Family: cisco sg (v4.4.1)
==================================================
Vendor: cisco
Family: sg
New: No

CLI Commands:
--------------------------------------------------
  Secured access ports: show dot1x
  L2 Interfaces: show interface counters
  L2 Interfaces: show interface description
  L2 Interfaces: show interface switchport <int>
  L3 Interfaces: show ip interface
  MAC: show mac address-table
  Neighbors: show lldp neighbors
  Neighbors: show lldp neighbors <int>
  Neighbors: show cdp neighbors detail
  Unidirectional Link Detection: show udld
  PoE: show power inline
  Link aggregations: show interfaces port-channel
  Port mirroring: show ports monitor
  Routing table: show ip route
  Secured access ports: show interface status
  L2 Interfaces: show interface status
  Secured access ports: show dot1x users
  SN: show inventory
  SNMP: show running-config
  SNMP: show snmp users
  STP: show spanning-tree detail
  STP: show interface status
  STP: show interface switchport <int>
  STP: show vlan
  STP: show interfaces port-channel
  STP port security: show spanning-tree detail
  STP port security: show spanning-tree bpdu
  Syslog: show running-config
  Vlan: show vlan
  Device info: show line telnet
  Initial device discovery: terminal datadump
  Initial device discovery: show version
  Initial device discovery: show inventory
  Initial device discovery: enable
  Initial device discovery: show privileges
  AAA: show running-config
  AAA: show passwords configuration
  ACL: show interfaces access-lists
  ACL: show access-list
  ARP: show arp
  Device info: show version [nx9000 runs show inventory all to get transceivers]
  Device info: show inventory [nx9000 runs show inventory all to get transceivers]
  Device info: show system
  Disable pagination: terminal datadump
  Device info: show cdp
  Device info: show lldp local <intName>
  Device info: show spanning-tree detail
  Configuration saved: show startup-config
  Configuration saved: show running-config
  Current config: show running-config
  Startup config: show startup-config
  DHCPv4 Snooping: show ip dhcp snooping
  DHCPv4 Snooping: show ip dhcp snooping binding
  Power supplies & fans: show system
  Power supplies & fans: show inventory
  Error disabled interfaces: show errdisable interfaces
  IP Flow: show sflow configuration

Task Support:
--------------------------------------------------

  Basic discovery:
    ✓ ARP
    ✓ Device info
    ✓ Disable pagination
    ✗ FHRP
    ✓ Initial device discovery
    ✓ L2 Interfaces
    ✓ L3 Interfaces
    ✓ Link aggregations
    ✓ MAC
    ✓ Neighbors
    ✓ Routing table
    ✓ SN
    ✓ STP
    ○ Virtual Contexts
    ✓ Vlan

  Configuration:
    ✓ Configuration saved
    ✓ Current config
    ✓ Startup config

  Hardware:
    ○ Cluster
    ○ Extenders
    ✓ PoE
    ✓ Power supplies & fans
    ✗ Stacking
    ✗ Transceivers
    ○ VSS

  Management:
    ✓ IP Flow
    ○ License
    ○ NTP
    ✓ Port mirroring
    ○ PTP
    ✓ SNMP
    ✓ Syslog
    ✓ Unidirectional Link Detection

  MPLS:
    ○ Circuit cross-connect
    ○ MPLS forwarding
    ○ MPLS LDP
    ○ VPLS
    ○ VPWS

  Multicast:
    ○ IGMP
    ✗ IGMP Snooping
    ✗ MAC multicast address table
    ○ MROUTE
    ○ PIM

  Other:
    ✗ PPPoE

  QoS:
    ✗ QoS

  Routing:
    ✗ Route summary
    ○ VRF

  Routing protocols:
    ✗ BGP
    ✗ EIGRP
    ○ IS-IS
    ✗ OSPF
    ✗ OSPFv3
    ✗ RIP

  SDN:
    ○ Cisco ACI
    ○ Virtual machines
    ○ VXLAN

  SDWAN:
    ○ SD-WAN sites

  Security:
    ✓ AAA
    ✓ ACL
    ✓ DHCPv4 Snooping
    ○ DMVPN
    ✓ Error disabled interfaces
    ○ IPsec
    ○ NAT
    ✓ Secured access ports
    ✗ Storm control
    ✓ STP port security
    ○ Virtual servers
    ○ Zone firewall

  Wireless:
    ○ Wireless AP
    ○ Wireless APs
    ○ Wireless clients

All Families from cisco:
--------------------------------------------------
  cisco@ios
  cisco@ios-xe
  cisco@nx-os
  cisco@ios-xr
  cisco@asa
  cisco@wlc-air
  cisco@sg <-- current
  cisco@ftd
  cisco@aci
  cisco@meraki
  cisco@viptela

Legend: ✓=Full, ✗=Not Yet, ○=N/A