# Family: fs fsos — v8.2.0

**Version:** 8.2.0
**Vendor:** fs
**Family:** fsos
**New in this version:** No
**Transport:** CLI
**URL:** https://matrix.ipfabric.io/8.2.0/family/200121818

---

## Commands

| Task | Command | Notes | Transport |
|------|---------|-------|-----------|
| Link aggregations | `show mlag interface` |  | CLI |
| Routing table | `show management interface` |  | CLI |
| Routing table | `show ip vrf` |  | CLI |
| Routing table | `show ip interface` |  | CLI |
| Routing table | `show ip route vrf <vrfname> summary` |  | CLI |
| Routing table | `show ip route summary` |  | CLI |
| Routing table | `show ip route vrf <vrfname> <protocol>` |  | CLI |
| Routing table | `show ip route vrf <vrfname>` |  | CLI |
| Routing table | `show ip route <protocol>` |  | CLI |
| Routing table | `show ip route` |  | CLI |
| Route summary | `show ip vrf` |  | CLI |
| Route summary | `show ip route vrf <vrfname> summary` |  | CLI |
| Route summary | `show ip route summary` |  | CLI |
| Port mirroring | `show running-config` |  | CLI |
| Link aggregations | `show mlag peer` |  | CLI |
| Routing table | `show running-config` |  | CLI |
| Link aggregations | `show mlag` |  | CLI |
| Link aggregations | `show aggregator-group detail` |  | CLI |
| Link aggregations | `show aggregatePort summary` |  | CLI |
| Link aggregations | `show channel-group summary` |  | CLI |
| Link aggregations | `show aggregator-group summary` |  | CLI |
| Link aggregations | `show interfaces` |  | CLI |
| Link aggregations | `show interface` |  | CLI |
| OSPF | `show ip vrf` |  | CLI |
| OSPF | `show ip ospf interface` |  | CLI |
| OSPF | `show ip ospf neighbor detail` |  | CLI |
| NTP | `show ntp status` |  | CLI |
| NTP | `show ntp associations` |  | CLI |
| Neighbors | `show mac-address-table` |  | CLI |
| STP | `show vlan` |  | CLI |
| VRF | `show running-config` |  | CLI |
| VRF | `show ip vrf detail` |  | CLI |
| VRF | `show ip vrf` |  | CLI |
| Vlan | `show vlan all` |  | CLI |
| Vlan | `show vlan` |  | CLI |
| Transceivers | `show interfaces` | transceiver DDM info is embedded in "show interface" output - no dedicated command exists | CLI |
| Transceivers | `show interface` | transceiver DDM info is embedded in "show interface" output - no dedicated command exists | CLI |
| Syslog | `show ip vrf` |  | CLI |
| Syslog | `show running-config` |  | CLI |
| STP port security | `show running-config` |  | CLI |
| STP port security | `show interfaces` |  | CLI |
| STP port security | `show interface` |  | CLI |
| STP | `show vlan all` |  | CLI |
| Neighbors | `show mac address-table` |  | CLI |
| STP | `show spanning-tree counters` |  | CLI |
| STP | `show spanning-tree summary` |  | CLI |
| STP | `show spanning-tree mstp region` |  | CLI |
| STP | `show spanning-tree mst detail` |  | CLI |
| STP | `show spanning-tree mst brief` |  | CLI |
| STP | `show spanning-tree interface <interface>` |  | CLI |
| STP | `show spanning-tree detail` |  | CLI |
| STP | `show spanning-tree brief` |  | CLI |
