# Family: frr — v3.6.3

**Version:** 3.6.3
**Vendor:** frr
**New in this version:** No
**URL:** https://feature-matrix-imenovsky01a.user.ipf.cx/3.6.3/family/88496056

---

## CLI Commands

| Task | Command | Notes |
|------|---------|-------|
| OSPF | `show ip ospf vrf all interface json` |  |
| Vrf | `show vrf` |  |
| SN | `show interface vrf all` |  |
| Routing table | `show interface vrf all` |  |
| Routing table | `show ip route vrf <VRF>` |  |
| Routing table | `show vrf` |  |
| Route summary | `show ip route vrf <VRF> summary [table <TABLE>]` |  |
| Route summary | `show vrf` |  |
| OSPF | `show interface vrf all` |  |
| OSPF | `show ip ospf vrf all neighbor detail json` |  |
| Disable pagination | `terminal length 0` |  |
| L3 Interfaces | `show interface vrf all` |  |
| L2 Interfaces | `show interface vrf all` |  |
| Config Current | `show running-config` |  |
| Device info | `show version` |  |
| BGP | `show interface vrf all` |  |
| BGP | `show ip bgp neighbors json` |  |
| Init | `no terminal paginate` |  |
| Init | `show version` |  |
| Init | `terminal length 0` |  |

---

## Supported Tasks

| Category | Task | Status | IPv6 | Notes |
|----------|------|--------|------|-------|
| — | Disable pagination | ✓ | — |  |
| config | Config Saved 🆕 | ○ | — |  |
| config | Startup Config 🆕 | ○ | — | Even though there exists command "show startup-config", it's output is always empty. Might be a bug or non-documented feature |
| discovery | ARP | ○ | — |  |
| discovery | Config Current | ✓ | — |  |
| discovery | Device info | ✓ | — |  |
| discovery | Init | ✓ | — |  |
| discovery | L2 Interfaces | ✓ | — |  |
| discovery | L3 Interfaces | ✓ | — |  |
| discovery | MAC | ○ | — |  |
| discovery | Neighbors 🆕 | ○ | — |  |
| discovery | Routing table | ✓ | — |  |
| discovery | SN | ✓ | — |  |
| discovery | STP | ○ | — | SW router, no L2 functionality |
| discovery | Virtual Contexts | ○ | — |  |
| hardware | Cluster | ○ | — |  |
| hardware | ENVIRONMENT - Power & Fan 🆕 | ○ | — |  |
| hardware | EXTENDERS 🆕 | ○ | — |  |
| hardware | POE | ○ | — |  |
| hardware | STACKING 🆕 | ○ | — |  |
| hardware | Transceivers | ○ | — |  |
| hardware | vss 🆕 | ○ | — |  |
| l2 | _helpers/vlanIntList | ○ | — |  |
| l2 | ACI | ○ | — |  |
| l2 | DHCPv4 Snooping | ○ | — |  |
| l2 | ERRDISABLEDINT 🆕 | ○ | — |  |
| l2 | MAC Multicast 🆕 | ○ | — |  |
| l2 | MCAST - IGMP Snooping | ○ | — |  |
| l2 | PORTCHANNEL 🆕 | ○ | — |  |
| l2 | Storm Control 🆕 | ○ | — |  |
| l2 | STP Port Security 🆕 | ○ | — |  |
| l2 | Vlan | ○ | — |  |
| l2 | VXLAN | ○ | — |  |
| l3 | BGP | ✓ | — |  |
| l3 | Ccc 🆕 | ○ | — |  |
| l3 | EIGRP | ✗ | — |  |
| l3 | FHRP | ✗ | — |  |
| l3 | IS-IS | ✗ | — |  |
| l3 | MCAST - IGMP | ○ | — |  |
| l3 | MCAST - MROUTE | ✗ | — |  |
| l3 | MCAST - PIM | ✗ | — |  |
| l3 | OSPF | ✓ | — |  |
| l3 | OSPFv3 | ✗ | — |  |
| l3 | RIP | ✗ | — |  |
| l3 | Route summary | ✓ | — |  |
| l3 | Vpls 🆕 | ○ | — |  |
| l3 | Vpws 🆕 | ○ | — |  |
| l3 | Vrf | ✓ | — |  |
| management | Flow 🆕 | ○ | — |  |
| management | NTP | ○ | — |  |
| management | portMirroring 🆕 | ○ | — |  |
| management | Syslog | ○ | — |  |
| mpls | MPLS/FWD 🆕 | ✗ | — |  |
| mpls | MPLS/LDP 🆕 | ✗ | — |  |
| oam | OAM - unidirectLinkDetection | ○ | — |  |
| qos | QOS | ○ | — |  |
| security | AAA | ○ | — |  |
| security | ACL | ○ | — |  |
| security | CRYPTO 🆕 | ○ | — |  |
| security | DMVPN | ○ | — |  |
| security | NAT | ○ | — |  |
| security | objectGroups 🆕 | ○ | — |  |
| security | Secured access ports | ○ | — |  |
| security | Zone firewall | ○ | — |  |
| wireless | Wireless - AP | ○ | — |  |
| wireless | Wireless - AP List | ○ | — |  |
| wireless | Wireless - Client List | ○ | — |  |
| wireless | Wireless - Lan List | ○ | — |  |

---

## All Families from frr

- **frr** *(current)*

---

## Legend

- **✓** = Fully Integrated
- **✗** = Not Yet Integrated
- **○** = Not Available
- **🆕** = New in this version

*Generated: 2026-04-16T20:50:48.332Z*