hpe@arubasw](https://matrix.ipfabric.io/8.2.0/family/200121836)
- [hpe@arubacx](https://matrix.ipfabric.io/8.2.0/family/200121839)
- [hpe@3com](https://matrix.ipfabric.io/8.2.0/family/200121842)
- **hpe@aruba-iap** *(current)*

---

## Legend

- **✓** = Fully Integrated
- **✗** = Not Yet Integrated
- **○** = Not Available
- **🆕** = New in this version
- **CLI** = SSH or Telnet session, **API** = vendor or controller API; in the Transport column, **✗** after one = not yet integrated over it, **—** = not integrated over any transport. A family reached over both may use the API together with CLI or instead of it.

*Generated: 2026-11-22T13:54:33.180Z*
