Back to Overview
List of Commands for Task Device info
Fundamental device properties and inventory
| VENDOR / FAMILY | COMMAND | TRANSPORT | NOTES |
|---|---|---|---|
| alcatel@aos | show chassis | CLI | |
| alcatel@aos | show lldp local-system | CLI | |
| alcatel@aos | show system | CLI | |
| arista@eos | show hostname | CLI | |
| arista@eos | show inventory | CLI | |
| arista@eos | show lldp local-info | section Local | CLI | |
| arista@eos | show version | CLI | |
| avocent@acs | shell cat /proc/uptime | CLI | xdpIdList holds every interface MAC: the appliance advertises one LLDP chassis ID per interface rather than one per device |
| avocent@acs | shell ip -s addr show | CLI | xdpIdList holds every interface MAC: the appliance advertises one LLDP chassis ID per interface rather than one per device |
| avocent@acs | show /network/settings/ | CLI | xdpIdList holds every interface MAC: the appliance advertises one LLDP chassis ID per interface rather than one per device |
| avocent@acs | show /system/information/ | CLI | xdpIdList holds every interface MAC: the appliance advertises one LLDP chassis ID per interface rather than one per device |
| avocent@acs | show /system/security/security_profile/ | CLI | xdpIdList holds every interface MAC: the appliance advertises one LLDP chassis ID per interface rather than one per device |
| avocent@acs | show /system/usage/memory/ | CLI | xdpIdList holds every interface MAC: the appliance advertises one LLDP chassis ID per interface rather than one per device |
| aws | SDK directconnect:DescribeDirectConnectGatewaysCommand | API | |
| aws | SDK ec2:DescribeInternetGatewaysCommand | API | |
| aws | SDK ec2:DescribeNatGatewaysCommand | API | |
| aws | SDK ec2:DescribeTransitGatewaysCommand | API | |
| aws | SDK ec2:DescribeVpcEndpointsCommand | API | |
| aws | SDK ec2:DescribeVpcsCommand | API | |
| aws | SDK ec2:DescribeVpnGatewaysCommand | API | |
| aws | SDK elbv2:DescribeLoadBalancersCommand | API | |
| aws | SDK elbv2:DescribeTagsCommand | API | |
| aws | SDK networkmanager:GetCoreNetworkCommand | API | |
| aws | SDK networkmanager:ListCoreNetworksCommand | API | |
| azure | GET /applicationGateways | API | |
| azure | GET /azureFirewalls | API | |
| azure | GET /connections | API | |
| azure | GET /expressRouteCircuits | API | |
| azure | GET /expressRouteGateways | API | |
| azure | GET /loadBalancers | API | |
| azure | GET /natGateways | API | |
| azure | GET /subscriptions | API | |
| azure | GET /virtualHubs | API | |
| azure | GET /virtualNetworkGateways | API | |
| azure | GET /virtualNetworks | API | |
| azure | GET /vpnGateways | API | |
| brocade@fastiron | show chassis | CLI | |
| brocade@fastiron | show lldp local-info | CLI | |
| brocade@fastiron | show memory | CLI | |
| brocade@fastiron | show running-config | CLI | |
| brocade@fastiron | show telnet | CLI | |
| brocade@fastiron | show version | CLI | |
| checkpoint@gaia | fw ctl pstat | CLI | "show asset <memory | network | system>" would run only if "show asset all" failed |
| checkpoint@gaia | show asset all | CLI | "show asset <memory | network | system>" would run only if "show asset all" failed |
| checkpoint@gaia | show asset memory | CLI | "show asset <memory | network | system>" would run only if "show asset all" failed |
| checkpoint@gaia | show asset network | CLI | "show asset <memory | network | system>" would run only if "show asset all" failed |
| checkpoint@gaia | show asset system | CLI | "show asset <memory | network | system>" would run only if "show asset all" failed |
| checkpoint@gaia | show cluster state | CLI | "show asset <memory | network | system>" would run only if "show asset all" failed |
| checkpoint@gaia | show domainname | CLI | "show asset <memory | network | system>" would run only if "show asset all" failed |
| checkpoint@gaia | show hostname | CLI | "show asset <memory | network | system>" would run only if "show asset all" failed |
| checkpoint@gaia | show interface <name> | CLI | "show asset <memory | network | system>" would run only if "show asset all" failed |
