Family: juniper junos (v6.8.0)
==================================================
Vendor: juniper
Family: junos
New: No

CLI Commands:
--------------------------------------------------
  OSPFv3: show configuration | display set
  Neighbors: show lldp neighbors
  Neighbors: show lldp neighbors interface <intName>
  NTP: show ntp associations no-resolve
  NTP: show system connections
  OSPF: show ospf interface detail instance <instanceName>
  OSPF: show ospf neighbor detail instance all
  OSPF: show ospf overview
  OSPFv3: show ospf3 interface detail instance <instanceName>
  OSPFv3: show ospf3 neighbor detail instance all
  OSPFv3: show ospf3 overview instance <instanceName>
  OSPFv3: show route instance detail
  NAT44: show configuration groups junos-defaults applications | display set
  PoE: show poe interface
  PoE: show poe controller
  Link aggregations: show interfaces statistics detail
  Link aggregations: show lacp interfaces
  Port mirroring: show analyzer
  Port mirroring: show forwarding-options analyzer
  RIP: show rip interfaces instance all
  RIP: show rip statistics instance all
  Route summary: show route summary
  Route summary: show route instance detail
  Route summary: show bgp neighbor <instanceName>
  PIM: show pim rps
  IGMP Snooping: show vlans detail
  MROUTE: show multicast route extensive
  MROUTE: show multicast rpf <prefix>
  MROUTE: show pim rps
  MROUTE: show route instance detail
  PIM: show pim interface
  PIM: show pim neighbors
  PIM: show pim neighbors detail
  PIM: show interfaces statistics detail
  PIM: show route instance detail
  PIM: show vrrp detail
  Route summary: show route table <instanceName>.inet.0 protocol isis active-path detail | match level
  PIM: show pim bootstrap
  MPLS LDP: show interfaces statistics detail
  MPLS LDP: show ldp interface extensive instance <vrf>
  MPLS LDP: show ldp neighbor extensive instance <vrf>
  MPLS LDP: show configuration | display set
  MPLS forwarding: show route active-path
  MPLS forwarding: show route active-path table mpls.0
  MPLS forwarding: show route active-path table mpls.0 protocol <protocol>
  MPLS forwarding: show rsvp session up detail
  NAT44: show configuration security | display inheritance
  NAT44: show configuration applications | display inheritance
  Transceivers: show interfaces terse
  STP: show spanning-tree bridge detail
  STP: show spanning-tree interface detail
  STP: show spanning-tree mstp configuration
  STP: show spanning-tree statistics interface
  STP: show configuration
  STP port security: show spanning-tree interface detail [only EX and QFX switches use even show ethernet-switching interfaces]
  STP port security: show ethernet-switching interfaces [only EX and QFX switches use even show ethernet-switching interfaces]
  STP port security: show configuration | display set | except "^deactivate" [only EX and QFX switches use even show ethernet-switching interfaces]
  Syslog: show configuration | display set | except "^deactivate"
  Transceivers: show chassis hardware
  Transceivers: show interfaces diagnostics optics
  STP: show vlans detail
  Vlan: show vlans detail
  VRF: show route instance detail
  VRF: show configuration | display set | except "^deactivate"
  VXLAN: show ethernet-switching vxlan-tunnel-end-point source
  VXLAN: show ethernet-switching vxlan-tunnel-end-point remote
  VXLAN: show interfaces statistics detail
  VXLAN: show vlans detail
  Zone firewall: show configuration security | display inheritance
  Zone firewall: show configuration applications | display inheritance
  Zone firewall: show configuration groups junos-defaults applications | display set
  Zone firewall: show interfaces statistics detail
  RSVP: show rsvp interface extensive
  Route summary: show ospf neighbor detail instance all
  Route summary: show ospf route network detail instance <instanceName>
  Route summary: show configuration | display set
  Routing table: show route active-path
  Routing table: show route active-path table inet.0
  Routing table: show route active-path table inet.0 protocol <protocol>
  Routing table: show rsvp session up detail
  RSVP: show rsvp interface extensive instance <name>
  RSVP: show rsvp neighbor detail instance <name>
  RSVP: show interfaces statistics detail
  RSVP: show route instance detail
  IGMP Snooping: show igmp snooping membership detail
  RSVP: show rsvp neighbor detail
  RSVP: show configuration | display set
  Secured access ports: show dot1x interface detail
  Secured access ports: show interfaces terse
  SN: show chassis hardware
  SNMP: show configuration | display set | except "^deactivate"
  SNMP: show interfaces statistics detail
  Stacking: show virtual-chassis
  Stacking: show virtual-chassis device-topology
  Stacking: show virtual-chassis vc-port all-member
  DHCPv4 Servers: show system uptime
  DHCPv4 Servers: show configuration | display set
  DHCPv4 Servers: show dhcp server binding detail
  DHCPv4 Servers: show dhcp server binding routing-instance <routing-instance> detail
  DHCPv4 Servers: show interfaces statistics detail
  DHCPv4 Servers: show route instance detail
