Family: hpe aruba (v8.2.0) ================================================== Vendor: hpe Family: aruba Transport: CLI, API New: No Commands: -------------------------------------------------- Neighbors: show lldp neighbor [CLI] SN: show inventory [CLI] SN: GET /network-monitoring/v1/devices [the tasker builds the ver from this call; the task sends no request of its own] [API] Routing table: GET /network-monitoring/v1/gateways//vlans [Aruba New Central; show ip route runs over the showCommands runner. The VLAN endpoint is an l3Interfaces dependency, read to keep only CEF entries on an interface it emits] [API] Routing table: POST /network-troubleshooting/v1/gateways//showCommands [Aruba New Central; show ip route runs over the showCommands runner. The VLAN endpoint is an l3Interfaces dependency, read to keep only CEF entries on an interface it emits] [API] Routing table: show ip route [Aruba New Central; show ip route runs over the showCommands runner. The VLAN endpoint is an l3Interfaces dependency, read to keep only CEF entries on an interface it emits] [API] Link aggregations: show interface [CLI] Link aggregations: show vlan status [CLI] Link aggregations: show port stats [CLI] NTP: show ntp servers [CLI] Neighbors: show lldp neighbor interface detail [CLI] SNMP: show running-configuration [CLI] IPv6 Neighbor Discovery: GET /network-monitoring/v1/gateways//vlans [Aruba New Central; the show command runs over the showCommands runner. The VLAN endpoint is read to keep only neighbours on an interface l3Interfaces also emits] [API] IPv6 Neighbor Discovery: POST /network-troubleshooting/v1/gateways//showCommands [Aruba New Central; the show command runs over the showCommands runner. The VLAN endpoint is read to keep only neighbours on an interface l3Interfaces also emits] [API] IPv6 Neighbor Discovery: show ipv6 neighbors [Aruba New Central; the show command runs over the showCommands runner. The VLAN endpoint is read to keep only neighbours on an interface l3Interfaces also emits] [API] MAC: GET /network-monitoring/v1/gateways//vlans [Aruba New Central; the show command runs over the showCommands runner. The other commands are l2Interfaces dependencies, read to keep only entries on an interface it emits] [API] MAC: GET /network-monitoring/v1/gateways//ports [Aruba New Central; the show command runs over the showCommands runner. The other commands are l2Interfaces dependencies, read to keep only entries on an interface it emits] [API] MAC: POST /network-troubleshooting/v1/gateways//showCommands [Aruba New Central; the show command runs over the showCommands runner. The other commands are l2Interfaces dependencies, read to keep only entries on an interface it emits] [API] MAC: show datapath bridge [Aruba New Central; the show command runs over the showCommands runner. The other commands are l2Interfaces dependencies, read to keep only entries on an interface it emits] [CLI, API] L3 Interfaces: GET /network-monitoring/v1/gateways//vlans [API] L3 Interfaces: show ip interface brief [CLI] Wireless clients: show ap association client-mac [CLI] Wireless Controller with APs: show ip interface brief [CLI] Wireless Controller with APs: show ap bss-table [CLI] Wireless Controller with APs: show ap debug lacp ap-name [CLI] Wireless Controller with APs: show ap lldp neighbors [CLI] Wireless Controller with APs: show ap debug system-status ap-name [CLI] Wireless Controller with APs: show ap port status ap-name [CLI] Wireless Controller with APs: show ap image version [CLI] Wireless Controller with APs: show ap details ap-name [CLI] Wireless Controller with APs: show ap active [CLI] L3 Interfaces: show vlan status [CLI] Wireless clients: show ap details ap-name [CLI] Wireless clients: show ap association [CLI] Wireless clients: show wlan summary [CLI] Wireless clients: show wlan [CLI] Wireless clients: show ap active [CLI] Vlan: POST /network-troubleshooting/v1/gateways//showCommands [Aruba New Central; the endpoint names no VLAN, so `show vlan` over the showCommands runner supplies the names] [API] Vlan: GET /network-monitoring/v1/gateways//vlans [Aruba New Central; the endpoint names no VLAN, so `show vlan` over the showCommands runner supplies the names] [API] Vlan: show vlan [Aruba New Central; the endpoint names no VLAN, so `show vlan` over the showCommands runner supplies the names] [CLI, API] Syslog: show logging server [CLI] Device info: show telnet [CLI] DHCPv4 Relays: show vlan status [CLI] Startup config: show configuration [CLI] Startup config: show startup-config [CLI] Current config: POST /network-troubleshooting/v1/gateways//showCommands [API] Current config: show running-config [CLI, API] Configuration saved: show configuration [Commands are dependend on version] [CLI] Configuration saved: show running-config [Commands are dependend on version] [CLI] Configuration