# Family: hpe arubasw — v8.2.0

**Version:** 8.2.0
**Vendor:** hpe
**Family:** arubasw
**New in this version:** No
**Transport:** CLI, API
**URL:** https://matrix.ipfabric.io/8.2.0/family/200121836

---

## Commands

| Task | Command | Notes | Transport |
|------|---------|-------|-----------|
| MAC | `POST /network-troubleshooting/v1/aos-s/<serial-number>/showCommands` | Aruba New Central; the show command runs over the showCommands runner. The other commands are l2Interfaces dependencies, read to keep only entries on an interface it emits | API |
| Link aggregations | `show interfaces brief` |  | CLI |
| Link aggregations | `show trunks` |  | CLI |
| OSPF | `show running-config` |  | CLI |
| OSPF | `show ip` |  | CLI |
| OSPF | `show ip ospf neighbor detail` |  | CLI |
| OSPF | `show ip ospf interface <ipAddress>` |  | CLI |
| OSPF | `show ip ospf interface` |  | CLI |
| NTP | `show ntp associations` |  | CLI |
| Neighbors | `show lldp info remote-device <intName>` |  | CLI |
| Neighbors | `show lldp info remote-device` |  | CLI |
| Neighbors | `show lldp info remote-device detail` |  | CLI |
| Neighbors | `show cdp neighbors` |  | CLI |
| MAC | `GET /network-monitoring/v1/switches/<serial-number>/vlans` | Aruba New Central; the show command runs over the showCommands runner. The other commands are l2Interfaces dependencies, read to keep only entries on an interface it emits | API |
| MAC | `GET /network-monitoring/v1/switches/<serial-number>/lag` | Aruba New Central; the show command runs over the showCommands runner. The other commands are l2Interfaces dependencies, read to keep only entries on an interface it emits | API |
| MAC | `GET /network-monitoring/v1/switches/<serial-number>/interfaces` | Aruba New Central; the show command runs over the showCommands runner. The other commands are l2Interfaces dependencies, read to keep only entries on an interface it emits | API |
| Link aggregations | `GET /network-monitoring/v1/switches/<serial-number>/lag` | Aruba New Central. The LAG endpoint reports no protocol (type is null on LACP aggregates too), so poProto is empty; the channel state is derived - up when a member is up | API |
| MAC | `show running-config` | Aruba New Central; the show command runs over the showCommands runner. The other commands are l2Interfaces dependencies, read to keep only entries on an interface it emits | API |
| MAC | `show oobm ip` | Aruba New Central; the show command runs over the showCommands runner. The other commands are l2Interfaces dependencies, read to keep only entries on an interface it emits | API |
| MAC | `show oobm` | Aruba New Central; the show command runs over the showCommands runner. The other commands are l2Interfaces dependencies, read to keep only entries on an interface it emits | API |
| MAC | `show lldp info local-device` | Aruba New Central; the show command runs over the showCommands runner. The other commands are l2Interfaces dependencies, read to keep only entries on an interface it emits | API |
| MAC | `show ip route` | Aruba New Central; the show command runs over the showCommands runner. The other commands are l2Interfaces dependencies, read to keep only entries on an interface it emits | API |
| MAC | `show ip` | Aruba New Central; the show command runs over the showCommands runner. The other commands are l2Interfaces dependencies, read to keep only entries on an interface it emits | API |
| MAC | `show interfaces all` | Aruba New Central; the show command runs over the showCommands runner. The other commands are l2Interfaces dependencies, read to keep only entries on an interface it emits | API |
| MAC | `show vlans` | Aruba New Central; the show command runs over the showCommands runner. The other commands are l2Interfaces dependencies, read to keep only entries on an interface it emits | CLI, API |
| MAC | `show mac-address vlan <vlanId>` |  | CLI |
| MAC | `show mac-address` | Aruba New Central; the show command runs over the showCommands runner. The other commands are l2Interfaces dependencies, read to keep only entries on an interface it emits | CLI, API |
| L3 Interfaces | `GET /network-monitoring/v1/switches/<serial-number>/vlans` | the VLAN endpoint reports one primary IPv4 per VLAN, so the running-config supplies secondaries and loopbacks (IPv4 only) | API |
