Family: huawei vrp (v2.3.0)
==================================================
Vendor: huawei
Family: vrp
New: No

CLI Commands:
--------------------------------------------------
  Routing table: display ip routing-table vpn-instance <name> verbose
  Neighbors: display lldp neighbor
  PORTCHANNEL: display eth-trunk
  PORTCHANNEL: display interface
  portMirroring: display port-mirroring
  portMirroring: display observe-port
  Routing table: display ip routing-table statistics
  Routing table: display ip routing-table verbose
  Routing table: display ip routing-table protocol <name> verbose
  Routing table: display ip vpn-instance
  Routing table: display ip routing-table vpn-instance <name> statistics
  MAC: display mac-address
  Routing table: display ip routing-table vpn-instance <name> protocol <name> verbose
  SN: display esn [display ip interface - for lab environment (non-production)]
  SN: display device manufacture-info [display ip interface - for lab environment (non-production)]
  STP: display interface
  STP: display port vlan active
  STP: display port vlan
  STP: display vlan
  STP: display stp
  STP: display stp region-configuration
  Config Current: display current-configuration
  Init: display version
  Init: screen-length 0 temporary
  ARP: display arp
  Device info: display version [
      * display telnet server - used for VRP version 8
      * display telnet server status - used for VRP version 5
      ]
  Device info: display device [
      * display telnet server - used for VRP version 8
      * display telnet server status - used for VRP version 5
      ]
  Device info: display device manufacture-info [
      * display telnet server - used for VRP version 8
      * display telnet server status - used for VRP version 5
      ]
  Device info: display telnet server [
      * display telnet server - used for VRP version 8
      * display telnet server status - used for VRP version 5
      ]
  Device info: display  telnet server status [
      * display telnet server - used for VRP version 8
      * display telnet server status - used for VRP version 5
      ]
  Device info: display memory [
      * display telnet server - used for VRP version 8
      * display telnet server status - used for VRP version 5
      ]
  Disable pagination: screen-length 0 temporary
  FHRP: display vrrp
  L2 Interfaces: display interface
  L2 Interfaces: display port vlan active
  L2 Interfaces: display port vlan
  L2 Interfaces: display vlan
  L3 Interfaces: display ip interface
  L3 Interfaces: display ip vpn-instance
  L3 Interfaces: display ip vpn-instance <name> interface
  L3 Interfaces: display vrrp

Task Support:
--------------------------------------------------

  —:
    ✓ Disable pagination

  config:
    ✗ Config Saved
    ✗ Startup Config

  discovery:
    ✓ ARP
    ○ Cisco ASA context
    ✓ Config Current
    ✓ Device info
    ✓ Init
    ✓ L2 Interfaces
    ✓ L3 Interfaces
    ✓ MAC
    ✓ Neighbors
    ✓ Routing table
    ✓ SN
    ✓ STP

  hardware:
    ○ Cluster
    ✗ ENVIRONMENT - Power & Fan
    ✗ EXTENDERS
    ✗ POE
    ✗ STACKING
    ✗ Transceivers

  l2:
    ✗ ERRDISABLEDINT
    ✓ PORTCHANNEL
    ✗ STP Port Security

  l3:
    ✗ BGP
    ○ EIGRP
    ✓ FHRP
    ✗ IS-IS
    ✗ LDP
    ✗ OSPF
    ✗ RIP
    ✗ Route summary

  management:
    ✗ NTP
    ✓ portMirroring

  qos:
    ✗ QOS

  security:
    ✗ AAA
    ✗ ACL
    ✗ CRYPTO
    ✗ DMVPN
    ○ NAT
    ✗ objectGroups
    ✗ Secured access ports
    ✗ Zone firewall

  wireless:
    ✗ Wireless - AP List
    ✗ Wireless - Client List
    ✗ Wireless - Lan List

All Families from huawei:
--------------------------------------------------
  huawei@vrp <-- current

Legend: ✓=Full, ✗=Not Yet, ○=N/A