| STP | `show spanning-tree all` |  | CLI |
| STP | `show spanning-tree` |  | CLI |
| Storm control | `show running-config` |  | CLI |
| SNMP | `show running-config` |  | CLI |
| SN | `show version` |  | CLI |
| ARP | `show management arp` |  | CLI |
| Device info | `show services` |  | CLI |
| Device info | `show reboot-reason all` |  | CLI |
| Device info | `show reboot-info` |  | CLI |
| Device info | `show system summary` |  | CLI |
| Device info | `show processes memory sorted` |  | CLI |
| Device info | `show route-mac` |  | CLI |
| Device info | `show ip sockets` |  | CLI |
| Device info | `show version` |  | CLI |
| BGP neighbors | `show ip vrf` |  | CLI |
| BGP neighbors | `show running-config` |  | CLI |
| BGP neighbors | `show ip bgp vrf <vrfname> neighbors` |  | CLI |
| BGP neighbors | `show ip bgp vpnv4 vrf <vrfname> neighbors` |  | CLI |
| BGP neighbors | `show ip bgp ipv6 unicast neighbors` |  | CLI |
| BGP neighbors | `show ip bgp neighbors` |  | CLI |
| Device info | `show sysmac` |  | CLI |
| ARP | `show ip arp vrf <vrfName>` |  | CLI |
| ARP | `show arp vrf <vrfname>` |  | CLI |
| ARP | `show ip arp` |  | CLI |
| ARP | `show arp` |  | CLI |
| ACL | `show ip interface` |  | CLI |
| ACL | `show running-config` |  | CLI |
| ACL | `show ipv6 access-list` |  | CLI |
| ACL | `show ip access-list` |  | CLI |
| AAA | `show running-config` |  | CLI |
| Initial device discovery | `enable` |  | CLI |
| Initial device discovery | `terminal width 0` |  | CLI |
| Initial device discovery | `terminal length 0` |  | CLI |
| Initial device discovery | `show version` |  | CLI |
| L2 Interfaces | `show interface` |  | CLI |
| Neighbors | `show lldp neighbors detail` |  | CLI |
| Neighbors | `show lldp neighbors` |  | CLI |
| Neighbors | `show lldp neighbor` |  | CLI |
| MAC | `show mac-address-table` |  | CLI |
| MAC | `show mac address-table` |  | CLI |
| L3 Interfaces | `show vrrp` |  | CLI |
| L3 Interfaces | `show management interface` |  | CLI |
| L3 Interfaces | `show ip vrf` |  | CLI |
| L3 Interfaces | `show ip interface` |  | CLI |
| L2 Interfaces | `show running-config` |  | CLI |
| L2 Interfaces | `show management interface` |  | CLI |
| L2 Interfaces | `show interface switchport` |  | CLI |
| L2 Interfaces | `show interfaces` |  | CLI |
| Disable pagination | `terminal length 0` |  | CLI |
| FHRP | `show vrrp` |  | CLI |
| Power supplies & fans | `show version` |  | CLI |
| Power supplies & fans | `show running-config` |  | CLI |
| Power supplies & fans | `show fan` |  | CLI |
| Power supplies & fans | `show power` |  | CLI |
| Startup config | `show configuration` |  | CLI |
| Startup config | `show startup-config` |  | CLI |
| Current config | `show running-config` |  | CLI |
| Configuration saved | `show configuration` |  | CLI |
| Configuration saved | `show startup-config` |  | CLI |
| Configuration saved | `show running-config` |  | CLI |
| Device info | `show tcp connect` |  | CLI |
| Device info | `show memory` |  | CLI |