| checkpoint@gaia | show management interface | CLI | "show asset <memory | network | system>" would run only if "show asset all" failed |
| checkpoint@gaia | show net-access telnet | CLI | "show asset <memory | network | system>" would run only if "show asset all" failed |
| checkpoint@gaia | show security-gateway memory statistics | CLI | "show asset <memory | network | system>" would run only if "show asset all" failed |
| checkpoint@gaia | show security-gateway policy | CLI | "show asset <memory | network | system>" would run only if "show asset all" failed |
| checkpoint@gaia | show uptime | CLI | "show asset <memory | network | system>" would run only if "show asset all" failed |
| checkpoint@gaia | show version all | CLI | "show asset <memory | network | system>" would run only if "show asset all" failed |
| checkpoint@gaia | show vrrp | CLI | "show asset <memory | network | system>" would run only if "show asset all" failed |
| checkpoint@gaia-embedded | show device-details | CLI | |
| checkpoint@gaia-embedded | show diag | CLI | |
| checkpoint@gaia-embedded | show memory-usage | CLI | |
| checkpoint@gaia-embedded | show software-version | CLI | |
| checkpoint@gaia-embedded | uptime | CLI | |
| cisco@aci | show cdp global | CLI | |
| cisco@aci | show cdp internal global-info | CLI | |
| cisco@aci | show endpoint detail | CLI | |
| cisco@aci | show fex detail | CLI | |
| cisco@aci | show hostname | CLI | |
| cisco@aci | show interface | CLI | |
| cisco@aci | show interface fex-fabric | CLI | |
| cisco@aci | show inventory | CLI | |
| cisco@aci | show system resources | CLI | |
| cisco@aci | show version | CLI | |
| cisco@apic | cat /proc/meminfo | CLI | |
| cisco@apic | ifconfig | CLI | |
| cisco@apic | show controller detail | CLI | |
| cisco@apic | show dns-domain | CLI | |
| cisco@asa | changeto context <contextName> | CLI | |
| cisco@asa | changeto system | CLI | |
| cisco@asa | show cluster | CLI | |
| cisco@asa | show context | CLI | |
| cisco@asa | show failover | CLI | |
| cisco@asa | show hostname | CLI | |
| cisco@asa | show inventory | CLI | |
| cisco@asa | show memory | CLI | |
| cisco@asa | show running-config | CLI | |
| cisco@asa | show version | CLI | |
| cisco@encs | show system services | CLI | |
| cisco@encs | show system uptime | CLI | |
| cisco@encs | show version | CLI | |
| cisco@encs | support show domainname | CLI | |
| cisco@encs | support show ifconfig | CLI | |
| cisco@encs | support show meminfo | CLI | |
| cisco@ftd | show cluster | CLI | |
| cisco@ftd | show failover | CLI | |
| cisco@ftd | show inventory | CLI | |
| cisco@ftd | show memory | CLI | |
| cisco@ftd | show version | CLI | |
| cisco@ftd | show version system | CLI | |
| cisco@ios | show hosts | CLI | |
| cisco@ios | show inventory | CLI | |
| cisco@ios | show memory statistics | CLI | |
| cisco@ios | show running-config | CLI | |
| cisco@ios | show running-config view full | CLI | |
| cisco@ios | show spanning-tree detail | CLI | |
| cisco@ios | show version | CLI | |
| cisco@ios-xe | show hosts | CLI | |
| cisco@ios-xe | show inventory | CLI | |
| cisco@ios-xe | show memory statistics | CLI | |
| cisco@ios-xe | show processes memory | CLI | |
| cisco@ios-xe | show processes memory platform | CLI | |
| cisco@ios-xe | show running-config | CLI | |
| cisco@ios-xe | show running-config view full | CLI | |
| cisco@ios-xe | show spanning-tree detail | CLI | |
| cisco@ios-xe | show version | CLI | |
| cisco@ios-xr | show hosts | CLI | |
| cisco@ios-xr | show inventory | CLI | |
| cisco@ios-xr | show inventory all | CLI | |
| cisco@ios-xr | show memory summary | CLI | |
| cisco@ios-xr | show running-config | CLI | |
| cisco@ios-xr | show version | CLI | |
| cisco@meraki | GET /networks/<networkId>/switch/stacks | API | |
| cisco@meraki | GET /organizations | API | |
| cisco@meraki | GET /organizations/<organizationId> | API | |
| cisco@meraki | GET /organizations/<organizationId>/appliance/uplink/statuses | API | |