| L3 Interfaces | `POST /network-troubleshooting/v1/aos-s/<serial-number>/showCommands` | the VLAN endpoint reports one primary IPv4 per VLAN, so the running-config supplies secondaries and loopbacks (IPv4 only) | API |
| L3 Interfaces | `show running-config` | the VLAN endpoint reports one primary IPv4 per VLAN, so the running-config supplies secondaries and loopbacks (IPv4 only) | API |
| L3 Interfaces | `show oobm ip` | the VLAN endpoint reports one primary IPv4 per VLAN, so the running-config supplies secondaries and loopbacks (IPv4 only) | CLI, API |
| STP | `show spanning-tree` | Aruba New Central. show spanning-tree vlan <vlanId> for every VLAN in RPVST mode; the instance commands only in MSTP mode | CLI, API |
| Vlan | `GET /network-monitoring/v1/switches/<serial-number>/vlans` | Aruba New Central; id, name and operational status | API |
| Vlan | `show vlans` |  | CLI |
| Transceivers | `show interfaces transceiver detail` |  | CLI |
| Transceivers | `show interfaces transceiver` |  | CLI |
| Syslog | `show syslog config` |  | CLI |
| STP port security | `show spanning-tree detail` |  | CLI |
| STP | `POST /network-troubleshooting/v1/aos-s/<serial-number>/showCommands` | Aruba New Central. show spanning-tree vlan <vlanId> for every VLAN in RPVST mode; the instance commands only in MSTP mode | API |
| STP | `show vlans ports all detail` | Aruba New Central. show spanning-tree vlan <vlanId> for every VLAN in RPVST mode; the instance commands only in MSTP mode | CLI, API |
| STP | `show vlans` | Aruba New Central. show spanning-tree vlan <vlanId> for every VLAN in RPVST mode; the instance commands only in MSTP mode | CLI, API |
| STP | `show spanning-tree debug-counters instance <instance> ports all` | Aruba New Central. show spanning-tree vlan <vlanId> for every VLAN in RPVST mode; the instance commands only in MSTP mode | CLI, API |
| STP | `show spanning-tree instance <instance>` | Aruba New Central. show spanning-tree vlan <vlanId> for every VLAN in RPVST mode; the instance commands only in MSTP mode | CLI, API |
| STP | `show spanning-tree detail` |  | CLI |
| STP | `show spanning-tree mst-config` | Aruba New Central. show spanning-tree vlan <vlanId> for every VLAN in RPVST mode; the instance commands only in MSTP mode | CLI, API |
| STP | `show spanning-tree vlan <vlanId>` | Aruba New Central. show spanning-tree vlan <vlanId> for every VLAN in RPVST mode; the instance commands only in MSTP mode | CLI, API |
| STP | `show spanning-tree config` | Aruba New Central. show spanning-tree vlan <vlanId> for every VLAN in RPVST mode; the instance commands only in MSTP mode | CLI, API |
| L3 Interfaces | `show vrrp vlan <vlan> vrid <vrid> config` |  | CLI |
| Stacking | `show vsf link` |  | CLI |
| Stacking | `show vsf detail` |  | CLI |
| Stacking | `show stacking` |  | CLI |
| SNMP | `show running-configuration` |  | CLI |
| SN | `show system` |  | CLI |
| SN | `GET /network-monitoring/v1/devices` | the tasker builds the ver from this call; the task sends no request of its own | API |
| Routing table | `GET /network-monitoring/v1/switches/<serial-number>/vlans` | Aruba New Central; the show commands run over the showCommands runner. show running-config and the VLAN endpoint are l3Interfaces dependencies, read to keep only CEF entries on an interface it emits | API |
| Routing table | `POST /network-troubleshooting/v1/aos-s/<serial-number>/showCommands` | Aruba New Central; the show commands run over the showCommands runner. show running-config and the VLAN endpoint are l3Interfaces dependencies, read to keep only CEF entries on an interface it emits | API |
| Routing table | `show running-config` | Aruba New Central; the show commands run over the showCommands runner. show running-config and the VLAN endpoint are l3Interfaces dependencies, read to keep only CEF entries on an interface it emits | API |
| Routing table | `show ipv6 route` | Aruba New Central; the show commands run over the showCommands runner. show running-config and the VLAN endpoint are l3Interfaces dependencies, read to keep only CEF entries on an interface it emits | API |
