Family: cisco sg (v3.4.2)
==================================================
Vendor: cisco
Family: sg
New: No

CLI Commands:
--------------------------------------------------
  Secured access ports: show interface status
  L2 Interfaces: show interface status
  L2 Interfaces: show interface counters
  L2 Interfaces: show interface description
  L2 Interfaces: show interface switchport <int>
  L3 Interfaces: show ip interface
  MAC: show mac address-table
  Neighbors: show lldp neighbors
  Neighbors: show lldp neighbors <int>
  Neighbors: show cdp neighbors detail
  POE: show power inline
  PORTCHANNEL: show interfaces port-channel
  portMirroring: show ports monitor
  Routing table: show ip route
  Flow: show sflow configuration
  Secured access ports: show dot1x
  Secured access ports: show dot1x users
  SN: show inventory
  Syslog: show snmp users
  STP: show spanning-tree detail
  STP: show interface status
  STP: show interface switchport <int>
  STP: show vlan
  STP: show interfaces port-channel
  STP Port Security: show spanning-tree detail
  STP Port Security: show spanning-tree bpdu
  Syslog: show running-config
  Vlan: show vlan
  Device info: show version [nx9000 runs show inventory all to get transceivers]
  _helpers/vlanIntList: show interface switchport <int>
  _helpers/vlanIntList: show vlan
  _helpers/vlanIntList: show interfaces port-channel
  Disable pagination: terminal datadump
  Init: terminal datadump
  Init: show version
  Init: show inventory
  Init: enable
  Init: show privileges
  AAA: show running-config
  ACL: show interfaces access-lists
  ACL: show access-list
  ARP: show arp
  _helpers/vlanIntList: show interface status
  Device info: show inventory [nx9000 runs show inventory all to get transceivers]
  Device info: show system
  Device info: show line telnet
  Config Saved: show startup-config
  Config Saved: show running-config
  Config Current: show running-config
  Startup Config: show startup-config
  DHCPv4 Snooping: show ip dhcp snooping
  DHCPv4 Snooping: show ip dhcp snoobing binding
  ENVIRONMENT - Power & Fan: show system
  ENVIRONMENT - Power & Fan: show inventory
  ERRDISABLEDINT: show errdisable interfaces

Task Support:
--------------------------------------------------

  —:
    ✓ Disable pagination

  config:
    ✓ Config Saved
    ✓ Startup Config

  discovery:
    ✓ ARP
    ✓ Config Current
    ✓ Device info
    ✓ Init
    ✓ L2 Interfaces
    ✓ L3 Interfaces
    ✓ MAC
    ✓ Neighbors
    ✓ Routing table
    ✓ SN
    ✓ STP
    ○ Virtual Contexts

  hardware:
    ○ Cluster
    ✓ ENVIRONMENT - Power & Fan
    ○ EXTENDERS
    ✓ POE
    ✗ STACKING
    ✗ Transceivers

  l2:
    ✓ _helpers/vlanIntList
    ○ ACI
    ✓ DHCPv4 Snooping
    ✓ ERRDISABLEDINT
    ✓ PORTCHANNEL
    ✓ STP Port Security
    ✓ Vlan
    ○ VXLAN

  l3:
    ✗ BGP
    ✗ EIGRP
    ✗ FHRP
    ○ IS-IS
    ✗ OSPF
    ✗ OSPFv3
    ✗ RIP
    ✗ Route summary
    ○ Vrf

  management:
    ✓ Flow
    ○ NTP
    ✓ portMirroring
    ✓ Syslog

  mpls:
    ○ MPLS/FWD
    ○ MPLS/LDP

  qos:
    ✗ QOS

  security:
    ✓ AAA
    ✓ ACL
    ○ CRYPTO
    ○ DMVPN
    ○ NAT
    ✗ objectGroups
    ✓ Secured access ports
    ○ Zone firewall

  wireless:
    ○ Wireless - AP List
    ○ Wireless - Client List
    ○ Wireless - Lan List

All Families from cisco:
--------------------------------------------------
  cisco@ios
  cisco@ios-xe
  cisco@nx-os
  cisco@ios-xr
  cisco@asa
  cisco@wlc-air
  cisco@sg <-- current
  cisco@ftd
  cisco@aci

Legend: ✓=Full, ✗=Not Yet, ○=N/A