| cisco@meraki | GET /organizations/<organizationId>/devices | API | |
| cisco@meraki | GET /organizations/<organizationId>/devices/availabilities | API | |
| cisco@meraki | GET /organizations/<organizationId>/devices/uplinks | API | |
| cisco@meraki | GET /organizations/<organizationId>/networks | API | |
| cisco@nx-os | show cdp global | CLI | nx9000 - show inventory all, otherwise show inventory |
| cisco@nx-os | show cdp internal global-info | CLI | nx9000 - show inventory all, otherwise show inventory |
| cisco@nx-os | show feature | CLI | nx9000 - show inventory all, otherwise show inventory |
| cisco@nx-os | show fex detail | CLI | nx9000 - show inventory all, otherwise show inventory |
| cisco@nx-os | show hostname | CLI | |
| cisco@nx-os | show hosts | CLI | |
| cisco@nx-os | show interface | CLI | |
| cisco@nx-os | show interface fex-fabric | CLI | nx9000 - show inventory all, otherwise show inventory |
| cisco@nx-os | show inventory [all] | CLI | nx9000 - show inventory all, otherwise show inventory |
| cisco@nx-os | show running-config | CLI | nx9000 - show inventory all, otherwise show inventory |
| cisco@nx-os | show system resources | CLI | nx9000 - show inventory all, otherwise show inventory |
| cisco@nx-os | show vdc | CLI | nx9000 - show inventory all, otherwise show inventory |
| cisco@nx-os | show version | CLI | nx9000 - show inventory all, otherwise show inventory |
| cisco@sg | show cdp | CLI | |
| cisco@sg | show hosts | CLI | |
| cisco@sg | show inventory | CLI | |
| cisco@sg | show line telnet | CLI | |
| cisco@sg | show lldp local <intName> | CLI | |
| cisco@sg | show spanning-tree detail | CLI | |
| cisco@sg | show system | CLI | |
| cisco@sg | show version | CLI | |
| cisco@viptela | GET /dataservice/device | API | |
| cisco@viptela | GET /dataservice/device/bfd/sessions?deviceId=<deviceId> | API | |
| cisco@viptela | GET /dataservice/device/hardware/inventory?deviceId=<deviceId> | API | |
| cisco@viptela | GET /dataservice/device/interface?deviceId=<deviceId> | API | |
| cisco@viptela | GET /dataservice/device/system/status?deviceId=<deviceId> | API | |
| cisco@viptela | GET /dataservice/template/config/attached/<uuid>?type=CFS | API | |
| cisco@wlc-air | show inventory | CLI | |
| cisco@wlc-air | show memory statistics | CLI | |
| cisco@wlc-air | show network summary | CLI | |
| cisco@wlc-air | show redundancy summary | CLI | |
| cisco@wlc-air | show sysinfo | CLI | |
| citrix@adc | shell dmesg | grep CPU: | CLI | |
| citrix@adc | shell lmutil lmhostid | CLI | |
| citrix@adc | shell sockstat -4 | grep telnetd | CLI | |
| citrix@adc | shell uptime | CLI | |
| citrix@adc | show cluster instance | CLI | |
| citrix@adc | show ns hostname | CLI | |
| citrix@adc | show ns ip -format TEXT | CLI | |
| citrix@adc | show ns stats | CLI | |
| citrix@adc | show partition | CLI | |
| citrix@adc | switch partition | CLI | |
| dell@ftos | show memory | CLI | |
| dell@ftos | show running-config | grep ^hostname | CLI | |
| dell@ftos | show system stack-unit 0 | CLI | |
| dell@ftos | show system stack-unit 1 | CLI | |
| dell@ftos | show version | CLI | |
| dell@os10 | show inventory | CLI | |
| dell@os10 | show processes node-id <nodeId> | CLI | |
| dell@os10 | show running-configuration | CLI | |
| dell@os10 | show system | CLI | |
| dell@os10 | show version | CLI | |
| dell@powerconnect | show ip telnet | CLI | |
| dell@powerconnect | show memory cpu | CLI | |
| dell@powerconnect | show system | CLI | |
| dell@powerconnect | show version | CLI | |
| dlink@des3000 | show switch | CLI | |
| dlink@des3000 | show utilization dram | CLI | |
| dlink@dgs1210 | show switch | CLI | |
| dlink@dgs1250 | show unit | CLI | |
| dlink@dgs1250 | show version | CLI | |
| extreme@boss | show lldp local-sys-data | CLI | |
| extreme@boss | show memory-utilization | CLI | |
| extreme@boss | show spanning-tree mstp status | CLI | |
| extreme@boss | show sys-info | CLI | |
| extreme@boss | show system verbose | CLI | |
