Family: cisco sg (v3.7.5)
==================================================
Vendor: cisco
Family: sg
New: No

CLI Commands:
--------------------------------------------------
  Secured access ports: show interface status
  L2 Interfaces: show interface status
  L2 Interfaces: show interface counters
  L2 Interfaces: show interface description
  L2 Interfaces: show interface switchport <int>
  L3 Interfaces: show ip interface
  MAC: show mac address-table
  Neighbor discovery protocols: show lldp neighbors
  Neighbor discovery protocols: show lldp neighbors <int>
  Neighbor discovery protocols: show cdp neighbors detail
  OAM - unidirectLinkDetection: show udld
  POE: show power inline
  Port-channels: show interfaces port-channel
  Port mirroring: show ports monitor
  Routing table: show ip route
  IP Flow: show sflow configuration
  Secured access ports: show dot1x
  Secured access ports: show dot1x users
  SN: show inventory
  SNMP: show running-config
  SNMP: show snmp users
  STP: show spanning-tree detail
  STP: show interface status
  STP: show interface switchport <int>
  STP: show vlan
  STP: show interfaces port-channel
  STP port security: show spanning-tree detail
  STP port security: show spanning-tree bpdu
  Syslog: show running-config
  Vlan: show vlan
  Device info: show inventory [nx9000 runs show inventory all to get transceivers]
  _helpers/vlanIntList: show interface switchport <int>
  _helpers/vlanIntList: show vlan
  _helpers/vlanIntList: show interfaces port-channel
  Disable pagination: terminal datadump
  Init: terminal datadump
  Init: show version
  Init: show inventory
  Init: enable
  Init: show privileges
  AAA: show running-config
  ACL: show interfaces access-lists
  ACL: show access-list
  ARP: show arp
  Device info: show version [nx9000 runs show inventory all to get transceivers]
  _helpers/vlanIntList: show interface status
  Device info: show system
  Device info: show line telnet
  Device info: show cdp
  Device info: show lldp local <intName>
  Device info: show spanning-tree detail
  Configuration saved: show startup-config
  Configuration saved: show running-config
  Config Current: show running-config
  Startup config: show startup-config
  DHCPv4 Snooping: show ip dhcp snooping
  DHCPv4 Snooping: show ip dhcp snooping binding
  Environment - Power & Fan: show system
  Environment - Power & Fan: show inventory
  Error disabled interfaces: show errdisable interfaces

Task Support:
--------------------------------------------------

  config:
    ✓ Configuration saved
    ✓ Startup config

  discovery:
    ✓ ARP
    ✓ Config Current
    ✓ Device info
    ✓ Disable pagination
    ✓ Init
    ✓ L2 Interfaces
    ✓ L3 Interfaces
    ✓ MAC
    ✓ Neighbor discovery protocols
    ✓ Routing table
    ✓ SN
    ✓ STP
    ○ Virtual Contexts

  hardware:
    ○ Chassis extenders
    ○ Cluster
    ✓ Environment - Power & Fan
    ✓ POE
    ✗ Stacking
    ✗ Transceivers
    ○ VSS

  l2:
    ✓ _helpers/vlanIntList
    ○ ACI
    ✓ DHCPv4 Snooping
    ✓ Error disabled interfaces
    ✗ MAC multicast address table
    ✗ MCAST - IGMP Snooping
    ✓ Port-channels
    ✗ Storm control
    ✓ STP port security
    ✓ Vlan
    ○ VXLAN

  l3:
    ✗ BGP
    ○ Circuit cross-connect
    ✗ EIGRP
    ✗ FHRP
    ○ IS-IS
    ○ MCAST - IGMP
    ○ MCAST - MROUTE
    ○ MCAST - PIM
    ✗ OSPF
    ✗ OSPFv3
    ✗ RIP
    ✗ Route summary
    ○ VPLS
    ○ VPWS
    ○ Vrf

  management:
    ✓ IP Flow
    ○ NTP
    ✓ Port mirroring
    ✓ SNMP
    ✓ Syslog

  mpls:
    ○ MPLS - LDP
    ○ MPLS forwarding

  oam:
    ✓ OAM - unidirectLinkDetection

  qos:
    ✗ QOS

  security:
    ✓ AAA
    ✓ ACL
    ○ DMVPN
    ○ IPsec
    ○ NAT
    ✗ Object groups
    ✓ Secured access ports
    ○ Zone firewall

  wireless:
    ○ Wireless - AP
    ○ Wireless - AP List
    ○ Wireless - Client List
    ○ Wireless - Lan List

All Families from cisco:
--------------------------------------------------
  cisco@ios
  cisco@ios-xe
  cisco@nx-os
  cisco@ios-xr
  cisco@asa
  cisco@wlc-air
  cisco@sg <-- current
  cisco@ftd
  cisco@aci
  cisco@meraki

Legend: ✓=Full, ✗=Not Yet, ○=N/A