| Routing table | `show oobm ip` | Aruba New Central; the show commands run over the showCommands runner. show running-config and the VLAN endpoint are l3Interfaces dependencies, read to keep only CEF entries on an interface it emits | CLI, API |
| Routing table | `show vlans` | Aruba New Central; the show commands run over the showCommands runner. show running-config and the VLAN endpoint are l3Interfaces dependencies, read to keep only CEF entries on an interface it emits | CLI, API |
| Routing table | `show ip route` | Aruba New Central; the show commands run over the showCommands runner. show running-config and the VLAN endpoint are l3Interfaces dependencies, read to keep only CEF entries on an interface it emits | CLI, API |
| Link aggregations | `GET /network-monitoring/v1/switches/<serial-number>/interfaces` | Aruba New Central. The LAG endpoint reports no protocol (type is null on LACP aggregates too), so poProto is empty; the channel state is derived - up when a member is up | API |
| ARP | `show oobm ip` | Aruba New Central; one show arp vlan per SVI l3Interfaces emits, over the showCommands runner. The running-config, show oobm ip and the VLAN endpoint are its dependencies, read to keep only entries on an interface it emits | API |
| Startup config | `show config` |  | CLI |
| Current config | `POST /network-troubleshooting/v1/aos-s/<serial-number>/showCommands` |  | API |
| Current config | `show running-config` |  | CLI, API |
| Configuration saved | `show running-config` |  | CLI |
| Configuration saved | `show config` |  | CLI |
| Device info | `show lldp info local-device` | the members of a 5400R chassis are collected by "show vsf detail", the rest of the family uses "show stacking" | CLI |
| Device info | `show vsf detail` | the members of a 5400R chassis are collected by "show vsf detail", the rest of the family uses "show stacking" | CLI |
| Device info | `show stacking` | the members of a 5400R chassis are collected by "show vsf detail", the rest of the family uses "show stacking" | CLI |
| Device info | `show console` | the members of a 5400R chassis are collected by "show vsf detail", the rest of the family uses "show stacking" | CLI |
| Device info | `show tech buffer` | the members of a 5400R chassis are collected by "show vsf detail", the rest of the family uses "show stacking" | CLI |
| Device info | `show modules` | the members of a 5400R chassis are collected by "show vsf detail", the rest of the family uses "show stacking" | CLI |
| Device info | `show system` | the members of a 5400R chassis are collected by "show vsf detail", the rest of the family uses "show stacking" | CLI |
| Device info | `GET /network-monitoring/v1/devices` | the tasker builds the ver from this call; the task sends no request of its own | API |
| ARP | `GET /network-monitoring/v1/switches/<serial-number>/vlans` | Aruba New Central; one show arp vlan per SVI l3Interfaces emits, over the showCommands runner. The running-config, show oobm ip and the VLAN endpoint are its dependencies, read to keep only entries on an interface it emits | API |
| ARP | `POST /network-troubleshooting/v1/aos-s/<serial-number>/showCommands` | Aruba New Central; one show arp vlan per SVI l3Interfaces emits, over the showCommands runner. The running-config, show oobm ip and the VLAN endpoint are its dependencies, read to keep only entries on an interface it emits | API |
| DHCPv4 Relays | `show ip helper-address` |  | CLI |
| ARP | `show arp vlan <vlanId>` | Aruba New Central; one show arp vlan per SVI l3Interfaces emits, over the showCommands runner. The running-config, show oobm ip and the VLAN endpoint are its dependencies, read to keep only entries on an interface it emits | API |
| ARP | `show vlans` |  | CLI |
| ARP | `show running-config` | Aruba New Central; one show arp vlan per SVI l3Interfaces emits, over the showCommands runner. The running-config, show oobm ip and the VLAN endpoint are its dependencies, read to keep only entries on an interface it emits | CLI, API |
| ARP | `show mac-address vlan <vlanId>` |  | CLI |
| ARP | `show ip` |  | CLI |
| ARP | `show arp` |  | CLI |
| AAA | `show password-configuration` |  | CLI |
| Initial device discovery | `GET /network-monitoring/v1/switches` | the tasker builds the ver from these calls; an MSP login first lists tenants with GET /workspaces/v1/msp-tenants | API |
