Family: hp comware (v4.4.3)
==================================================
Vendor: hp
Family: comware
New: No

CLI Commands:
--------------------------------------------------
  PoE: display poe interfaces
  Secured access ports: display dot1x
  Secured access ports: display port-security
  Routing table: display ip interface
  Routing table: display ip routing-table vpn-instance <name> verbose
  Routing table: display ip vpn-instance
  Routing table: display ip routing-table verbose
  Route summary: display ip routing-table statistics
  RIP: display rip <processId> interfaces
  RIP: display rip <processId> neighbors
  RIP: display rip
  Port mirroring: display mirroring-group all
  Link aggregations: display link-aggregation verbose
  Link aggregations: display interface
  Secured access ports: display mac-authentication
  OSPF: display ospf interface verbose
  OSPF: display ospf peer verbose
  NTP: display ntp-service sessions
  Neighbors: display lldp neighbor-information verbose [display lldp neighbor-information verbose not supported by comware5]
  Neighbors: display lldp neighbor-information [display lldp neighbor-information verbose not supported by comware5]
  MAC: display mac-address
  L3 Interfaces: display vrrp verbose
  L3 Interfaces: display ip interface
  L3 Interfaces: display ip vpn-instance instance-name <name>
  L2 Interfaces: display voice vlan state
  L2 Interfaces: display voice-vlan state
  L2 Interfaces: display interface
  L2 Interfaces: display clock
  STP: display ip interface
  Wireless APs: display wlan ap all verbose
  Wireless APs: display ip interface
  Wireless clients: display wlan client verbose
  Wireless clients: display wlan ap all verbose
  Wireless clients: display wlan client stats
  VRF: display ip vpn-instance instance <instanceName>
  VRF: display ip vpn-instance
  Vlan: display vlan all
  Transceivers: display transceiver manuinfo interface
  Transceivers: display transceiver diagnosis interface
  Transceivers: display transceiver interface
  Syslog: display info-center
  STP: display link-aggregation verbose
  IS-IS: display ip vpn instance <vpnInstance>
  STP: display interface
  STP: display vlan all
  STP: display stp region-configuration
  STP: display stp
  Storm control: display storm-constrain
  Stacking: display wlan ap all verbose [display wlan... is used just to detect WLC for which the task is not done/finished]
  Stacking: display irf topology [display wlan... is used just to detect WLC for which the task is not done/finished]
  Stacking: display irf [display wlan... is used just to detect WLC for which the task is not done/finished]
  Stacking: display device manuinfo [display wlan... is used just to detect WLC for which the task is not done/finished]
  SNMP: display current-configuration
  SN: display license device-id
  SN: display device manuinfo
  ARP: display ip vpn-instance
  Device info: display tcp [
      * display tcp - supported by Comware version 7
      * display tcp status - supported by Comware version 5
      * display wlan ap all verbose - we need to determine WLC as devType
      ]
  Device info: display device manuinfo [
      * display tcp - supported by Comware version 7
      * display tcp status - supported by Comware version 5
      * display wlan ap all verbose - we need to determine WLC as devType
      ]
  Device info: display version [
      * display tcp - supported by Comware version 7
      * display tcp status - supported by Comware version 5
      * display wlan ap all verbose - we need to determine WLC as devType
      ]
  BGP: display ip vpn-instance
  BGP: display bgp peer vpn-instance <instanceName> verbose
  BGP: display bgp peer vpn-instance <instanceName>
  BGP: display bgp peer verbose
  BGP: display bgp peer
  BGP: display bgp peer ipv4 vpn-instance <instanceName> verbose
  BGP: display bgp peer ipv4 vpn-instance <instanceName>
  BGP: display bgp peer ipv4 verbose
  BGP: display bgp peer ipv4
  ARP: display arp vpn-instance <instanceName>
  Device info: display wlan ap all verbose [
      * display tcp - supported by Comware version 7
      * display tcp status - supported by Comware version 5
      * display wlan ap all verbose - we need to determine WLC as devType
      ]
  ARP: display ip interface
  ARP: display arp
  ACL: display object-group
  ACL: display packet-filter interface
  ACL: display packet-filter all
  ACL: display acl all
  AAA: display password-control
  AAA: display current-configuration
  Initial device discovery: _cmdline-mode on
  Initial device discovery: summary
  Initial device discovery: display version
  Initial device discovery: screen-length disable
  Power supplies & fans: display power
  IS-IS: display ip interface
  IS-IS: display isis name-table <processId>
  IS-IS: display isis peer verose <processId>
  IS-IS: display isis brief <processId>
  IS-IS: display isis <processId>
  IS-IS: display current-configuration configuration isis
  IP Flow: display sflow
  IP Flow: display ip netstream export
  FHRP: display vrrp verbose
  Error disabled interfaces: display vrrp verbose
  Power supplies & fans: display irf
  Power supplies & fans: display fan
  Power supplies & fans: display device manuinfo
  Disable pagination: screen-length disable
  DHCPv4 Snooping: display dhcp snooping binding
  DHCPv4 Snooping: display dhcp snooping packet statistics
  DHCPv4 Snooping: display dhcp-snooping packet statistics
  DHCPv4 Snooping: display dhcp snooping trust
  DHCPv4 Snooping: display dhcp-snooping trust
  DHCPv4 Snooping: display dhcp-snooping
  Startup config: display saved-configuration
  Current config: display current-configuration
  Configuration saved: display current-configuration
  Configuration saved: display saved-configuration
  Device info: display lldp local-information global [
      * display tcp - supported by Comware version 7
      * display tcp status - supported by Comware version 5
      * display wlan ap all verbose - we need to determine WLC as devType
      ]
  Device info: display memory [
      * display tcp - supported by Comware version 7
      * display tcp status - supported by Comware version 5
      * display wlan ap all verbose - we need to determine WLC as devType
      ]

