Family: huawei vrp (v7.5.0)
==================================================
Vendor: huawei
Family: vrp
New: No

CLI Commands:
--------------------------------------------------
  Routing table: display ip routing-table statistics
  SN: display device manufacture-info
  SN: display esn
  Routing table: display vrrp
  Routing table: display ip vpn-instance <name> interface
  Routing table: display ip vpn-instance
  Routing table: display ip interface
  Routing table: display mpls lsp verbose
  Routing table: display ip routing-table vpn-instance <name> protocol <name> verbose
  Routing table: display ip routing-table vpn-instance <name> verbose
  Routing table: display ip routing-table vpn-instance <name> statistics
  Routing table: display ip routing-table protocol <name> verbose
  Routing table: display ip routing-table verbose
  SN: display bridge mac-address
  Route summary: display ip routing-table vpn-instance <instanceName> statistics
  Route summary: display ip routing-table statistics
  Port mirroring: display observe-port
  Port mirroring: display port-mirroring configuration
  Port mirroring: display port-mirroring
  Link aggregations: display interface
  Link aggregations: display eth-trunk
  OSPF: display ospf peer
  OSPF: display ospf interface all
  NTP: display ntp sessions
  Neighbors: display lldp neighbor
  MPLS forwarding: display mpls lsp verbose
  STP: display stp vlan bpdu statistics
  VXLAN: display interfaces
  VXLAN: display vxlan tunnel
  VXLAN: display vxlan vni
  VRF: display ip vpn-instance verbose
  Vlan: display current-configuration
  Vlan: display vlan
  Transceivers: display optical-module extend information interface <intName> ['display interface transceiver verbose' is now used as backup cmd; display optical-module cmd used e.g. by NE routers]
  Transceivers: display interface ['display interface transceiver verbose' is now used as backup cmd; display optical-module cmd used e.g. by NE routers]
  Transceivers: display interface transceiver verbose ['display interface transceiver verbose' is now used as backup cmd; display optical-module cmd used e.g. by NE routers]
  Transceivers: display transceiver verbose ['display interface transceiver verbose' is now used as backup cmd; display optical-module cmd used e.g. by NE routers]
  Syslog: display info-center
  STP: display vbst bpdu-statistics
  MPLS LDP: display mpls ldp interface verbose
  STP: display stp vlan information
  STP: display stp region-configuration
  STP: display stp vlan <vlanId>
  STP: display stp
  STP: display vlan
  STP: display port vlan
  STP: display port vlan active
  STP: display interface
  SNMP: display snmp-agent community write
  SNMP: display snmp-agent community read
  SNMP: display current-configuration
  Device info: display lldp local | include Chassis [
      * display telnet server - used for VRP version 8
      * display telnet server status - used for VRP version 5
      ]
  DHCPv4 Snooping: display dhcp snooping statistics
  DHCPv4 Snooping: display dhcp snooping global
  DHCPv4 Snooping: display dhcp snooping
  DHCPv4 Relays: display vrrp
  DHCPv4 Relays: display ip vpn-instance <name> interface
  DHCPv4 Relays: display ip vpn-instance
  DHCPv4 Relays: display ip interface
  DHCPv4 Relays: display current configuration
  Startup config: display saved-configuration
  Current config: display current-configuration
  Configuration saved: display current-configuration
  Configuration saved: display saved-configuration
  DHCPv4 Snooping: display dhcp snooping user-bind all
  Device info: display memory [
      * display telnet server - used for VRP version 8
      * display telnet server status - used for VRP version 5
      ]
  Device info: display  telnet server status [
      * display telnet server - used for VRP version 8
      * display telnet server status - used for VRP version 5
      ]
  Device info: display telnet server [
      * display telnet server - used for VRP version 8
      * display telnet server status - used for VRP version 5
      ]
  Device info: display device manufacture-info [
      * display telnet server - used for VRP version 8
      * display telnet server status - used for VRP version 5
      ]
  Device info: display device [
      * display telnet server - used for VRP version 8
      * display telnet server status - used for VRP version 5
      ]
  Device info: display version [
      * display telnet server - used for VRP version 8
      * display telnet server status - used for VRP version 5
      ]
  BGP neighbors: display bgp <addressFamily> <vpnInstance> peer verbose
  BGP neighbors: display bgp <addressFamiily> <vpnInstance> peer
  ARP: display arp all
  ARP: display arp
  Initial device discovery: screen-length 0 temporary
  Initial device discovery: display version
  L2 Interfaces: display interface
  MPLS LDP: display mpls ldp adjacency verbose
  MPLS LDP: display mpls ldp peer verbose
  MAC: display vxlan vni
  MAC: display interface
  MAC: display mac-address
  L3 Interfaces: display vrrp
  L3 Interfaces: display ip vpn-instance <name> interface
  L3 Interfaces: display ip vpn-instance
  L3 Interfaces: display ip interface
  L2 Interfaces: display vlan
  L2 Interfaces: display port vlan
  L2 Interfaces: display port vlan active
  Disable pagination: screen-length 0 temporary
  IS-IS: display isis peer verbose [vpn-instance <vpnInstance>]
  IS-IS: display isis interface verbose [vpn-instance <vpnInstance>]
  IS-IS: display ip vpn-instance
  IP Flow: display sflow configuration
  IP Flow: display sflow
  IP Flow: display ip netstream all
  FHRP: display vrrp protocol-information
  FHRP: display vrrp verbose
  FHRP: display vrrp
  DNS resolver: show current-configuration
  DHCPv4 Snooping: display clock