| Initial device discovery | `GET /network-monitoring/v1/devices` | the tasker builds the ver from these calls; an MSP login first lists tenants with GET /workspaces/v1/msp-tenants | API |
| Initial device discovery | `show lldp info local-device` |  | CLI |
| Initial device discovery | `show tech buffers` |  | CLI |
| Initial device discovery | `show modules` |  | CLI |
| Initial device discovery | `show stacking` |  | CLI |
| Initial device discovery | `show version` |  | CLI |
| L2 Interfaces | `show run` |  | CLI |
| L3 Interfaces | `show vrrp` |  | CLI |
| L3 Interfaces | `show vlans` |  | CLI |
| L3 Interfaces | `show ip` |  | CLI |
| L3 Interfaces | `show run` |  | CLI |
| L2 Interfaces | `GET /network-monitoring/v1/switches/<serial-number>/vlans` | physical ports and LAGs from the API, VLAN interfaces, loopbacks, oobm, per-port MACs and counters from the CLI; any other l3Interfaces row gets a name-only row in state unknown | API |
| L2 Interfaces | `GET /network-monitoring/v1/switches/<serial-number>/lag` | physical ports and LAGs from the API, VLAN interfaces, loopbacks, oobm, per-port MACs and counters from the CLI; any other l3Interfaces row gets a name-only row in state unknown | API |
| L2 Interfaces | `GET /network-monitoring/v1/switches/<serial-number>/interfaces` | physical ports and LAGs from the API, VLAN interfaces, loopbacks, oobm, per-port MACs and counters from the CLI; any other l3Interfaces row gets a name-only row in state unknown | API |
| L2 Interfaces | `POST /network-troubleshooting/v1/aos-s/<serial-number>/showCommands` | physical ports and LAGs from the API, VLAN interfaces, loopbacks, oobm, per-port MACs and counters from the CLI; any other l3Interfaces row gets a name-only row in state unknown | API |
| L2 Interfaces | `show running-config` | physical ports and LAGs from the API, VLAN interfaces, loopbacks, oobm, per-port MACs and counters from the CLI; any other l3Interfaces row gets a name-only row in state unknown | API |
| L2 Interfaces | `show oobm ip` | physical ports and LAGs from the API, VLAN interfaces, loopbacks, oobm, per-port MACs and counters from the CLI; any other l3Interfaces row gets a name-only row in state unknown | API |
| L2 Interfaces | `show ip route` | physical ports and LAGs from the API, VLAN interfaces, loopbacks, oobm, per-port MACs and counters from the CLI; any other l3Interfaces row gets a name-only row in state unknown | API |
| L2 Interfaces | `show oobm` | physical ports and LAGs from the API, VLAN interfaces, loopbacks, oobm, per-port MACs and counters from the CLI; any other l3Interfaces row gets a name-only row in state unknown | CLI, API |
| L2 Interfaces | `show lldp info local-device` | physical ports and LAGs from the API, VLAN interfaces, loopbacks, oobm, per-port MACs and counters from the CLI; any other l3Interfaces row gets a name-only row in state unknown | CLI, API |
| L2 Interfaces | `show ip` | physical ports and LAGs from the API, VLAN interfaces, loopbacks, oobm, per-port MACs and counters from the CLI; any other l3Interfaces row gets a name-only row in state unknown | CLI, API |
| Disable pagination | `no page` |  | CLI |
| L2 Interfaces | `show vlans <id>` |  | CLI |
| L2 Interfaces | `show vlans` | physical ports and LAGs from the API, VLAN interfaces, loopbacks, oobm, per-port MACs and counters from the CLI; any other l3Interfaces row gets a name-only row in state unknown | CLI, API |
| L2 Interfaces | `show vlans ports all detail` |  | CLI |
| L2 Interfaces | `show interfaces brief` |  | CLI |
| L2 Interfaces | `show interfaces all` | physical ports and LAGs from the API, VLAN interfaces, loopbacks, oobm, per-port MACs and counters from the CLI; any other l3Interfaces row gets a name-only row in state unknown | CLI, API |
| FHRP | `show ip` |  | CLI |
| FHRP | `show run` |  | CLI |
| FHRP | `show vrrp vlan <vlan> vrid <vrid> config` |  | CLI |
| FHRP | `show vrrp` |  | CLI |
| DNS resolver | `show ip dns` |  | CLI |
| DHCPv4 Snooping | `show dhcp-snooping stats` |  | CLI |
| DHCPv4 Snooping | `show dhcp-snooping binding` |  | CLI |
| DHCPv4 Snooping | `show dhcp-snooping` |  | CLI |
| DHCPv4 Relays | `show dhcp-relay` |  | CLI |