Task Support:
--------------------------------------------------

  Basic discovery:
    ✓ ARP
    ✓ Device info
    ✓ Disable pagination
    ✓ FHRP
    ✓ Initial device discovery
    ✓ L2 Interfaces
    ✓ L3 Interfaces
    ✓ Link aggregations
    ✓ MAC
    ✓ Neighbors
    ✓ Routing table
    ✓ SN
    ✓ STP
    ○ Virtual Contexts
    ✓ Vlan

  Configuration:
    ✓ Configuration saved
    ✓ Current config
    ✓ Startup config

  Hardware:
    ○ Cluster
    ○ Extenders
    ✓ PoE
    ✓ Power supplies & fans
    ✓ Stacking
    ✓ Transceivers
    ○ VSS

  Management:
    ✓ IP Flow
    ○ License
    ✓ NTP
    ✓ Port mirroring
    ✗ PTP
    ✓ SNMP
    ✓ Syslog
    ✗ Unidirectional Link Detection

  MPLS:
    ○ Circuit cross-connect
    ✗ MPLS forwarding
    ✗ MPLS LDP
    ✗ VPLS
    ✗ VPWS

  Multicast:
    ✗ IGMP
    ✗ IGMP Snooping
    ○ MAC multicast address table
    ✗ MROUTE
    ✗ PIM

  Other:
    ✗ PPPoE

  QoS:
    ✗ QoS

  Routing:
    ✓ Route summary
    ✓ VRF

  Routing protocols:
    ✓ BGP
    ○ EIGRP
    ✓ IS-IS
    ✓ OSPF
    ✗ OSPFv3
    ✓ RIP

  SDN:
    ○ Cisco ACI
    ○ Virtual machines
    ✗ VXLAN

  SDWAN:
    ○ SD-WAN sites

  Security:
    ✓ AAA
    ✓ ACL
    ✓ DHCPv4 Snooping
    ○ DMVPN
    ✗ Error disabled interfaces
    ✗ IPsec
    ○ NAT
    ✓ Secured access ports
    ✓ Storm control
    ✗ STP port security
    ○ Virtual servers
    ○ Zone firewall

  Wireless:
    ○ Wireless AP
    ✓ Wireless APs
    ✓ Wireless clients

All Families from hp:
--------------------------------------------------
  hp@comware <-- current
  hp@aruba
  hp@arubasw
  hp@arubacx
  hp@3com

Legend: ✓=Full, ✗=Not Yet, ○=N/A