Task Support:
--------------------------------------------------

  Basic discovery:
    ✓ ARP
    ✓ Device info
    ✓ Disable pagination
    ✓ FHRP (IPv6: ✗)
    ✓ Initial device discovery
    ✗ IPv6 Neighbor Discovery (IPv6: ✗)
    ✓ L2 Interfaces
    ✓ L3 Interfaces (IPv6: ✗)
    ✓ Link aggregations
    ✓ MAC
    ✓ Neighbors (IPv6: ✗)
    ✓ Routing table (IPv6: ✗)
    ○ Serial ports
    ✓ SN
    ✓ STP
    ○ Virtual Contexts
    ✓ Vlan

  Configuration:
    ✓ Configuration saved
    ✓ Current config
    ✓ Startup config

  Hardware:
    ○ Cluster
    ✗ End of Life data
    ✗ Extenders
    ✗ PoE
    ✗ Power supplies & fans
    ✗ Stacking
    ✓ Transceivers
    ○ VSS

  Hybrid discovery:
    ○ snCheck

  Management:
    ✓ DHCPv4 Relays (IPv6: ✗)
    ✗ DHCPv4 Servers (IPv6: ✗)
    ✓ DNS resolver (IPv6: ✗)
    ✓ IP Flow (IPv6: ✗)
    ○ License
    ✓ NTP (IPv6: ✗)
    ✓ Port mirroring
    ○ PTP (IPv6: ○)
    ✓ SNMP (IPv6: ✗)
    ✓ Syslog (IPv6: ✗)
    ✗ Unidirectional Link Detection

  MPLS:
    ○ Circuit cross-connect
    ✓ MPLS forwarding
    ✓ MPLS LDP
    ✗ RSVP
    ✗ VPLS
    ✗ VPWS

  Multicast:
    ✗ IGMP
    ✗ IGMP Snooping
    ✗ MAC multicast address table
    ✗ MROUTE
    ✗ PIM

  Other:
    ○ Cloud network interfaces (IPv6: ○)
    ✗ PPPoE (IPv6: ✗)

  Policy:
    ✗ NAT44

  QoS:
    ✗ QoS

  Routing:
    ✗ BGP Advertised Routes (IPv6: ✗)
    ○ Fabric Path
    ✗ Policy-based Routing (IPv6: ✗)
    ✓ Route summary
    ○ Routing policies
    ✓ VRF

  Routing protocols:
    ✓ BGP neighbors (IPv6: ✗)
    ○ EIGRP (IPv6: ○)
    ✓ IS-IS (IPv6: ✗)
    ○ Lisp (IPv6: ○)
    ✓ OSPF
    ✗ OSPFv3 (IPv6: ✗)
    ✗ RIP

  SDN:
    ○ APIC (IPv6: ○)
    ○ Cisco ACI (IPv6: ○)
    ○ Virtual machines
    ✓ VXLAN

  SDWAN:
    ✗ SD-WAN sites

  Security:
    ✗ AAA (IPv6: ✗)
    ○ ACL (IPv6: ○)
    ✓ DHCPv4 Snooping (IPv6: ✗)
    ✗ DMVPN (IPv6: ✗)
    ✗ Error disabled interfaces
    ✗ IPsec (IPv6: ✗)
    ○ LSVPN (IPv6: ○)
    ○ Prefix lists (IPv6: ○)
    ✗ Secured access ports
    ✗ Storm control
    ✗ STP port security
    ○ Virtual servers (IPv6: ○)
    ○ Zone firewall (IPv6: ○)

  Wireless:
    ✗ Wireless AP
    ✗ Wireless clients
    ✗ Wireless Controller with APs

All Families from huawei:
--------------------------------------------------
  huawei@vrp <-- current

Legend: ✓=Full, ✗=Not Yet, ○=N/A