Family: cisco wlc-air (v6.3.0)
==================================================
Vendor: cisco
Family: wlc-air
New: No

CLI Commands:
--------------------------------------------------
  Syslog: show run-config commands
  Wireless clients: show ap summary
  Wireless clients: show client detail <clientMac>
  Wireless clients: show client summary
  Wireless clients: show client detail
  Transceivers: show redundancy summary [just a very best effort mapping - "debug fastpath cfgtool --dump.sfp" would provide better info]
  Transceivers: show system interfaces [just a very best effort mapping - "debug fastpath cfgtool --dump.sfp" would provide better info]
  Transceivers: show interface detail <intName> [just a very best effort mapping - "debug fastpath cfgtool --dump.sfp" would provide better info]
  Transceivers: show interface summary [just a very best effort mapping - "debug fastpath cfgtool --dump.sfp" would provide better info]
  Transceivers: show stats port summary [just a very best effort mapping - "debug fastpath cfgtool --dump.sfp" would provide better info]
  Transceivers: show port detailed-info [just a very best effort mapping - "debug fastpath cfgtool --dump.sfp" would provide better info]
  Transceivers: show port summary [just a very best effort mapping - "debug fastpath cfgtool --dump.sfp" would provide better info]
  Wireless clients: show redundancy summary
  SNMP: show sysinfo
  SNMP: show snmpversion
  SNMP: show snmpv3user
  SNMP: show snmptrap
  SNMP: show snmpcommunity
  SN: show inventory
  Routing table: show redundancy summary
  Routing table: show system interfaces
  Routing table: show interface detailed <name>
  Routing table: show interface summary
  Routing table: show lag summary
  Wireless APs: show wlan <wlanId> [older & deprecated commands show ap config 802.11a/b summary are only used if newer show advanced 802.11a/b summary fail]
  Wireless APs: show redundancy summary [older & deprecated commands show ap config 802.11a/b summary are only used if newer show advanced 802.11a/b summary fail]
  Wireless APs: show system interfaces [older & deprecated commands show ap config 802.11a/b summary are only used if newer show advanced 802.11a/b summary fail]
  Wireless APs: show interface detailed <name> [older & deprecated commands show ap config 802.11a/b summary are only used if newer show advanced 802.11a/b summary fail]
  Wireless APs: show interface summary [older & deprecated commands show ap config 802.11a/b summary are only used if newer show advanced 802.11a/b summary fail]
  Wireless APs: show lag summary [older & deprecated commands show ap config 802.11a/b summary are only used if newer show advanced 802.11a/b summary fail]
  Wireless APs: show ap stats ethernet summary [older & deprecated commands show ap config 802.11a/b summary are only used if newer show advanced 802.11a/b summary fail]
  Wireless APs: show stats port summary <portId> [older & deprecated commands show ap config 802.11a/b summary are only used if newer show advanced 802.11a/b summary fail]
  Wireless APs: show port detailed-info [older & deprecated commands show ap config 802.11a/b summary are only used if newer show advanced 802.11a/b summary fail]
  Wireless APs: show port summary [older & deprecated commands show ap config 802.11a/b summary are only used if newer show advanced 802.11a/b summary fail]
  Wireless APs: show ap config 802.11b summary [older & deprecated commands show ap config 802.11a/b summary are only used if newer show advanced 802.11a/b summary fail]
  Wireless APs: show ap config 802.11a summary [older & deprecated commands show ap config 802.11a/b summary are only used if newer show advanced 802.11a/b summary fail]
  Routing table: show stats port summary <portId>
  Wireless APs: show wlan summary [older & deprecated commands show ap config 802.11a/b summary are only used if newer show advanced 802.11a/b summary fail]
  Wireless APs: show ap wlan 802.11b <apName> [older & deprecated commands show ap config 802.11a/b summary are only used if newer show advanced 802.11a/b summary fail]
  Wireless APs: show ap wlan 802.11a <apName> [older & deprecated commands show ap config 802.11a/b summary are only used if newer show advanced 802.11a/b summary fail]
  Wireless APs: show advanced 802.11b summary [older & deprecated commands show ap config 802.11a/b summary are only used if newer show advanced 802.11a/b summary fail]
  Wireless APs: show advanced 802.11a summary [older & deprecated commands show ap config 802.11a/b summary are only used if newer show advanced 802.11a/b summary fail]
  Wireless APs: show ap inventory <apName> [older & deprecated commands show ap config 802.11a/b summary are only used if newer show advanced 802.11a/b summary fail]
  Wireless APs: show ap cdp neighbors all [older & deprecated commands show ap config 802.11a/b summary are only used if newer show advanced 802.11a/b summary fail]
  Wireless APs: show ap stats ethernet <apName> [older & deprecated commands show ap config 802.11a/b summary are only used if newer show advanced 802.11a/b summary fail]
  Wireless APs: show ap config general <apName> [older & deprecated commands show ap config 802.11a/b summary are only used if newer show advanced 802.11a/b summary fail]
  Wireless APs: show ap summary [older & deprecated commands show ap config 802.11a/b summary are only used if newer show advanced 802.11a/b summary fail]
  Startup config: show run-config commands
  L2 Interfaces: show lag summary
  L2 Interfaces: show stats port summary <portId>
  L2 Interfaces: show port detailed-info
  L2 Interfaces: show port summary
  IP Flow: show flow monitor summary
  DHCPv4 Servers: show dhcp leases
  DHCPv4 Servers: show run-config commands
  DHCPv4 Relays: show dhcp stats
  DHCPv4 Relays: show dhcp proxy
  DHCPv4 Relays: show interface detailed <name>
  DHCPv4 Relays: show run-config commands
  L2 Interfaces: show interface summary
  Current config: show run-config commands
  Device info: show memory statistics
  Device info: show redundancy summary
  Device info: show network summary
  Device info: show inventory
  Device info: show sysinfo
  AAA: show run-config commands
  Initial device discovery: show inventory
  Initial device discovery: show version
  Initial device discovery: config paging disabled
  L3 Interfaces: show redundancy summary
  Routing table: show port detailed-info
  Routing table: show port summary
  Link aggregations: show redundancy summary
  Link aggregations: show system interfaces
  Link aggregations: show interface detail <intName>
  Link aggregations: show interface summary
  Link aggregations: show lag summary
  Link aggregations: show port summary
  NTP: show time
  Neighbors: show cdp neighbors detail
  License: show license all
  Disable pagination: config paging disabled
  L3 Interfaces: show system interfaces
  L3 Interfaces: show interface detailed <name>
  L3 Interfaces: show interface summary
  L3 Interfaces: show lag summary
  L3 Interfaces: show stats port summary <portId>
  L3 Interfaces: show port detailed-info
  L3 Interfaces: show port summary
  L2 Interfaces: show redundancy summary
  L2 Interfaces: show system interfaces
  L2 Interfaces: show interface detailed <name>

