Family: hpe 3com (v7.8.0)
==================================================
Vendor: hpe
Family: 3com
New: No

CLI Commands:
--------------------------------------------------
  Routing table: display ip interface
  L3 Interfaces: display ip interface
  L3 Interfaces: display vrrp verbose
  MAC: display mac-address
  Neighbors: display ndp
  Neighbors: display lldp neighbor-information
  Link aggregations: display interface
  Link aggregations: display link-aggregation verbose
  Routing table: display ip routing-table verbose
  L2 Interfaces: display link-aggregation verbose
  Routing table: display vrrp verbose
  SN: display device manuinfo
  STP: display stp
  STP: display vlan all
  STP: display interface
  STP: display stp region-configuration
  STP: display voice vlan status
  Initial device discovery: display version
  L2 Interfaces: display voice vlan status
  L2 Interfaces: display interface
  FHRP: display vrrp verbose
  DNS resolver: display current-configuration
  DHCPv4 Relays: display current-configuration
  Startup config: display saved-configuration
  Current config: display current-configuration
  Configuration saved: display current-configuration
  Configuration saved: display saved-configuration
  Device info: display memory
  Device info: display tcp status
  Device info: display device manuinfo
  Device info: display version
  ARP: display arp
  Initial device discovery: undo terminal monitor

Task Support:
--------------------------------------------------

  Basic discovery:
    ✓ ARP
    ✓ Device info
    ○ Disable pagination
    ✓ FHRP (IPv6: ✗)
    ✓ Initial device discovery
    ✗ IPv6 Neighbor Discovery (IPv6: ✗)
    ✓ L2 Interfaces
    ✓ L3 Interfaces (IPv6: ✗)
    ✓ Link aggregations
    ✓ MAC
    ✓ Neighbors (IPv6: ✗)
    ✓ Routing table (IPv6: ✗)
    ○ Serial ports
    ✓ SN
    ✓ STP
    ○ Virtual Contexts
    ✗ Vlan

  Configuration:
    ✓ Configuration saved
    ✓ Current config
    ✓ Startup config

  Hardware:
    ○ Cluster
    ✓ End of Life data
    ○ Extenders
    ✗ PoE
    ✗ Power supplies & fans
    ✗ Stacking
    ✗ Transceivers
    ○ VSS

  Hybrid discovery:
    ○ snCheck

  Management:
    ✓ DHCPv4 Relays (IPv6: ✗)
    ✗ DHCPv4 Servers (IPv6: ✗)
    ✓ DNS resolver (IPv6: ✓)
    ✗ IP Flow (IPv6: ✗)
    ○ License
    ✗ NTP (IPv6: ✗)
    ✗ Port mirroring
    ✗ PTP (IPv6: ✗)
    ✗ SNMP (IPv6: ✗)
    ✗ Syslog (IPv6: ✗)
    ✗ Unidirectional Link Detection

  MPLS:
    ○ Circuit cross-connect
    ○ MPLS forwarding
    ○ MPLS LDP
    ✗ RSVP
    ○ VPLS
    ○ VPWS

  Multicast:
    ✗ IGMP
    ✗ IGMP Snooping
    ✗ MAC multicast address table
    ✗ MROUTE
    ✗ PIM

  Other:
    ○ Cloud network interfaces (IPv6: ○)
    ✗ PPPoE (IPv6: ✗)

  Policy:
    ✗ NAT44

  QoS:
    ✗ QoS

  Routing:
    ○ BGP Advertised Routes (IPv6: ○)
    ○ Fabric Path
    ✗ Policy-based Routing (IPv6: ✗)
    ✗ Route summary (IPv6: ✗)
    ○ Routing policies
    ✗ VRF

  Routing protocols:
    ✗ BGP neighbors (IPv6: ✗)
    ○ EIGRP (IPv6: ○)
    ✗ IS-IS (IPv6: ✗)
    ○ Lisp (IPv6: ○)
    ✗ OSPF
    ✗ OSPFv3 (IPv6: ✗)
    ✗ RIP

  SDN:
    ○ APIC (IPv6: ○)
    ○ Cisco ACI (IPv6: ○)
    ○ Virtual machines
    ○ VXLAN

  SDWAN:
    ○ SD-WAN sites

  Security:
    ✗ AAA (IPv6: ✗)
    ✗ ACL (IPv6: ✗)
    ✗ DHCPv4 Snooping (IPv6: ✗)
    ○ DMVPN (IPv6: ○)
    ✗ Error disabled interfaces
    ○ IPsec (IPv6: ○)
    ○ LSVPN (IPv6: ○)
    ○ Prefix lists (IPv6: ○)
    ✗ Secured access ports
    ✗ Storm control
    ✗ STP port security
    ○ Virtual servers (IPv6: ○)
    ○ Zone firewall (IPv6: ○)

  Wireless:
    ○ Wireless AP
    ○ Wireless clients
    ○ Wireless Controller with APs

All Families from hpe:
--------------------------------------------------
  hpe@comware
  hpe@aruba
  hpe@arubasw
  hpe@arubacx
  hpe@3com <-- current
  hpe@aruba-iap

Legend: ✓=Full, ✗=Not Yet, ○=N/A