| extreme@boss | show telnet-access | CLI | |
| extreme@enterasys | show system | CLI | |
| extreme@enterasys | show system hardware | CLI | |
| extreme@enterasys | show system utilization storage | CLI | |
| extreme@enterasys | show telnet | CLI | |
| extreme@exos | show management | CLI | |
| extreme@exos | show memory | CLI | |
| extreme@exos | show switch | CLI | |
| extreme@exos | show version | CLI | |
| extreme@voss | show boot config flags | CLI | |
| extreme@voss | show khi performance memory | CLI | |
| extreme@voss | show lldp local-sys-data | CLI | |
| extreme@voss | show sys-info | CLI | |
| f5@big-ip | list auth partition | CLI | |
| f5@big-ip | list net self | CLI | |
| f5@big-ip | list net self recursive | CLI | |
| f5@big-ip | run util bash -c "clsh tmsh show sys hardware" | CLI | |
| f5@big-ip | run util bash -c uptime | CLI | |
| f5@big-ip | show cm device | CLI | |
| f5@big-ip | show sys hardware | CLI | |
| f5@big-ip | show sys tmm-info raw | CLI | |
| f5@big-ip | show sys version | CLI | |
| f5@f5osa | GET /data/f5-tenants:tenants | API | |
| f5@f5osa | GET /data/openconfig-platform:components/component=platform/state | API | |
| f5@f5osa | GET /data/openconfig-system:system/state | API | |
| f5@f5osc | GET /data/openconfig-interfaces:interfaces | API | |
| f5@f5osc | GET /data/openconfig-platform:components | API | |
| f5@f5osc | GET /data/openconfig-system:system/f5-system-redundancy:redundancy | API | |
| forcepoint@ngfw | cat /proc/meminfo | CLI | |
| forcepoint@ngfw | date | CLI | |
| forcepoint@ngfw | sg-status -l | CLI | |
| fortinet@fortigate | diagnose hardware devinfo nic <intName> | CLI | |
| fortinet@fortigate | diagnose load-balance status | CLI | |
| fortinet@fortigate | execute sensor list | CLI | |
| fortinet@fortigate | get hardware memory | CLI | |
| fortinet@fortigate | get system interface physical | CLI | |
| fortinet@fortigate | get system interface transceiver | CLI | |
| fortinet@fortigate | get system interface transceiver <intName> | CLI | |
| fortinet@fortigate | get system performance status | CLI | |
| fortinet@fortigate | get system status | CLI | |
| fortinet@fortigate | show system interface | CLI | |
| fortinet@fortiswitch | diagnose switch physical-ports list | CLI | |
| fortinet@fortiswitch | get hardware memory | CLI | |
| fortinet@fortiswitch | get system performance status | CLI | |
| fortinet@fortiswitch | get system status | CLI | |
| fortinet@fortiswitch | show system interface | CLI | |
| frr | show version | CLI | |
| fs@fsos | show ip sockets | CLI | |
| fs@fsos | show memory | CLI | |
| fs@fsos | show processes memory sorted | CLI | |
| fs@fsos | show reboot-info | CLI | |
| fs@fsos | show reboot-reason all | CLI | |
| fs@fsos | show route-mac | CLI | |
| fs@fsos | show services | CLI | |
| fs@fsos | show sysmac | CLI | |
| fs@fsos | show system summary | CLI | |
| fs@fsos | show tcp connect | CLI | |
| fs@fsos | show version | CLI | |
| gcp | GET cloudasset.googleapis.com/v1/projects/<project>:searchAllResources | API | |
| gcp | GET cloudresourcemanager.googleapis.com/v1/projects | API | |
| gcp | GET compute.googleapis.com/compute/v1/projects/<project>/aggregated/backendServices | API | |
| gcp | GET compute.googleapis.com/compute/v1/projects/<project>/aggregated/routers | API | |
| gcp | GET compute.googleapis.com/compute/v1/projects/<project>/aggregated/targetPools | API | |
| gcp | GET compute.googleapis.com/compute/v1/projects/<project>/aggregated/targetVpnGateways | API | |
| gcp | GET compute.googleapis.com/compute/v1/projects/<project>/aggregated/urlMaps | API | |
| gcp | GET compute.googleapis.com/compute/v1/projects/<project>/aggregated/vpnGateways | API | |
| gcp | GET compute.googleapis.com/compute/v1/projects/<project>/global/networks | API | |
| hpe@3com | display device manuinfo | CLI | |
| hpe@3com | display memory | CLI | |
| hpe@3com | display tcp status | CLI | |
| hpe@3com | display version | CLI | |
| hpe@aruba | GET /network-monitoring/v1/devices | API | the tasker builds the ver from this call; the task sends no request of its own |