saved: show startup-config [Commands are dependend on version] [CLI] Device info: show inventory [CLI] Device info: show slots [CLI] DHCPv4 Relays: show port stats [CLI] Device info: show hostname [CLI] Device info: show version [CLI] Device info: GET /network-monitoring/v1/devices [the tasker builds the ver from this call; the task sends no request of its own] [API] ARP: GET /network-monitoring/v1/gateways//vlans [Aruba New Central; the show command runs over the showCommands runner. The VLAN endpoint is the l3Interfaces dependency, read to keep only entries on an interface it emits] [API] ARP: POST /network-troubleshooting/v1/gateways//showCommands [Aruba New Central; the show command runs over the showCommands runner. The VLAN endpoint is the l3Interfaces dependency, read to keep only entries on an interface it emits] [API] ARP: show arp [Aruba New Central; the show command runs over the showCommands runner. The VLAN endpoint is the l3Interfaces dependency, read to keep only entries on an interface it emits] [CLI, API] Initial device discovery: GET /network-monitoring/v1/switches [the tasker builds the ver from these calls; an MSP login first lists tenants with GET /workspaces/v1/msp-tenants] [API] Initial device discovery: GET /network-monitoring/v1/devices [the tasker builds the ver from these calls; an MSP login first lists tenants with GET /workspaces/v1/msp-tenants] [API] Initial device discovery: show version [CLI] L2 Interfaces: show port stats [CLI] L3 Interfaces: show port stats [CLI] L3 Interfaces: show interface [CLI] L3 Interfaces: show vrrp [CLI] L2 Interfaces: GET /network-monitoring/v1/gateways//vlans [physical ports from the API; VLAN interfaces as name-only rows in state unknown; no port-channel interfaces] [API] L2 Interfaces: GET /network-monitoring/v1/gateways//ports [physical ports from the API; VLAN interfaces as name-only rows in state unknown; no port-channel interfaces] [API] L2 Interfaces: show datapath bridge [CLI] L2 Interfaces: show interface loopback [CLI] L2 Interfaces: show interface [CLI] L2 Interfaces: show vlan status [CLI] Disable pagination: no paging [CLI] IP Flow: show ip-flow-export-profile [CLI] FHRP: show ip interface brief [CLI] FHRP: show vlan status [CLI] FHRP: show port stats [CLI] FHRP: show interface [CLI] FHRP: show vrrp [CLI] DNS resolver: show ap system-profile [CLI] DNS resolver: show ap system-profile [CLI] DHCPv4 Relays: show interface [CLI] Task Support: -------------------------------------------------- Basic discovery: ✓ ARP [CLI, API] ✓ Device info [CLI, API] ✓ Disable pagination [CLI] ✓ FHRP (IPv6: ✗) [CLI, API ✗] ✓ Initial device discovery [CLI, API] ✓ IPv6 Neighbor Discovery (IPv6: ✓) [CLI ✗, API] ✓ L2 Interfaces [CLI, API] ✓ L3 Interfaces (IPv6: ✓) [CLI, API] ✓ Link aggregations [CLI, API ✗] ✓ MAC [CLI, API] ✓ Neighbors (IPv6: ✗) [CLI, API ✗] ✓ Routing table (IPv6: ✗) [CLI ✗, API] ○ Serial ports ✓ SN [CLI, API] ○ STP ○ Virtual Contexts ✓ Vlan [CLI, API] Configuration: ✓ Configuration saved [CLI, API ✗] ✓ Current config [CLI, API] ✓ Startup config [CLI, API ✗] Hardware: ○ Cluster ✓ End of Life data [CLI, API] ○ Extenders ○ PoE ✗ Power supplies & fans ✗ Stacking ✗ Transceivers ○ VSS Hybrid discovery: ○ snCheck Management: ✓ DHCPv4 Relays (IPv6: ✗) [CLI, API ✗] ✗ DHCPv4 Servers (IPv6: ✗) ✓ DNS resolver (IPv6: ✗) [CLI, API ✗] ✓ IP Flow (IPv6: ✗) [CLI, API ✗] ○ License ✓ NTP (IPv6: ✗) [CLI, API ✗] ✗ Port mirroring ○ PTP (IPv6: ○) ✓ SNMP (IPv6: ✗) [CLI, API ✗] ✓ Syslog (IPv6: ✗) [CLI, API ✗] ✗ Unidirectional Link Detection MPLS: ○ Circuit cross-connect ○ MPLS forwarding ○ MPLS LDP ○ RSVP ○ VPLS ○ VPWS Multicast: ✗ IGMP ✗ IGMP Snooping ○ MAC multicast address table ✗ MROUTE ✗ PIM Other: ○ Cloud network interfaces (IPv6: ○) ✗ PPPoE (IPv6: ✗) Policy: ✗ NAT44 QoS: ✗ QoS Routing: ○ BGP Advertised Routes (IPv6: ○) ○ Fabric Path ○ Policy-based Routing (IPv6: ○) ✗ Route summary (IPv6: ✗) ○ Routing policies ○ VRF Routing protocols: ○ BGP neighbors (IPv6: ○) ○ EIGRP (IPv6: ○) ○ IS-IS (IPv6: ○) ○ Lisp (IPv6: ○) ✗ OSPF ✗ OSPFv3 (IPv6: ✗) ○ RIP SDN: ○ APIC (IPv6: ○) ○ Cisco ACI (IPv6: ○) ○ Virtual machines ○ VXLAN SDWAN: ✗ SD-WAN sites Security: ✗ AAA (IPv6: ✗) ✗ ACL (IPv6: ✗) ✗ DHCPv4 Snooping (IPv6: ✗) ○ DMVPN (IPv6: ○) ✗ Error disabled interfaces ○ IPsec (IPv6: ○) ○ LSVPN (IPv6: ○) ○ Prefix lists (IPv6: ○) ○ Secured access ports ○ Storm control ✗ STP port security ○ Virtual servers (IPv6: ○) ○ Zone firewall (IPv6: ○) Wireless: ✗ Wireless AP ✓ Wireless clients [CLI, API ✗] ✓ Wireless Controller with APs [CLI, API ✗] All Families from hpe: -------------------------------------------------- hpe@comware hpe@aruba <-- current hpe@arubasw hpe@arubacx hpe@3com hpe@aruba-iap Legend: ✓=Full, ✗=Not Yet, ○=N/A Transport: [CLI] = SSH or Telnet session, [API] = vendor or controller API, ✗ after one = not yet integrated over it