---

## Supported Tasks

| Category | Task | Status | IPv6 | Notes | Transport |
|----------|------|--------|------|-------|-----------|
| Basic discovery | ARP | ✓ | — | API: Aruba New Central, over the showCommands runner - no API endpoint carries ARP. Only entries on an interface l3Interfaces emits are kept. CX reads all-vrfs, which omits the mgmt VRF, and its allow-list refuses show arp vrf <name>. The AOS-S oobm ARP table is not read. aruba-iap has no L3 interface source, so it stays n/a | CLI, API |
| Basic discovery | Device info | ✓ | — |  | CLI, API |
| Basic discovery | Disable pagination | ✓ | — |  | CLI |
| Basic discovery | FHRP | ✓ | ✗ | CLI: Supported only on models 3800 and higher | CLI, API ✗ |
| Basic discovery | Initial device discovery | ✓ | — | API: family, model and version come from the tasker device list | CLI, API |
| Basic discovery | IPv6 Neighbor Discovery | ✗ | ✗ | API: the ND cache names the physical port, which no API source resolves to an SVI | — |
| Basic discovery | L2 Interfaces | ✓ | — | API: switches add VLAN interfaces, loopbacks and per-port MACs from the CLI-over-API runner; gateways add their VLAN interfaces as name-only rows in state unknown; APs are wired ports only | CLI, API |
| Basic discovery | L3 Interfaces | ✓ | ✗ | API: Aruba New Central; secondaries and loopbacks from `show running-config`, oobm from `show oobm ip` in `__oob-management`; IPv4 only, every other interface in the native VRF | CLI, API |
| Basic discovery | Link aggregations | ✓ | — | API: Aruba New Central switches. Port channels and members only - no protocol and no MLAG/VSX source in the API | CLI, API |
| Basic discovery | MAC | ✓ | — | API: Aruba New Central, over the showCommands runner - no API endpoint carries the MAC table. Only entries on an interface l2Interfaces emits are kept. CX VXLAN entries keep their VTEP but carry no VNI, the vxlan task has no API path. Gateway rows carry no source, and gateway rows on a port-channel or tunnel are not read. AOS-S has no per-VLAN fallback. aruba-iap stays n/a | CLI, API |
| Basic discovery | Neighbors | ✓ | ✗ |  | CLI, API ✗ |
| Basic discovery | Routing table | ✓ | ✓ | API: Aruba New Central, over the showCommands runner - no API endpoint carries the routing table. CEF entries on an interface l3Interfaces does not emit are dropped and reported, which today includes an SVI with only an IPv6 address | CLI, API |
| Basic discovery | Serial ports | ○ | — |  | — |
| Basic discovery | SN | ✓ | — |  | CLI, API |
| Basic discovery | STP | ✓ | — | stp info does not provide designated port id - xDP is needed for topology build | CLI, API |
| Basic discovery | Virtual Contexts | ○ | — |  | — |
| Basic discovery | Vlan | ✓ | — | API: Aruba New Central; id, name and operational status on every family, the gateway name coming from `show vlan` rather than the API. `dscr` is on no endpoint, and aruba-iap has no VLAN source at all, so it stays n/a | CLI, API |
| Configuration | Configuration saved | ✓ | — | API: runs over the API but always publishes N/A: deviceConfig/startup does not run over the API | CLI, API ✗ |
| Configuration | Current config | ✓ | — |  | CLI, API |
| Configuration | Startup config | ✓ | — |  | CLI, API ✗ |
| Hardware | Cluster | ○ | — |  | — |
| Hardware | End of Life data | ✓ | — | API: chassis part number only | CLI, API |
| Hardware | Extenders | ○ | — |  | — |
| Hardware | PoE | ✗ | — |  | — |
| Hardware | Power supplies & fans | ✗ | — |  | — |
| Hardware | Stacking | ✓ | — |  | CLI, API ✗ |