| hpe@aruba | show hostname | CLI | |
| hpe@aruba | show inventory | CLI | |
| hpe@aruba | show slots | CLI | |
| hpe@aruba | show telnet | CLI | |
| hpe@aruba | show version | CLI | |
| hpe@aruba-iap | GET /network-monitoring/v1/devices | API | the tasker builds the ver from this call; the task sends no request of its own |
| hpe@aruba-iap | show summary | CLI | |
| hpe@aruba-iap | show version | CLI | |
| hpe@arubacx | GET /network-monitoring/v1/devices | API | the tasker builds the ver from this call; the task sends no request of its own |
| hpe@arubacx | show boot-history | CLI | |
| hpe@arubacx | show images | CLI | |
| hpe@arubacx | show lldp local-device | CLI | |
| hpe@arubacx | show module | CLI | |
| hpe@arubacx | show system | CLI | |
| hpe@arubacx | top memory | CLI | |
| hpe@arubasw | GET /network-monitoring/v1/devices | API | the tasker builds the ver from this call; the task sends no request of its own |
| hpe@arubasw | show console | CLI | the members of a 5400R chassis are collected by "show vsf detail", the rest of the family uses "show stacking" |
| hpe@arubasw | show lldp info local-device | CLI | the members of a 5400R chassis are collected by "show vsf detail", the rest of the family uses "show stacking" |
| hpe@arubasw | show modules | CLI | the members of a 5400R chassis are collected by "show vsf detail", the rest of the family uses "show stacking" |
| hpe@arubasw | show stacking | CLI | the members of a 5400R chassis are collected by "show vsf detail", the rest of the family uses "show stacking" |
| hpe@arubasw | show system | CLI | the members of a 5400R chassis are collected by "show vsf detail", the rest of the family uses "show stacking" |
| hpe@arubasw | show tech buffer | CLI | the members of a 5400R chassis are collected by "show vsf detail", the rest of the family uses "show stacking" |
| hpe@arubasw | show vsf detail | CLI | the members of a 5400R chassis are collected by "show vsf detail", the rest of the family uses "show stacking" |
| hpe@comware | display device manuinfo | CLI | * display tcp - supported by Comware version 7 * display tcp status - supported by Comware version 5 * display wlan ap all verbose - we need to determine WLC as devType |
| hpe@comware | display lldp local-information global | CLI | * display tcp - supported by Comware version 7 * display tcp status - supported by Comware version 5 * display wlan ap all verbose - we need to determine WLC as devType |
| hpe@comware | display memory | CLI | * display tcp - supported by Comware version 7 * display tcp status - supported by Comware version 5 * display wlan ap all verbose - we need to determine WLC as devType |
| hpe@comware | display tcp | CLI | * display tcp - supported by Comware version 7 * display tcp status - supported by Comware version 5 * display wlan ap all verbose - we need to determine WLC as devType |
| hpe@comware | display version | CLI | * display tcp - supported by Comware version 7 * display tcp status - supported by Comware version 5 * display wlan ap all verbose - we need to determine WLC as devType |
| hpe@comware | display wlan ap all verbose | CLI | * display tcp - supported by Comware version 7 * display tcp status - supported by Comware version 5 * display wlan ap all verbose - we need to determine WLC as devType |
| huawei@vrp | display telnet server status | CLI | * display telnet server - used for VRP version 8 * display telnet server status - used for VRP version 5 |
| huawei@vrp | display device | CLI | * display telnet server - used for VRP version 8 * display telnet server status - used for VRP version 5 |
| huawei@vrp | display device manufacture-info | CLI | * display telnet server - used for VRP version 8 * display telnet server status - used for VRP version 5 |
| huawei@vrp | display lldp local | include Chassis | CLI | * display telnet server - used for VRP version 8 * display telnet server status - used for VRP version 5 |
