Family: cisco nx-os (v2.3.0)
==================================================
Vendor: cisco
Family: nx-os
New: No

CLI Commands:
--------------------------------------------------
  LDP: show mpls ldp neighbor detail
  OSPF: show ip ospf interface vrf all
  OSPF: show ip ospf neighbor vrf all
  objectGroups: show object-group
  NTP: show ntp peer-status
  Neighbors: show cdp neighbors detail
  Neighbors: show lldp neighbors detail
  LDP: show mpls switching
  LDP: show mpls interfaces
  OSPF: show ip vrf interface
  LDP: show ip interface
  MAC: show mac address
  L3 Interfaces: show vrrp
  L3 Interfaces: show glbp brief
  L3 Interfaces: show hsrp brief
  L3 Interfaces: show ip interface vrf all
  L2 Interfaces: show interface switchport
  L2 Interfaces: show interface
  Routing table: show ip route vrf <vrf> detail
  STP Port Security: show spanning-tree detail
  STP: show spanning-tree mst
  STP: show spanning-tree detail
  STP: show spanning-tree summary
  SN: show vdc current-vdc
  SN: show version
  Routing table: show mpls interfaces
  Routing table: show mpls switching
  FHRP: show vrrp
  Routing table: show ip route detail
  Route summary: show routing summary vrf all
  RIP: show rip vrf all
  RIP: show rip neighbors vrf all
  RIP: show rip interfaces vrf all
  portMirroring: show monitor session all
  PORTCHANNEL: show vpc
  PORTCHANNEL: show port-channel summary
  ARP: show ip arp vrf <vrf>
  Device info: show hostname
  Device info: show system resources
  Device info: show vdc
  Device info: show inventory
  Device info: show version
  BGP: show ip route summary
  BGP: show ip bgp vrf all summary
  BGP: show ip bgp vrf all neighbors
  Config Saved: show startup-config
  ARP: show ip arp
  ACL: show access-list summary
  ACL: show ip access-list
  AAA: show running-config
  Init: show user-account
  Init: terminal width 256
  Init: show version
  Init: terminal length 0
  ENVIRONMENT - Power & Fan: show vdc current-vdc
  FHRP: show glbp brief
  FHRP: show hsrp brief
  EXTENDERS: show interface fex-fabric
  EXTENDERS: show fex detail
  ERRDISABLEDINT: show interface status err-disabled
  ENVIRONMENT - Power & Fan: show environment fex all
  ENVIRONMENT - Power & Fan: show fex detail
  ENVIRONMENT - Power & Fan: show environment
  Disable pagination: terminal length 0
  ENVIRONMENT - Power & Fan: show version
  ENVIRONMENT - Power & Fan: show hostname
  EIGRP: show ip eigrp neighbor vrf all
  EIGRP: shpw ip eigrp interfaces vrf all
  Startup Config: show startup-config
  Config Current: show running-config
  Config Saved: show running-config

Task Support:
--------------------------------------------------

  —:
    ✓ Disable pagination

  config:
    ✓ Config Saved
    ✓ Startup Config

  discovery:
    ✓ ARP
    ○ Cisco ASA context
    ✓ Config Current
    ✓ Device info
    ✓ Init
    ✓ L2 Interfaces
    ✓ L3 Interfaces
    ✓ MAC
    ✓ Neighbors
    ✓ Routing table
    ✓ SN
    ✓ STP

  hardware:
    ○ Cluster
    ✓ ENVIRONMENT - Power & Fan
    ✓ EXTENDERS
    ✗ POE
    ✗ STACKING
    ✗ Transceivers

  l2:
    ✓ ERRDISABLEDINT
    ✓ PORTCHANNEL
    ✓ STP Port Security

  l3:
    ✓ BGP
    ✓ EIGRP
    ✓ FHRP
    ✗ IS-IS
    ✓ LDP
    ✓ OSPF
    ✓ RIP
    ✓ Route summary

  management:
    ✓ NTP
    ✓ portMirroring

  qos:
    ✗ QOS

  security:
    ✓ AAA
    ✓ ACL
    ○ CRYPTO
    ○ DMVPN
    ✗ NAT
    ✓ objectGroups
    ✗ Secured access ports
    ○ Zone firewall

  wireless:
    ○ Wireless - AP List
    ○ Wireless - Client List
    ○ Wireless - Lan List

All Families from cisco:
--------------------------------------------------
  cisco@ios
  cisco@ios-xe
  cisco@nx-os <-- current
  cisco@ios-xr
  cisco@asa
  cisco@wlc-air
  cisco@sg

Legend: ✓=Full, ✗=Not Yet, ○=N/A