| Hardware | Transceivers | ✓ | — |  | CLI, API ✗ |
| Hardware | VSS | ○ | — |  | — |
| Hybrid discovery | snCheck | ○ | — |  | — |
| Management | DHCPv4 Relays | ✓ | ✗ |  | CLI, API ✗ |
| Management | DHCPv4 Servers | ✗ | ✗ |  | — |
| Management | DNS resolver | ✓ | ✗ |  | CLI, API ✗ |
| Management | IP Flow | ○ | ○ |  | — |
| Management | License | ○ | — |  | — |
| Management | NTP | ✓ | ✗ |  | CLI, API ✗ |
| Management | Port mirroring | ✗ | — |  | — |
| Management | PTP | ✗ | ✗ |  | — |
| Management | SNMP | ✓ | ✗ |  | CLI, API ✗ |
| Management | Syslog | ✓ | ✗ |  | CLI, API ✗ |
| Management | Unidirectional Link Detection | ✗ | — |  | — |
| MPLS | Circuit cross-connect | ○ | — |  | — |
| MPLS | MPLS forwarding | ○ | — |  | — |
| MPLS | MPLS LDP | ○ | — |  | — |
| MPLS | RSVP | ✗ | — |  | — |
| MPLS | VPLS | ○ | — |  | — |
| MPLS | VPWS | ○ | — |  | — |
| Multicast | IGMP | ✗ | — |  | — |
| Multicast | IGMP Snooping | ✗ | — |  | — |
| Multicast | MAC multicast address table | ○ | — |  | — |
| Multicast | MROUTE | ✗ | — |  | — |
| Multicast | PIM | ✗ | — |  | — |
| Other | Cloud network interfaces | ○ | ○ |  | — |
| Other | PPPoE | ✗ | ✗ |  | — |
| Policy | NAT44 | ✗ | — |  | — |
| QoS | QoS | ✗ | — |  | — |
| Routing | BGP Advertised Routes | ○ | ○ |  | — |
| Routing | Fabric Path | ○ | — |  | — |
| Routing | Policy-based Routing | ○ | ○ |  | — |
| Routing | Route summary | ✗ | ✗ |  | — |
| Routing | Routing policies | ○ | — |  | — |
| Routing | VRF | ○ | — |  | — |
| Routing protocols | BGP neighbors | ○ | ○ |  | — |
| Routing protocols | EIGRP | ○ | ○ |  | — |
| Routing protocols | IS-IS | ○ | ○ |  | — |
| Routing protocols | Lisp | ○ | ○ |  | — |
| Routing protocols | OSPF | ✓ | — |  | CLI, API ✗ |
| Routing protocols | OSPFv3 | ✗ | ✗ |  | — |
| Routing protocols | RIP | ○ | — |  | — |
| SDN | APIC | ○ | ○ |  | — |
| SDN | Cisco ACI | ○ | ○ |  | — |
| SDN | Virtual machines | ○ | — |  | — |
| SDN | VXLAN | ✗ | — |  | — |
| SDWAN | SD-WAN sites | ○ | — |  | — |
| Security | AAA | ✗ | ✗ | CLI: only password strength | — |
| Security | ACL | ✗ | ✗ |  | — |
| Security | DHCPv4 Snooping | ✓ | ✗ |  | CLI, API ✗ |
| Security | DMVPN | ○ | ○ |  | — |
| Security | Error disabled interfaces | ✗ | — |  | — |
| Security | IPsec | ○ | ○ |  | — |
| Security | LSVPN | ○ | ○ |  | — |
| Security | Prefix lists | ○ | ○ |  | — |
| Security | Secured access ports | ✗ | — |  | — |
| Security | Storm control | ✗ | — |  | — |
| Security | STP port security | ✓ | — |  | CLI, API ✗ |
| Security | Virtual servers | ○ | ○ |  | — |
| Security | Zone firewall | ○ | ○ |  | — |
| Wireless | Wireless AP | ○ | — |  | — |
| Wireless | Wireless clients | ○ | — |  | — |
| Wireless | Wireless Controller with APs | ○ | — |  | — |

---

## All Families from hpe

- [hpe@comware](https://matrix.ipfabric.io/8.2.0/family/200121830)
- [hpe@aruba](https://matrix.ipfabric.io/8.2.0/family/200121833)
- **hpe@arubasw** *(current)*
- [hpe@arubacx](https://matrix.ipfabric.io/8.2.0/family/200121839)
- [hpe@3com](https://matrix.ipfabric.io/8.2.0/family/200121842)
- [hpe@aruba-iap](https://matrix.ipfabric.io/8.2.0/family/200121845)

---

## Legend

- **✓** = Fully Integrated
- **✗** = Not Yet Integrated
- **○** = Not Available
- **🆕** = New in this version
- **CLI** = SSH or Telnet session, **API** = vendor or controller API; in the Transport column, **✗** after one = not yet integrated over it, **—** = not integrated over any transport. A family reached over both may use the API together with CLI or instead of it.

*Generated: 2026-11-22T13:54:36.828Z*
