# Family: cisco wlc-air — v3.7.3

**Version:** 3.7.3
**Vendor:** cisco
**Family:** wlc-air
**New in this version:** No
**URL:** https://feature-matrix-imenovsky01a.user.ipf.cx/3.7.3/family/88545873

---

## CLI Commands

| Task | Command | Notes |
|------|---------|-------|
| Wireless - Client List | `show client detail` |  |
| Wireless - Lan List | `show wlan summary` |  |
| Wireless - Lan List | `show system interfaces` |  |
| Wireless - Lan List | `show interface detailed <name>` |  |
| Wireless - Lan List | `show interface summary` |  |
| Wireless - Lan List | `show lag summary` |  |
| Wireless - Lan List | `show stats port summary <portId>` |  |
| Wireless - Lan List | `show port detailed-info` |  |
| Wireless - Lan List | `show port summary` |  |
| Wireless - Client List | `show redundancy summary` |  |
| Wireless - Client List | `show ap summary` |  |
| Wireless - Client List | `show client detail <clientMac>` |  |
| Wireless - Client List | `show client summary` |  |
| Wireless - Lan List | `show wlan <id>` |  |
| Transceivers | `show redundancy summary` | just a very best effort mapping - "debug fastpath cfgtool --dump.sfp" would provide better info |
| Transceivers | `show system interfaces` | just a very best effort mapping - "debug fastpath cfgtool --dump.sfp" would provide better info |
| Transceivers | `show interface detail <int>` | just a very best effort mapping - "debug fastpath cfgtool --dump.sfp" would provide better info |
| Transceivers | `show interface summary` | just a very best effort mapping - "debug fastpath cfgtool --dump.sfp" would provide better info |
| Transceivers | `show stats port summary` | just a very best effort mapping - "debug fastpath cfgtool --dump.sfp" would provide better info |
| Transceivers | `show port detailed-info` | just a very best effort mapping - "debug fastpath cfgtool --dump.sfp" would provide better info |
| Transceivers | `show port summary` | just a very best effort mapping - "debug fastpath cfgtool --dump.sfp" would provide better info |
| Syslog | `show run-config commands` |  |
| SNMP | `show sysinfo` |  |
| SNMP | `show snmpversion` |  |
| SNMP | `show snmpv3user` |  |
| Wireless - AP List | `show wlan <wlanId>` | older & deprecated commands show ap config 802.11a/b summary are only used if newer show advanced 802.11a/b summary fail |
| Wireless - AP List | `show redundancy summary` | older & deprecated commands show ap config 802.11a/b summary are only used if newer show advanced 802.11a/b summary fail |
| Wireless - AP List | `show system interfaces` | older & deprecated commands show ap config 802.11a/b summary are only used if newer show advanced 802.11a/b summary fail |
| Wireless - AP List | `show interface detailed <name>` | older & deprecated commands show ap config 802.11a/b summary are only used if newer show advanced 802.11a/b summary fail |
| Wireless - AP List | `show interface summary` | older & deprecated commands show ap config 802.11a/b summary are only used if newer show advanced 802.11a/b summary fail |
| Wireless - AP List | `show lag summary` | older & deprecated commands show ap config 802.11a/b summary are only used if newer show advanced 802.11a/b summary fail |
| Wireless - AP List | `show ap stats ethernet summary` | older & deprecated commands show ap config 802.11a/b summary are only used if newer show advanced 802.11a/b summary fail |
| Wireless - AP List | `show stats port summary <portId>` | older & deprecated commands show ap config 802.11a/b summary are only used if newer show advanced 802.11a/b summary fail |
| Wireless - AP List | `show port detailed-info` | older & deprecated commands show ap config 802.11a/b summary are only used if newer show advanced 802.11a/b summary fail |
| Wireless - AP List | `show port summary` | older & deprecated commands show ap config 802.11a/b summary are only used if newer show advanced 802.11a/b summary fail |
| Wireless - AP List | `show ap config 802.11b summary` | older & deprecated commands show ap config 802.11a/b summary are only used if newer show advanced 802.11a/b summary fail |
