Family: huawei vrp (v4.3.4)
==================================================
Vendor: huawei
Family: vrp
New: No

CLI Commands:
--------------------------------------------------
  Routing table: display ip routing-table protocol <name> verbose
  SNMP: display current-configuration
  SN: display device manufacture-info [display ip interface - for lab environment (non-production)]
  SN: display esn [display ip interface - for lab environment (non-production)]
  Routing table: display vrrp
  Routing table: display ip vpn-instance <name> interface
  Routing table: display ip vpn-instance
  Routing table: display ip interface
  Routing table: display mpls lsp verbose
  Routing table: display ip routing-table vpn-instance <name> protocol <name> verbose
  Routing table: display ip routing-table vpn-instance <name> verbose
  Routing table: display ip routing-table vpn-instance <name> statistics
  SNMP: display snmp-agent community read
  Routing table: display ip routing-table verbose
  Routing table: display ip routing-table statistics
  Route summary: display ip routing-table vpn-instance <instanceName> statistics
  Route summary: display ip routing-table statistics
  Port mirroring: display observe-port
  Port mirroring: display port-mirroring configuration
  Port mirroring: display port-mirroring
  Port-channels: display interface
  Port-channels: display eth-trunk
  OSPF: display ospf peer
  STP: display vbst bpdu-statistics
  VXLAN: display interfaces
  VXLAN: display vxlan tunnel
  VXLAN: display vxlan vni
  Vrf: display ip vpn-instance verbose
  Vlan: display current-configuration
  Vlan: display vlan
  Transceivers: display optical-module extend information interface <intName> ['display interface transceiver verbose' is now used as backup cmd; display optical-module cmd used e.g. by NE routers]
  Transceivers: display interface ['display interface transceiver verbose' is now used as backup cmd; display optical-module cmd used e.g. by NE routers]
  Transceivers: display interface transceiver verbose ['display interface transceiver verbose' is now used as backup cmd; display optical-module cmd used e.g. by NE routers]
  Transceivers: display transceiver verbose ['display interface transceiver verbose' is now used as backup cmd; display optical-module cmd used e.g. by NE routers]
  Syslog: display info-center
  OSPF: display ospf interface all
  STP: display stp vlan bpdu statistics
  STP: display stp vlan information
  STP: display stp region-configuration
  STP: display stp vlan <vlanId>
  STP: display stp
  STP: display vlan
  STP: display port vlan
  STP: display port vlan active
  STP: display interface
  SNMP: display snmp-agent community write
  Device info: display  telnet server status [
      * display telnet server - used for VRP version 8
      * display telnet server status - used for VRP version 5
      ]
  FHRP: display vrrp protocol-information
  FHRP: display vrrp verbose
  FHRP: display vrrp
  DHCPv4 Snooping: display clock
  DHCPv4 Snooping: display dhcp snooping user-bind all
  DHCPv4 Snooping: display dhcp snooping statistics
  DHCPv4 Snooping: display dhcp snooping global
  DHCPv4 Snooping: display dhcp snooping
  Config Current: display current-configuration
  Device info: display lldp local | include Chassis [
      * display telnet server - used for VRP version 8
      * display telnet server status - used for VRP version 5
      ]
  Device info: display memory [
      * display telnet server - used for VRP version 8
      * display telnet server status - used for VRP version 5
      ]
  IP Flow: display ip netstream all
  Device info: display telnet server [
      * display telnet server - used for VRP version 8
      * display telnet server status - used for VRP version 5
      ]
  Device info: display device manufacture-info [
      * display telnet server - used for VRP version 8
      * display telnet server status - used for VRP version 5
      ]
  Device info: display device [
      * display telnet server - used for VRP version 8
      * display telnet server status - used for VRP version 5
      ]
  Device info: display version [
      * display telnet server - used for VRP version 8
      * display telnet server status - used for VRP version 5
      ]
  BGP: display bgp <addressFamiily> <vpnInstance> peer verbose
  BGP: display bgp <addressFamiily> <vpnInstance> peer
  ARP: display arp all
  ARP: display arp
  Init: screen-length 0 temporary
  Init: display version
  L3 Interfaces: display ip vpn-instance
  NTP: display ntp sessions
  Neighbor discovery protocols: display lldp neighbor
  MPLS forwarding: display mpls lsp verbose
  MPLS - LDP: display mpls ldp interface verbose
  MPLS - LDP: display mpls ldp adjacency verbose
  MPLS - LDP: display mpls ldp peer verbose
  MAC: display vxlan vni
  MAC: display interface
  MAC: display mac-address
  L3 Interfaces: display vrrp
  L3 Interfaces: display ip vpn-instance <name> interface
  Disable pagination: screen-length 0 temporary
  L3 Interfaces: display ip interface
  L2 Interfaces: display vlan
  L2 Interfaces: display port vlan
  L2 Interfaces: display port vlan active
  L2 Interfaces: display interface
  IS-IS: display isis peer verbose [vpn-instance <vpnInstance>]
  IS-IS: display isis interface verbose [vpn-instance <vpnInstance>]
  IS-IS: display ip vpn-instance
  IP Flow: display sflow configuration
  IP Flow: display sflow

Task Support:
--------------------------------------------------

  Basic discovery:
    ✗ _helpers/vlanIntList
    ✓ ARP
    ✓ Device info
    ✓ Disable pagination
    ✓ FHRP
    ✓ Init
    ✓ L2 Interfaces
    ✓ L3 Interfaces
    ✓ MAC
    ✓ Neighbor discovery protocols
    ✓ Port-channels
    ✓ Routing table
    ✓ SN
    ✓ STP
    ○ Virtual Contexts
    ✓ Vlan

  Configuration:
    ✓ Config Current
    ✗ Configuration saved
    ✗ Startup config

  Hardware:
    ✗ Chassis extenders
    ○ Cluster
    ✗ Environment - Power & Fan
    ✗ POE
    ✗ Stacking
    ✓ Transceivers
    ○ VSS

  Management:
    ✓ IP Flow
    ✓ NTP
    ✗ OAM - unidirectLinkDetection
    ✓ Port mirroring
    ○ ptp
    ✓ SNMP
    ✓ Syslog

  MPLS:
    ○ Circuit cross-connect
    ✓ MPLS - LDP
    ✓ MPLS forwarding
    ✗ VPLS
    ✗ VPWS

  Multicast:
    ✗ MAC multicast address table
    ✗ MCAST - IGMP
    ✗ MCAST - IGMP Snooping
    ✗ MCAST - MROUTE
    ✗ MCAST - PIM

  Other:
    ✗ pppoe

  QoS:
    ✗ Router QoS

  Routing:
    ✓ Route summary
    ✓ Vrf

  Routing protocols:
    ✓ BGP
    ○ EIGRP
    ✓ IS-IS
    ✓ OSPF
    ✗ OSPFv3
    ✗ RIP

  SDN:
    ○ ACI
    ○ virtualMachines
    ✓ VXLAN

  SDWAN:
    ✗ sites

  Security:
    ✗ AAA
    ○ ACL
    ✓ DHCPv4 Snooping
    ✗ DMVPN
    ✗ Error disabled interfaces
    ✗ IPsec
    ○ NAT
    ✗ Secured access ports
    ✗ Storm control
    ✗ STP port security
    ○ virtualServer
    ○ Zone firewall

  Wireless:
    ✗ Wireless - AP
    ✗ Wireless - AP List
    ✗ Wireless - Client List
    ✗ Wireless - Lan List

All Families from huawei:
--------------------------------------------------
  huawei@vrp <-- current

Legend: ✓=Full, ✗=Not Yet, ○=N/A