  DHCPv4 Servers: show vrrp detail
  DHCPv4 Servers: show vlans detail
  DHCPv4 Servers: show system services dhcp pool <poolName> detail
  DHCPv4 Servers: show system services dhcp pool
  DHCPv4 Servers: show system services dhcp binding
  DHCPv4 Servers: show system services dhcp client
  DHCPv4 Relays: show dhcp relay statistics routing-instance <routing-instance>
  DHCPv4 Snooping: show dhcp snooping binding [commands "show dhcp snooping binding" and "show dhcp-security binding" provide equal output, always only one of them is supported]
  DHCPv4 Snooping: show dhcp-security binding [commands "show dhcp snooping binding" and "show dhcp-security binding" provide equal output, always only one of them is supported]
  DHCPv4 Snooping: show vlans detail [commands "show dhcp snooping binding" and "show dhcp-security binding" provide equal output, always only one of them is supported]
  DHCPv4 Snooping: show configuration | display set | except "^deactivate" [commands "show dhcp snooping binding" and "show dhcp-security binding" provide equal output, always only one of them is supported]
  DNS resolver: show configuration | display set
  Power supplies & fans: show chassis hardware
  Power supplies & fans: show version
  Power supplies & fans: show chassis environment
  Error disabled interfaces: show ethernet-switching interface [EX and QFX switches use even show ethernet-switching interface, others use just show spanning-tree interface detail]
  Error disabled interfaces: show ethernet-switching interfaces [EX and QFX switches use even show ethernet-switching interface, others use just show spanning-tree interface detail]
  Error disabled interfaces: show spanning-tree interface detail [EX and QFX switches use even show ethernet-switching interface, others use just show spanning-tree interface detail]
  BGP: show configuration | display set
  Initial device discovery: set cli screen-length 0
  Initial device discovery: show version
  Initial device discovery: set cli screen-width 0
  AAA: show configuration | display set | except "^deactivate"
  ACL: show configuration firewall | display inheritance
  ACL: show configuration policy-options | display inheritance
  ACL: show configuration interfaces | display inheritance
  ARP: show arp no-resolve
  BGP: show route instance detail
  BGP: show bgp neighbor instance <instanceName>
  BGP: show bgp summary <instanceName>
  Error disabled interfaces: show interfaces statistics detail [EX and QFX switches use even show ethernet-switching interface, others use just show spanning-tree interface detail]
  Cluster: show chassis cluster status
  Cluster: show chassis cluster interfaces
  Device info: show version
  Device info: show chassis hardware
  Device info: show system uptime
  Device info: show system connections
  Device info: show chassis routing-engine
  Device info: show configuration | display set
  Current config: show configuration
  DHCPv4 Relays: show configuration | display set
  DHCPv4 Relays: show dhcp relay statistics
  L3 Interfaces: show vrrp detail
  L2 Interfaces: show dot1x interface detail
  L2 Interfaces: show configuration | display set
  Circuit cross-connect: show connections extensive
  Circuit cross-connect: show mpls ldp
  VPLS: show vpls connections extensive
  VPLS: show route instance detail
  VPWS: show l2circuit connections extensive
  VPWS: show l2vpn connections extensive
  VPWS: show route instance detail
  L3 Interfaces: show interfaces statistics detail
  L3 Interfaces: show route instance detail
  L2 Interfaces: show analyzer
  L3 Interfaces: show vlans detail
  L3 Interfaces: show security ipsec security-associations detail
  MAC: show ethernet-switching table
  MAC: show vlans detail
  MAC: show ethernet-switching vxlan-tunnel-end-point source
  MAC: show ethernet-switching vxlan-tunnel-end-point esi
  IGMP: show igmp interface
  IGMP: show igmp group
  IGMP: show interfaces statistics detail
  IGMP: show route instance detail
  IGMP: show vrrp detail
  IPsec: show configuration | display set | except "^deactivate"
  FHRP: show vrrp detail
  IP Flow: show configuration firewall | display omit
  IP Flow: show configuration forwarding-options sampling
  IP Flow: show configuration interfaces | match sampling | except filter | display set
  IP Flow: show configuration policy-options | display set
  IP Flow: show interfaces statistics detail
  IP Flow: show sflow collector
  IP Flow: show sflow interface
  IP Flow: show sflow
  IPsec: show security ike security-associations detail
  IPsec: show security ipsec security-associations detail
  Disable pagination: set cli screen-length 0
  IS-IS: show isis interface extensive instance <instanceName>
  IS-IS: show isis overview instance <instanceName>
  IS-IS: show isis adjacency extensive instance <instanceName>
  IS-IS: show interfaces statistics detail
  IS-IS: show version
  IS-IS: show chassis cluster status
  IS-IS: show configuration | display set
  L2 Interfaces: show interfaces statistics detail
  L2 Interfaces: show interfaces terse
  L2 Interfaces: show vlans detail