| Wireless - AP List | `show ap config 802.11a summary` | older & deprecated commands show ap config 802.11a/b summary are only used if newer show advanced 802.11a/b summary fail |
| SNMP | `show snmptrap` |  |
| Wireless - AP List | `show wlan summary` | older & deprecated commands show ap config 802.11a/b summary are only used if newer show advanced 802.11a/b summary fail |
| Wireless - AP List | `show ap wlan 802.11b <apName>` | older & deprecated commands show ap config 802.11a/b summary are only used if newer show advanced 802.11a/b summary fail |
| Wireless - AP List | `show ap wlan 802.11a <apName>` | older & deprecated commands show ap config 802.11a/b summary are only used if newer show advanced 802.11a/b summary fail |
| Wireless - AP List | `show advanced 802.11b summary` | older & deprecated commands show ap config 802.11a/b summary are only used if newer show advanced 802.11a/b summary fail |
| Wireless - AP List | `show advanced 802.11a summary` | older & deprecated commands show ap config 802.11a/b summary are only used if newer show advanced 802.11a/b summary fail |
| Wireless - AP List | `show ap inventory <apName>` | older & deprecated commands show ap config 802.11a/b summary are only used if newer show advanced 802.11a/b summary fail |
| Wireless - AP List | `show ap cdp neighbors all` | older & deprecated commands show ap config 802.11a/b summary are only used if newer show advanced 802.11a/b summary fail |
| Wireless - AP List | `show ap stats ethernet <apName>` | older & deprecated commands show ap config 802.11a/b summary are only used if newer show advanced 802.11a/b summary fail |
| Wireless - AP List | `show ap config general <apName>` | older & deprecated commands show ap config 802.11a/b summary are only used if newer show advanced 802.11a/b summary fail |
| Wireless - AP List | `show ap summary` | older & deprecated commands show ap config 802.11a/b summary are only used if newer show advanced 802.11a/b summary fail |
| Wireless - Lan List | `show redundancy summary` |  |
| Startup config | `show run-config commands` |  |
| L3 Interfaces | `show port detailed-info` |  |
| L3 Interfaces | `show port summary` |  |
| L2 Interfaces | `show redundancy summary` |  |
| L2 Interfaces | `show system interfaces` |  |
| L2 Interfaces | `show interface detailed <name>` |  |
| L2 Interfaces | `show interface summary` |  |
| L2 Interfaces | `show lag summary` |  |
| L2 Interfaces | `show stats port summary <portId>` |  |
| L2 Interfaces | `show port detailed-info` |  |
| L2 Interfaces | `show port summary` |  |
| IP Flow | `show flow monitor summary` |  |
| L3 Interfaces | `show stats port summary <portId>` |  |
| Config Current | `show run-config commands` |  |
| Configuration saved | `show run-config commands` |  |
| Device info | `show memory statistics` |  |
| Device info | `show redundancy summary` |  |
| Device info | `show network summary` |  |
| Device info | `show inventory` |  |
| Device info | `show sysinfo` |  |
| AAA | `show run-config commands` |  |
| Init | `show inventory` |  |
| Init | `show version` |  |
| Init | `config paging disabled` |  |
| Port-channels | `show system interfaces` |  |
| SNMP | `show snmpcommunity` |  |
| SN | `show inventory` |  |
| Routing table | `show redundancy summary` |  |
| Routing table | `show system interfaces` |  |
| Routing table | `show interface detailed <name>` |  |
| Routing table | `show interface summary` |  |
| Routing table | `show lag summary` |  |
| Routing table | `show stats port summary <portId>` |  |
| Routing table | `show port detailed-info` |  |
| Routing table | `show port summary` |  |
| Port-channels | `show redundancy summary` |  |
| Disable pagination | `config paging disabled` |  |
| Port-channels | `show interface detail <int>` |  |
| Port-channels | `show interface summary` |  |
| Port-channels | `show lag summary` |  |
| Port-channels | `show port summary` |  |
| NTP | `show time` |  |
| Neighbor discovery protocols | `show cdp neighbors detail` |  |
| L3 Interfaces | `show redundancy summary` |  |
| L3 Interfaces | `show system interfaces` |  |
| L3 Interfaces | `show interface detailed <name>` |  |
| L3 Interfaces | `show interface summary` |  |
| L3 Interfaces | `show lag summary` |  |

