Family: cisco wlc-air (v2.3.1)
==================================================
Vendor: cisco
Family: wlc-air
New: No

CLI Commands:
--------------------------------------------------
  Wireless - AP List: show ap summary [older & deprecated commands show ap config 802.11a/b summary are only used if newer show advanced 802.11a/b summary fail]
  SN: show inventory
  Transceivers: show port summary
  Transceivers: show port detailed-info
  Transceivers: show stats port summary
  Wireless - Client List: show client detail
  Wireless - Client List: show client summary
  Wireless - Client List: show client detail <clientMac>
  Wireless - Client List: show ap summary
  Wireless - Lan List: show port summary
  Wireless - Lan List: show port detailed-info
  Wireless - Lan List: show stats port summary <portId>
  Wireless - Lan List: show lag summary
  Wireless - Lan List: show interface detailed <wlanIntName>
  PORTCHANNEL: show interface detail <int>
  Wireless - AP List: show ap config general <apName> [older & deprecated commands show ap config 802.11a/b summary are only used if newer show advanced 802.11a/b summary fail]
  Wireless - AP List: show ap stats ethernet <apName> [older & deprecated commands show ap config 802.11a/b summary are only used if newer show advanced 802.11a/b summary fail]
  Wireless - AP List: show ap cdp neighbors all [older & deprecated commands show ap config 802.11a/b summary are only used if newer show advanced 802.11a/b summary fail]
  Wireless - AP List: show ap inventory <apName> [older & deprecated commands show ap config 802.11a/b summary are only used if newer show advanced 802.11a/b summary fail]
  Wireless - AP List: show advanced 802.11a summary [older & deprecated commands show ap config 802.11a/b summary are only used if newer show advanced 802.11a/b summary fail]
  Wireless - AP List: show advanced 802.11b summary [older & deprecated commands show ap config 802.11a/b summary are only used if newer show advanced 802.11a/b summary fail]
  Wireless - AP List: show ap wlan 802.11a <apName> [older & deprecated commands show ap config 802.11a/b summary are only used if newer show advanced 802.11a/b summary fail]
  Wireless - AP List: show ap wlan 802.11b <apName> [older & deprecated commands show ap config 802.11a/b summary are only used if newer show advanced 802.11a/b summary fail]
  Wireless - AP List: show wlan summary [older & deprecated commands show ap config 802.11a/b summary are only used if newer show advanced 802.11a/b summary fail]
  Wireless - AP List: show wlan <wlanId> [older & deprecated commands show ap config 802.11a/b summary are only used if newer show advanced 802.11a/b summary fail]
  Wireless - AP List: show ap config 802.11a summary [older & deprecated commands show ap config 802.11a/b summary are only used if newer show advanced 802.11a/b summary fail]
  Wireless - AP List: show ap config 802.11b summary [older & deprecated commands show ap config 802.11a/b summary are only used if newer show advanced 802.11a/b summary fail]
  L2 Interfaces: show port detailed-info [
       Dependent on the following commands:
         * cisco/_wlcair/physPortSummary
         * cisco/_wlcair/portDetailedInfo
         * cisco/_wlcair/statsPortSummary]
  Init: config paging disabled
  Init: show version
  Init: show inventory
  AAA: show run-config commands
  Device info: show sysinfo
  Device info: show inventory
  Device info: show network summary
  Device info: show redundancy summary
  Device info: show memory statistics
  Config Saved: show run-config commands
  Config Current: show run-config commands
  Startup Config: show run-config commands
  L2 Interfaces: show port summary [
       Dependent on the following commands:
         * cisco/_wlcair/physPortSummary
         * cisco/_wlcair/portDetailedInfo
         * cisco/_wlcair/statsPortSummary]
  Disable pagination: config paging disabled
  L2 Interfaces: show stats port summary <portId> [
       Dependent on the following commands:
         * cisco/_wlcair/physPortSummary
         * cisco/_wlcair/portDetailedInfo
         * cisco/_wlcair/statsPortSummary]
  L3 Interfaces: show inventory [
      Dependent on the following commands:
        * cisco/showInventory
        * cisco/_wlcair/physPortSummary
        * cisco/_wlcair/portDetailedInfo 
        * cisco/_wlcair/statsPortSummary
        * cisco/_wlcair/interfaceSummary
        Depends on tasks:
        * _helper/cisco/wlcair/physInterfaceList]
  L3 Interfaces: show port summary [
      Dependent on the following commands:
        * cisco/showInventory
        * cisco/_wlcair/physPortSummary
        * cisco/_wlcair/portDetailedInfo 
        * cisco/_wlcair/statsPortSummary
        * cisco/_wlcair/interfaceSummary
        Depends on tasks:
        * _helper/cisco/wlcair/physInterfaceList]
  L3 Interfaces: show port detailed-info [
      Dependent on the following commands:
        * cisco/showInventory
        * cisco/_wlcair/physPortSummary
        * cisco/_wlcair/portDetailedInfo 
        * cisco/_wlcair/statsPortSummary
        * cisco/_wlcair/interfaceSummary
        Depends on tasks:
        * _helper/cisco/wlcair/physInterfaceList]
  L3 Interfaces: show stats port summary [
      Dependent on the following commands:
        * cisco/showInventory
        * cisco/_wlcair/physPortSummary
        * cisco/_wlcair/portDetailedInfo 
        * cisco/_wlcair/statsPortSummary
        * cisco/_wlcair/interfaceSummary
        Depends on tasks:
        * _helper/cisco/wlcair/physInterfaceList]
  L3 Interfaces: show interface summary [
      Dependent on the following commands:
        * cisco/showInventory
        * cisco/_wlcair/physPortSummary
        * cisco/_wlcair/portDetailedInfo 
        * cisco/_wlcair/statsPortSummary
        * cisco/_wlcair/interfaceSummary
        Depends on tasks:
        * _helper/cisco/wlcair/physInterfaceList]
  L3 Interfaces: show interface detailed <int> [
      Dependent on the following commands:
        * cisco/showInventory
        * cisco/_wlcair/physPortSummary
        * cisco/_wlcair/portDetailedInfo 
        * cisco/_wlcair/statsPortSummary
        * cisco/_wlcair/interfaceSummary
        Depends on tasks:
        * _helper/cisco/wlcair/physInterfaceList]
  Neighbors: show cdp neighbors detail
  NTP: show time
  PORTCHANNEL: show port summary
  PORTCHANNEL: show lag summary
  PORTCHANNEL: show interface summary