Task Support:
--------------------------------------------------

  Basic discovery:
    ○ ARP
    ✓ Device info
    ✓ Disable pagination
    ○ FHRP
    ✓ Initial device discovery
    ✗ IPv6 Neighbor Discovery
    ✓ L2 Interfaces
    ✓ L3 Interfaces
    ✓ Link aggregations
    ○ MAC
    ✓ Neighbors
    ✓ Routing table
    ○ Serial ports
    ✓ SN
    ○ STP
    ○ Virtual Contexts
    ✗ Vlan

  Configuration:
    ○ Configuration saved
    ✓ Current config
    ✓ Startup config

  Hardware:
    ○ Cluster
    ✓ End of Life data
    ○ Extenders
    ○ PoE
    ✗ Power supplies & fans
    ○ Stacking
    ✓ Transceivers
    ○ VSS

  Management:
    ✓ DHCPv4 Relays
    ✓ DHCPv4 Servers
    ○ DNS resolver
    ✓ IP Flow
    ✓ License
    ✓ NTP
    ✗ Port mirroring
    ○ PTP
    ✓ SNMP
    ✓ Syslog
    ○ Unidirectional Link Detection

  MPLS:
    ○ Circuit cross-connect
    ○ MPLS forwarding
    ○ MPLS LDP
    ○ RSVP
    ○ VPLS
    ○ VPWS

  Multicast:
    ✗ IGMP
    ○ IGMP Snooping
    ○ MAC multicast address table
    ✗ MROUTE
    ✗ PIM

  Other:
    ✗ PPPoE

  Policy:
    ✗ NAT44

  QoS:
    ✗ QoS

  Routing:
    ○ Fabric Path
    ✗ Policy-based Routing
    ✗ Route summary
    ✗ Routing policies
    ○ VRF

  Routing protocols:
    ○ BGP
    ○ EIGRP
    ○ IS-IS
    ○ Lisp
    ✗ OSPF
    ✗ OSPFv3
    ○ RIP

  SDN:
    ○ APIC
    ○ Cisco ACI
    ○ Virtual machines
    ○ VXLAN

  SDWAN:
    ○ SD-WAN sites

  Security:
    ✓ AAA
    ✗ ACL
    ○ DHCPv4 Snooping
    ○ DMVPN
    ○ Error disabled interfaces
    ○ IPsec
    ✗ NAT
    ✗ Prefix lists
    ○ Secured access ports
    ○ Storm control
    ✗ STP port security
    ○ Virtual servers
    ○ Zone firewall

  Wireless:
    ○ Wireless AP
    ✓ Wireless APs
    ✓ Wireless clients

All Families from cisco:
--------------------------------------------------
  cisco@ios
  cisco@ios-xe
  cisco@nx-os
  cisco@ios-xr
  cisco@asa
  cisco@wlc-air <-- current
  cisco@sg
  cisco@ftd
  cisco@aci
  cisco@meraki
  cisco@viptela
  cisco@apic

Legend: ✓=Full, ✗=Not Yet, ○=N/A