---

## Supported Tasks

| Category | Task | Status | IPv6 | Notes | Transport |
|----------|------|--------|------|-------|-----------|
| Basic discovery | ARP | ✓ | — |  | CLI |
| Basic discovery | Device info | ✓ | — |  | CLI |
| Basic discovery | Disable pagination | ✓ | — |  | CLI |
| Basic discovery | FHRP | ✓ | ✗ |  | CLI |
| Basic discovery | Initial device discovery | ✓ | — |  | CLI |
| Basic discovery | IPv6 Neighbor Discovery | ✗ | ✗ |  | — |
| Basic discovery | L2 Interfaces | ✓ | — |  | CLI |
| Basic discovery | L3 Interfaces | ✓ | ✗ |  | CLI |
| Basic discovery | Link aggregations | ✓ | — |  | CLI |
| Basic discovery | MAC | ✓ | — |  | CLI |
| Basic discovery | Neighbors | ✓ | ✗ |  | CLI |
| Basic discovery | Routing table | ✓ | ✗ |  | CLI |
| Basic discovery | Serial ports | ○ | — |  | — |
| Basic discovery | SN | ✓ | — |  | CLI |
| Basic discovery | STP | ✓ | — |  | CLI |
| Basic discovery | Virtual Contexts | ○ | — |  | — |
| Basic discovery | Vlan | ✓ | — |  | CLI |
| Configuration | Configuration saved | ✓ | — |  | CLI |
| Configuration | Current config | ✓ | — |  | CLI |
| Configuration | Startup config | ✓ | — |  | CLI |
| Hardware | Cluster | ○ | — |  | — |
| Hardware | End of Life data | ✗ | — |  | — |
| Hardware | Extenders | ○ | — |  | — |
| Hardware | PoE | ✗ | — |  | — |
| Hardware | Power supplies & fans | ✓ | — |  | CLI |
| Hardware | Stacking | ✗ | — |  | — |
| Hardware | Transceivers | ✓ | — |  | CLI |
| Hardware | VSS | ○ | — |  | — |
| Hybrid discovery | snCheck | ○ | — |  | — |
| Management | DHCPv4 Relays | ✗ | ✗ |  | — |
| Management | DHCPv4 Servers | ✗ | ✗ |  | — |
| Management | DNS resolver | ✗ | ✗ |  | — |
| Management | IP Flow | ✗ | ✗ |  | — |
| Management | License | ✗ | — |  | — |
| Management | NTP | ✓ | ✗ |  | CLI |
| Management | Port mirroring | ✓ | — |  | CLI |
| Management | PTP | ✗ | ✗ |  | — |
| Management | SNMP | ✓ | ✗ |  | CLI |
| Management | Syslog | ✓ | ✗ |  | CLI |
| Management | Unidirectional Link Detection | ✗ | — |  | — |
| MPLS | Circuit cross-connect | ○ | — |  | — |
| MPLS | MPLS forwarding | ✗ | — |  | — |
| MPLS | MPLS LDP | ✗ | — |  | — |
| MPLS | RSVP | ✗ | — |  | — |
| MPLS | VPLS | ✗ | — |  | — |
| MPLS | VPWS | ○ | — |  | — |
| Multicast | IGMP | ✗ | — |  | — |
| Multicast | IGMP Snooping | ✗ | — |  | — |
| Multicast | MAC multicast address table | ○ | — |  | — |
| Multicast | MROUTE | ✗ | — |  | — |
| Multicast | PIM | ✗ | — |  | — |
| Other | Cloud network interfaces | ○ | ○ |  | — |
| Other | PPPoE | ✗ | ✗ |  | — |
| Policy | NAT44 | ✗ | — |  | — |
| QoS | QoS | ✗ | — |  | — |
| Routing | BGP Advertised Routes | ✗ | ✗ |  | — |
| Routing | Fabric Path | ○ | — |  | — |
| Routing | Policy-based Routing | ✗ | ✗ |  | — |
| Routing | Route summary | ✓ | ✗ |  | CLI |
| Routing | Routing policies | ✗ | — |  | — |
| Routing | VRF | ✓ | — |  | CLI |
| Routing protocols | BGP neighbors | ✓ | ✓ |  | CLI |
| Routing protocols | EIGRP | ✗ | ✗ |  | — |
| Routing protocols | IS-IS | ✗ | ✗ |  | — |
| Routing protocols | Lisp | ○ | ○ |  | — |
| Routing protocols | OSPF | ✓ | — |  | CLI |
| Routing protocols | OSPFv3 | ✗ | ✗ |  | — |
| Routing protocols | RIP | ✗ | — |  | — |
| SDN | APIC | ○ | ○ |  | — |
| SDN | Cisco ACI | ○ | ○ |  | — |
| SDN | Virtual machines | ○ | — |  | — |
| SDN | VXLAN | ✗ | — |  | — |
| SDWAN | SD-WAN sites | ✗ | — |  | — |
| Security | AAA | ✓ | ✗ |  | CLI |
| Security | ACL | ✓ | ✓ |  | CLI |
| Security | DHCPv4 Snooping | ✗ | ✗ |  | — |
| Security | DMVPN | ○ | ○ |  | — |
| Security | Error disabled interfaces | ✗ | — |  | — |
| Security | IPsec | ✗ | ✗ |  | — |
| Security | LSVPN | ○ | ○ |  | — |
| Security | Prefix lists | ✗ | ✗ |  | — |
| Security | Secured access ports | ✗ | — |  | — |
| Security | Storm control | ✓ | — | thresholds come from running-config - `show storm-control` does not expose the per-port pps/Kbps mode, which the unit is derived from. No percentage unit and no aggregate (all) type on this platform; unicast supports no action, and action/auto_resume exist only on ports in pps mode | CLI |
| Security | STP port security | ✓ | — |  | CLI |
| Security | Virtual servers | ○ | ○ |  | — |
| Security | Zone firewall | ✗ | ✗ |  | — |
| Wireless | Wireless AP | ✗ | — |  | — |
| Wireless | Wireless clients | ✗ | — |  | — |
| Wireless | Wireless Controller with APs | ✗ | — |  | — |

---

## All Families from fs

- **fs@fsos** *(current)*

---

## Legend

- **✓** = Fully Integrated
- **✗** = Not Yet Integrated
- **○** = Not Available
- **🆕** = New in this version
- **CLI** = SSH or Telnet session, **API** = vendor or controller API; in the Transport column, **✗** after one = not yet integrated over it, **—** = not integrated over any transport. A family reached over both may use the API together with CLI or instead of it.

*Generated: 2026-11-22T13:54:37.188Z*
