Family: cisco ftd (v3.5.2)
==================================================
Vendor: cisco
Family: ftd
New: No

CLI Commands:
--------------------------------------------------
  Route summary: show route summary
  L3 Interfaces: show arp
  L3 Interfaces: show network
  L3 Interfaces: show bridge-group
  MAC: show mac-address-table
  MAC: show interface
  MAC: show interface detail
  NAT: show nat detail
  NTP: show ntp [just a basic support, cmd "system support ntp" may later be added to get more details]
  objectGroups: show run
  objectGroups: show running-config all object
  L3 Interfaces: show interface detail
  Routing table: show route [For each arp record we need to know interface name, so we also have to download]
  Routing table: show interface [For each arp record we need to know interface name, so we also have to download]
  Routing table: show interface detail [For each arp record we need to know interface name, so we also have to download]
  Routing table: show network [For each arp record we need to know interface name, so we also have to download]
  SN: show serial-number
  Syslog: show running-config
  Syslog: show interface
  Syslog: show interface detail
  Syslog: show logging
  Device info: show inventory
  AAA: show running-config
  ACL: show run [just a limited ASA-like support]
  ACL: show interface [just a limited ASA-like support]
  ACL: show interface detail [just a limited ASA-like support]
  ACL: show running-config all object [just a limited ASA-like support]
  ARP: show arp
  ARP: show interface
  ARP: show interface detail
  Device info: show version
  Device info: show version system
  Init: show version
  Device info: show memory
  Config Saved: show startup-config
  Config Saved: show running-config
  Config Current: show running-config
  Startup Config: show startup-config
  L2 Interfaces: show interface
  L2 Interfaces: show interface detail
  L2 Interfaces: show network
  L3 Interfaces: show interface

Task Support:
--------------------------------------------------

  —:
    ○ Disable pagination

  config:
    ✓ Config Saved
    ✓ Startup Config

  discovery:
    ✓ ARP
    ✓ Config Current
    ✓ Device info
    ✓ Init
    ✓ L2 Interfaces
    ✓ L3 Interfaces
    ✓ MAC
    ○ Neighbors
    ✓ Routing table
    ✓ SN
    ✗ STP
    ✗ Virtual Contexts

  hardware:
    ✗ Cluster
    ✗ ENVIRONMENT - Power & Fan
    ○ EXTENDERS
    ○ POE
    ○ STACKING
    ✗ Transceivers

  l2:
    ✗ _helpers/vlanIntList
    ○ ACI
    ○ DHCPv4 Snooping
    ✗ ERRDISABLEDINT
    ○ MAC Multicast
    ○ MCAST - IGMP Snooping
    ✗ PORTCHANNEL
    ✗ STP Port Security
    ✗ Vlan
    ✗ VXLAN

  l3:
    ✗ BGP
    ○ Ccc
    ✗ EIGRP
    ○ FHRP
    ✗ IS-IS
    ✗ MCAST - IGMP
    ✗ MCAST - MROUTE
    ✗ MCAST - PIM
    ✗ OSPF
    ✗ OSPFv3
    ✗ RIP
    ✓ Route summary
    ○ Vpls
    ○ Vpws
    ○ Vrf

  management:
    ✗ Flow
    ✓ NTP
    ✗ portMirroring
    ✓ Syslog

  mpls:
    ○ MPLS/FWD
    ○ MPLS/LDP

  qos:
    ✗ QOS

  security:
    ✓ AAA
    ✓ ACL
    ✗ CRYPTO
    ○ DMVPN
    ✓ NAT
    ✓ objectGroups
    ○ Secured access ports
    ✗ Zone firewall

  wireless:
    ○ Wireless - AP
    ○ Wireless - AP List
    ○ Wireless - Client List
    ○ Wireless - Lan List

All Families from cisco:
--------------------------------------------------
  cisco@ios
  cisco@ios-xe
  cisco@nx-os
  cisco@ios-xr
  cisco@asa
  cisco@wlc-air
  cisco@sg
  cisco@ftd <-- current
  cisco@aci
  cisco@meraki

Legend: ✓=Full, ✗=Not Yet, ○=N/A