| huawei@vrp | display memory | CLI | * display telnet server - used for VRP version 8 * display telnet server status - used for VRP version 5 |
| huawei@vrp | display telnet server | CLI | * display telnet server - used for VRP version 8 * display telnet server status - used for VRP version 5 |
| huawei@vrp | display version | CLI | * display telnet server - used for VRP version 8 * display telnet server status - used for VRP version 5 |
| juniper@junos | show chassis hardware | CLI | |
| juniper@junos | show chassis routing-engine | CLI | |
| juniper@junos | show configuration | display set | CLI | |
| juniper@junos | show system connections | CLI | |
| juniper@junos | show system uptime | CLI | |
| juniper@junos | show version | CLI | |
| juniper@mist | GET /orgs/<orgId>/stats/devices?type=ap&status=connected | API | |
| juniper@mist | GET /self | API | |
| juniper@mist | GET /sites/<siteId>/stats/devices/<id> | API | |
| juniper@mist | GET /sites/<siteId>/stats/ports/search | API | |
| mikrotik@routeros | /interface print detail | CLI | |
| mikrotik@routeros | /ip service print detail without-paging | CLI | |
| mikrotik@routeros | /system license print without-paging | CLI | |
| mikrotik@routeros | /system resource print without-paging | CLI | |
| mikrotik@routeros | /system routerboard print without-paging | CLI | |
| nokia@timos | show bof booted | CLI | |
| nokia@timos | show card detail | CLI | |
| nokia@timos | show chassis | CLI | |
| nokia@timos | show chassis detail | CLI | |
| nokia@timos | show mda detail | CLI | |
| nokia@timos | show sfm detail | CLI | |
| nokia@timos | show system information | CLI | |
| nokia@timos | show system lldp | CLI | |
| nokia@timos | show system memory-pools | CLI | |
| opengear@og | cat /proc/cpuinfo | CLI | |
| opengear@og | cat /proc/meminfo | CLI | |
| opengear@og | check_version | CLI | |
| opengear@og | hostname | CLI | |
| opengear@og | setfset | CLI | |
| opengear@og | sudo lldpcli show chassis | CLI | |
| opengear@og | uptime | CLI | |
| opengear@og-om | cat /proc/cpuinfo | CLI | |
| opengear@og-om | cat /proc/meminfo | CLI | |
| opengear@og-om | hostname | CLI | |
| opengear@og-om | ogcli get monitor/lldp/chassis | CLI | |
| opengear@og-om | ogcli get system/info | CLI | |
| opengear@og-om | uptime | CLI | |
| paloalto@pan-os | show high-availability state | CLI | |
| paloalto@pan-os | show system info | CLI | |
| paloalto@pan-os | show system resources | CLI | |
| paloalto@pan-os | show system services | CLI | |
| paloalto@pan-os | show system state filter sw.mprelay.s1.dp0.vsys.stats.session | CLI | |
| paloalto@prisma | GET /sdwan/v2.6/api/elements | API | |
| quagga | show version | CLI | |
| riverbed@steelhead | show hosts | CLI | |
| riverbed@steelhead | show info | CLI | |
| riverbed@steelhead | show telnet-server | CLI | |
| riverbed@steelhead | show version | CLI | |
| ruckus@vsz | GET /aps/<mac>/operational/summary | API | |
| ruckus@vsz | GET /controller | API | |
| silverpeak@unity | GET /gms/rest/action/status?key=<statusKey> | API | |
| silverpeak@unity | GET /gms/rest/appliance | API | |
| silverpeak@unity | POST /gms/rest/broadcastCli cmdList: "show version" | API | |
| stormshield@sn | getmodel -a | CLI | |
| stormshield@sn | getversion | CLI | |
| stormshield@sn | hainfo | CLI | |
| stormshield@sn | hostname | CLI | |
| stormshield@sn | sysctl hw.model hw.realmem vm.vmtotal | CLI | |
| stormshield@sn | uptime | CLI | |
| versa@vos | /vnms/dashboard/appliance/<appliance>/live?command=lldp/neighbor/detail/interface-detail&uuid=<uuid> | API | |
| versa@vos | GET /vnms/appliance/appliance?offset=0&limit=2500 | API | |
| versa@vos | GET /vnms/dashboard/appliance/<appliance>/live?command=system/uptime | API | |
| vmware@nsx-t | GET /api/v1/cluster/node/version | API | |
| vmware@nsx-t | GET /policy/api/v1/infra/tier-0s | API | |
| vmware@nsx-t | GET /policy/api/v1/infra/tier-1s | API | |
| vmware@velocloud | POST /enterprise/getEnterpriseEdges | API | |
| zpe@nodegrid | show /system/about/ | CLI |