Task Support:
--------------------------------------------------

  —:
    ✓ Disable pagination

  config:
    ○ Config Saved
    ✓ Startup Config

  discovery:
    ○ ARP
    ○ Cisco ASA context
    ✓ Config Current
    ✓ Device info
    ✓ Init
    ✓ L2 Interfaces
    ✓ L3 Interfaces
    ○ MAC
    ✓ Neighbors
    ✗ Routing table
    ✓ SN
    ○ STP

  hardware:
    ○ Cluster
    ✗ ENVIRONMENT - Power & Fan
    ○ EXTENDERS
    ○ POE
    ○ STACKING
    ✓ Transceivers

  l2:
    ○ ERRDISABLEDINT
    ✓ PORTCHANNEL
    ✗ STP Port Security

  l3:
    ○ BGP
    ○ EIGRP
    ○ FHRP
    ○ IS-IS
    ○ LDP
    ✗ OSPF
    ○ RIP
    ✗ Route summary

  management:
    ✓ NTP
    ✗ portMirroring

  qos:
    ✗ QOS

  security:
    ✓ AAA
    ✗ ACL
    ○ CRYPTO
    ○ DMVPN
    ✗ NAT
    ○ objectGroups
    ○ Secured access ports
    ○ Zone firewall

  wireless:
    ✓ Wireless - AP List
    ✓ Wireless - Client List
    ✓ Wireless - Lan List

All Families from cisco:
--------------------------------------------------
  cisco@ios
  cisco@ios-xe
  cisco@nx-os
  cisco@ios-xr
  cisco@asa
  cisco@wlc-air <-- current
  cisco@sg

Legend: ✓=Full, ✗=Not Yet, ○=N/A