Family: hp arubacx (v3.8.0)
==================================================
Vendor: hp
Family: arubacx
New: No

CLI Commands:
--------------------------------------------------
  Routing table: show ip route summary all-vrfs
  NTP: show ntp associations
  OSPF: show ip ospf interface
  OSPF: show ip ospf interface all-vrfs
  OSPF: show ip ospf neighbors detail
  OSPF: show ip ospf neighbors detail all-vrfs
  Port-channels: show interface lag
  Port-channels: show interface
  Port-channels: show vsx brief
  Port-channels: show vsx status
  Port-channels: show lacp interfaces multi-chassis
  Route summary: show ip route summary all-vrfs
  Route summary: show ip route summary
  Routing table: show ip route
  Routing table: show ip route all-vrfs
  Neighbor discovery protocols: show cdp neighbor info <int>
  Routing table: show ip route summary
  Routing table: show ip route <protocolName> all-vrfs
  Routing table: show ip route <protocolName>
  Routing table: show interface mgmt
  SN: show system
  Stacking: show vsf detail
  Stacking: show vsf link
  STP: show spanning-tree detail
  STP: show spanning-tree mst detail
  STP: show spanning-tree summary root
  STP: show vlan
  Transceivers: show interface transceiver detail
  Vlan: show vlan
  Config Current: show running-config
  Init: no page
  Init: show system
  ARP: show arp all-vrfs
  ARP: show arp
  BGP: show bgp all-vrf all neighbors
  BGP: show bpg all neighbors
  Device info: top memory
  Device info: show system
  Device info: show module
  Device info: show lldp local-device
  Device info: show images
  Configuration saved: show startup-config
  Configuration saved: show running-config
  Disable pagination: no page
  Startup config: show startup-config
  FHRP: show vrrp
  FHRP: show interface
  L2 Interfaces: show interface
  L2 Interfaces: show interface mgmt
  L3 Interfaces: show ip interface brief
  L3 Interfaces: show ip interface brief all-vrfs
  L3 Interfaces: show interface mgmt
  L3 Interfaces: show vrrp
  MAC: show mac-address-table
  Neighbor discovery protocols: show lldp neighbor info
  Neighbor discovery protocols: show lldp neighbor info <int>
  Neighbor discovery protocols: show cdp neighbor info

Task Support:
--------------------------------------------------

  config:
    ✓ Configuration saved
    ✓ Startup config

  discovery:
    ✓ ARP
    ✓ Config Current
    ✓ Device info
    ✓ Disable pagination
    ✓ Init
    ✓ L2 Interfaces
    ✓ L3 Interfaces
    ✓ MAC
    ✓ Neighbor discovery protocols
    ✓ Routing table
    ✓ SN
    ✓ STP
    ✗ Virtual Contexts

  hardware:
    ✗ Chassis extenders
    ✗ Cluster
    ✗ Environment - Power & Fan
    ✗ POE
    ✓ Stacking
    ✓ Transceivers
    ✗ VSS

  l2:
    ✗ _helpers/vlanIntList
    ○ ACI
    ✗ DHCPv4 Snooping
    ✗ Error disabled interfaces
    ✗ MAC multicast address table
    ✗ MCAST - IGMP Snooping
    ✓ Port-channels
    ✗ pppoe
    ✗ Storm control
    ✗ STP port security
    ✓ Vlan
    ✗ VXLAN

  l3:
    ✓ BGP
    ○ Circuit cross-connect
    ○ EIGRP
    ✓ FHRP
    ✗ IS-IS
    ✗ MCAST - IGMP
    ✗ MCAST - MROUTE
    ✗ MCAST - PIM
    ✓ OSPF
    ✗ OSPFv3
    ○ RIP
    ✓ Route summary
    ○ VPLS
    ○ VPWS
    ✗ Vrf

  management:
    ✗ IP Flow
    ✓ NTP
    ✗ Port mirroring
    ✗ ptp
    ✗ SNMP
    ✗ Syslog

  mpls:
    ✗ MPLS - LDP
    ✗ MPLS forwarding

  oam:
    ✗ OAM - unidirectLinkDetection

  qos:
    ✗ QOS

  sd-wan:
    ○ sites

  security:
    ✗ AAA
    ○ ACL
    ✗ DMVPN
    ✗ IPsec
    ✗ NAT
    ✗ Object groups
    ✗ Secured access ports
    ✗ Zone firewall

  wireless:
    ○ Wireless - AP
    ✗ Wireless - AP List
    ✗ Wireless - Client List
    ✗ Wireless - Lan List

All Families from hp:
--------------------------------------------------
  hp@comware
  hp@aruba
  hp@arubasw
  hp@arubacx <-- current

Legend: ✓=Full, ✗=Not Yet, ○=N/A