---

## Supported Tasks

| Category | Task | Status | IPv6 | Notes |
|----------|------|--------|------|-------|
| config | Configuration saved | ○ | — |  |
| config | Startup config | ✓ | — |  |
| discovery | ARP | ○ | — |  |
| discovery | Config Current | ✓ | — |  |
| discovery | Device info | ✓ | — |  |
| discovery | Disable pagination | ✓ | — |  |
| discovery | Init | ✓ | — |  |
| discovery | L2 Interfaces | ✓ | — |  |
| discovery | L3 Interfaces | ✓ | — |  |
| discovery | MAC | ○ | — |  |
| discovery | Neighbor discovery protocols | ✓ | — |  |
| discovery | Routing table | ✓ | — | show route summary command could be added (routes via service port) |
| discovery | SN | ✓ | — |  |
| discovery | STP | ○ | — |  |
| discovery | Virtual Contexts | ○ | — |  |
| hardware | Chassis extenders | ○ | — |  |
| hardware | Cluster | ○ | — |  |
| hardware | Environment - Power & Fan | ✗ | — |  |
| hardware | POE | ○ | — |  |
| hardware | Stacking | ○ | — |  |
| hardware | Transceivers | ✓ | — | just a best effort mapping |
| hardware | VSS | ○ | — |  |
| l2 | _helpers/vlanIntList | ✗ | — |  |
| l2 | ACI | ○ | — |  |
| l2 | DHCPv4 Snooping | ○ | — |  |
| l2 | Error disabled interfaces | ○ | — |  |
| l2 | MAC multicast address table | ○ | — |  |
| l2 | MCAST - IGMP Snooping | ○ | — |  |
| l2 | Port-channels | ✓ | — |  |
| l2 | Storm control | ○ | — |  |
| l2 | STP port security | ✗ | — |  |
| l2 | Vlan | ✗ | — |  |
| l2 | VXLAN | ○ | — |  |
| l3 | BGP | ○ | — |  |
| l3 | Circuit cross-connect | ○ | — |  |
| l3 | EIGRP | ○ | — |  |
| l3 | FHRP | ○ | — |  |
| l3 | IS-IS | ○ | — |  |
| l3 | MCAST - IGMP | ✗ | — |  |
| l3 | MCAST - MROUTE | ✗ | — |  |
| l3 | MCAST - PIM | ✗ | — |  |
| l3 | OSPF | ✗ | — |  |
| l3 | OSPFv3 | ✗ | — |  |
| l3 | RIP | ○ | — |  |
| l3 | Route summary | ✗ | — |  |
| l3 | VPLS | ○ | — |  |
| l3 | VPWS | ○ | — |  |
| l3 | Vrf | ○ | — |  |
| management | IP Flow | ✓ | — |  |
| management | NTP | ✓ | — |  |
| management | Port mirroring | ✗ | — |  |
| management | SNMP | ✓ | — |  |
| management | Syslog | ✓ | — |  |
| mpls | MPLS - LDP | ○ | — |  |
| mpls | MPLS forwarding | ○ | — |  |
| oam | OAM - unidirectLinkDetection | ○ | — |  |
| qos | QOS | ✗ | — |  |
| security | AAA | ✓ | — | partial support - just radius and tacacs server are mapped/parsed now |
| security | ACL | ✗ | — |  |
| security | DMVPN | ○ | — |  |
| security | IPsec | ○ | — |  |
| security | NAT | ✗ | — |  |
| security | Object groups | ○ | — |  |
| security | Secured access ports | ○ | — |  |
| security | Zone firewall | ○ | — |  |
| wireless | Wireless - AP | ○ | — |  |
| wireless | Wireless - AP List | ✓ | — |  |
| wireless | Wireless - Client List | ✓ | — |  |
| wireless | Wireless - Lan List | ✓ | — |  |

---

## All Families from cisco

- [cisco@ios](https://feature-matrix-imenovsky01a.user.ipf.cx/3.7.3/family/88545858)
- [cisco@ios-xe](https://feature-matrix-imenovsky01a.user.ipf.cx/3.7.3/family/88545861)
- [cisco@nx-os](https://feature-matrix-imenovsky01a.user.ipf.cx/3.7.3/family/88545864)
- [cisco@ios-xr](https://feature-matrix-imenovsky01a.user.ipf.cx/3.7.3/family/88545867)
- [cisco@asa](https://feature-matrix-imenovsky01a.user.ipf.cx/3.7.3/family/88545870)
- **cisco@wlc-air** *(current)*
- [cisco@sg](https://feature-matrix-imenovsky01a.user.ipf.cx/3.7.3/family/88545876)
- [cisco@ftd](https://feature-matrix-imenovsky01a.user.ipf.cx/3.7.3/family/88545879)
- [cisco@aci](https://feature-matrix-imenovsky01a.user.ipf.cx/3.7.3/family/88545882)
- [cisco@meraki](https://feature-matrix-imenovsky01a.user.ipf.cx/3.7.3/family/88545885)

---

## Legend

- **✓** = Fully Integrated
- **✗** = Not Yet Integrated
- **○** = Not Available
- **🆕** = New in this version

*Generated: 2026-04-16T20:34:50.033Z*