Family: juniper junos (v3.2.1)
==================================================
Vendor: juniper
Family: junos
New: No

CLI Commands:
--------------------------------------------------
  POE: show poe interface
  Secured access ports: show dot1x interface detail
  Routing table: show route active-path
  Route summary: show bgp neighbor
  Route summary: show route summary
  RIP: show rip statistics instance all
  RIP: show rip interfaces instance all
  portMirroring: show forwarding-options analyzer
  portMirroring: show analyzer
  PORTCHANNEL: show lacp interfaces
  PORTCHANNEL: show interfaces statistics detail
  POE: show poe interface <intName>
  Secured access ports: show interfaces terse
  OSPF: show ospf neighbor detail instance all
  OSPF: show ospf interface detail instance <instanceName>
  NTP: show system connections
  NTP: show ntp associations no-resolve
  Neighbors: show lldp neighbors interface <int>
  Neighbors: show lldp neighbors
  MPLS/FWD: show route active-path
  MPLS/LDP: show ldp neighbor extensive instance <vrf>
  MPLS/LDP: show ldp interface extensive instance <vrf>
  MPLS/LDP: show interfaces statistics detail
  STP Port Security: show spanning-tree interface detail [only EX and QFX switches use even show ethernet-switching interfaces]
  Zone firewall: show configuration groups junos-defaults applications | display set
  Zone firewall: show configuration security applications | display set
  Zone firewall: show configuration security address-book | display set
  Zone firewall: show configuration security policies | display set
  Zone firewall: show security zones
  Transceivers: show interfaces diagnostics optics
  Transceivers: show chassis hardware
  Syslog: show configuration | display set
  STP Port Security: show configuration | display set [only EX and QFX switches use even show ethernet-switching interfaces]
  STP Port Security: show ethernet-switching interfaces [only EX and QFX switches use even show ethernet-switching interfaces]
  MAC: show vlans detail
  STP: show spanning-tree statistics interface
  STP: show spanning-tree mstp configuration
  STP: show spanning-tree interface detail
  STP: show spanning-tree bridge detail
  STP: show vlans detail
  STACKING: show virtual-chassis vc-port all-member
  STACKING: show virtual-chassis device-topology
  STACKING: show virtual-chassis
  Syslog: show interfaces statistics detail
  SN: show chassis hardware
  BGP: show bgp summary <instanceName>
  ENVIRONMENT - Power & Fan: show version
  ENVIRONMENT - Power & Fan: show chassis hardware
  Config Current: show configuration
  Device info: show chassis routing-engine
  Device info: show system connections
  Device info: show system uptime
  Device info: show chassis hardware
  Device info: show version
  Cluster: show chassis cluster interfaces
  Cluster: show chassis cluster status
  ENVIRONMENT - Power & Fan: show chassis environment
  BGP: show bgp neighbor instance <instanceName>
  BGP: show route instance detail
  ARP: show arp no-resolve
  ACL: show configuration policy-options | display set
  ACL: show interfaces statistics detail
  ACL: show configuration firewall | display omit
  AAA: show configuration
  Init: set cli screen-width 0
  Init: show version
  Init: set cli screen-length 0
  IS-IS: show isis adjacency extensive instance <instanceName>
  MAC: show ethernet-switching table
  L3 Interfaces: show vrrp detail
  L3 Interfaces: show route instance detail
  L3 Interfaces: show interfaces statistics detail
  L2 Interfaces: show vlans detail
  L2 Interfaces: show interfaces terse
  L2 Interfaces: show interfaces statistics detail
  IS-IS: show chassis cluster status
  IS-IS: show version
  IS-IS: show interfaces statistics detail
  Disable pagination: set cli screen-length 0
  IS-IS: show isis overview instance <instanceName>
  IS-IS: show isis interface extensive instance <instanceName>
  Flow: show configuration interfaces | match sampling | display set
  Flow: show configuration forwarding-options sampling
  Flow: show sflow interface
  Flow: show sflow collector
  Flow: show sflow
  FHRP: show vrrp detail
  ERRDISABLEDINT: show spanning-tree interface detail [EX and QFX switches use even show ethernet-switching interface, others use just show spanning-tree interface detail]
  ERRDISABLEDINT: show ethernet-switching interface [EX and QFX switches use even show ethernet-switching interface, others use just show spanning-tree interface detail]

Task Support:
--------------------------------------------------

  —:
    ✓ Disable pagination

  config:
    ○ Config Saved
    ○ Startup Config

  discovery:
    ✓ ARP
    ✓ Config Current
    ✓ Device info
    ✓ Init
    ✓ L2 Interfaces
    ✓ L3 Interfaces
    ✓ MAC
    ✓ Neighbors
    ✓ Routing table
    ✓ SN
    ✓ STP
    ○ Virtual Contexts

  hardware:
    ✓ Cluster
    ✓ ENVIRONMENT - Power & Fan
    ○ EXTENDERS
    ✓ POE
    ✓ STACKING
    ✓ Transceivers

  l2:
    ○ ACI
    ✓ ERRDISABLEDINT
    ✓ PORTCHANNEL
    ✓ STP Port Security
    ✗ VXLAN

  l3:
    ✓ BGP
    ○ EIGRP
    ✓ FHRP
    ✓ IS-IS
    ✓ OSPF
    ✗ OSPFv3
    ✓ RIP
    ✓ Route summary

  management:
    ✓ Flow
    ✓ NTP
    ✓ portMirroring
    ✓ Syslog

  mpls:
    ✓ MPLS/FWD
    ✓ MPLS/LDP

  qos:
    ✗ QOS

  security:
    ✓ AAA
    ✓ ACL
    ✗ CRYPTO
    ○ DMVPN
    ✗ NAT
    ✗ objectGroups
    ✓ Secured access ports
    ✓ Zone firewall

  wireless:
    ○ Wireless - AP List
    ○ Wireless - Client List
    ○ Wireless - Lan List

All Families from juniper:
--------------------------------------------------
  juniper@junos <-- current

Legend: ✓=Full, ✗=Not Yet, ○=N/A