Task Support:
--------------------------------------------------

  Basic discovery:
    ✓ ARP
    ✓ Device info
    ✓ Disable pagination
    ✓ FHRP
    ✓ Initial device discovery
    ✗ IPv6 Neighbor Discovery
    ✓ L2 Interfaces
    ✓ L3 Interfaces
    ✓ Link aggregations
    ✓ MAC
    ✓ Neighbors
    ✓ Routing table
    ○ Serial ports
    ✓ SN
    ✓ STP
    ○ Virtual Contexts
    ✓ Vlan

  Configuration:
    ○ Configuration saved
    ✓ Current config
    ○ Startup config

  Hardware:
    ✓ Cluster
    ✓ End of Life data
    ○ Extenders
    ✓ PoE
    ✓ Power supplies & fans
    ✓ Stacking
    ✓ Transceivers
    ○ VSS

  Hybrid discovery:
    ○ snCheck

  Management:
    ✓ DHCPv4 Relays
    ✓ DHCPv4 Servers
    ✓ DNS resolver
    ✓ IP Flow
    ○ License
    ✓ NTP
    ✓ Port mirroring
    ✗ PTP
    ✓ SNMP
    ✓ Syslog
    ✗ Unidirectional Link Detection

  MPLS:
    ✓ Circuit cross-connect
    ✓ MPLS forwarding
    ✓ MPLS LDP
    ✓ RSVP
    ✓ VPLS
    ✓ VPWS

  Multicast:
    ✓ IGMP
    ✓ IGMP Snooping
    ✗ MAC multicast address table
    ✓ MROUTE
    ✓ PIM

  Other:
    ✗ PPPoE

  Policy:
    ✓ NAT44

  QoS:
    ✗ QoS

  Routing:
    ○ Fabric Path
    ✗ Policy-based Routing
    ✓ Route summary
    ○ Routing policies
    ✓ VRF

  Routing protocols:
    ✓ BGP
    ○ EIGRP
    ✓ IS-IS
    ○ Lisp
    ✓ OSPF
    ✓ OSPFv3
    ✓ RIP

  SDN:
    ○ APIC
    ○ Cisco ACI
    ○ Virtual machines
    ✓ VXLAN

  SDWAN:
    ✗ SD-WAN sites

  Security:
    ✓ AAA
    ✓ ACL
    ✓ DHCPv4 Snooping
    ○ DMVPN
    ✓ Error disabled interfaces
    ✓ IPsec
    ○ Prefix lists
    ✓ Secured access ports
    ✗ Storm control
    ✓ STP port security
    ○ Virtual servers
    ✓ Zone firewall

  Wireless:
    ○ Wireless AP
    ○ Wireless APs
    ○ Wireless clients

All Families from juniper:
--------------------------------------------------
  juniper@junos <-- current
  juniper@mist

Legend: ✓=Full, ✗=Not Yet, ○=N/A