Back to Overview
List of Commands for Task Initial device discovery
Device type detection and CLI terminal setting
| VENDOR / FAMILY | COMMAND | TRANSPORT | NOTES |
|---|---|---|---|
| alcatel@aos | show version | CLI | |
| arista@eos | show cvx | CLI | |
| arista@eos | show privilege | CLI | |
| arista@eos | show version | CLI | |
| arista@eos | terminal width 256 | CLI | |
| avocent@acs | show /system/information/ | CLI | |
| aws | SDK directconnect:DescribeDirectConnectGatewaysCommand | API | |
| aws | SDK ec2:DescribeNatGatewaysCommand | API | |
| aws | SDK ec2:DescribeTransitGatewaysCommand | API | |
| aws | SDK ec2:DescribeVpcsCommand | API | |
| aws | SDK ec2:DescribeVpnGatewaysCommand | API | |
| azure | GET /expressRouteGateways | API | |
| azure | GET /natGateways | API | |
| azure | GET /virtualHubs | API | |
| azure | GET /virtualNetworkGateways | API | |
| azure | GET /virtualNetworks | API | |
| azure | GET /vpnGateways | API | |
| brocade@fastiron | show version | CLI | |
| brocade@fastiron | show who | CLI | |
| brocade@fastiron | skip-page-display | CLI | |
| checkpoint@gaia | clish | CLI | "show asset <memory | network | system>" would run only if "show asset all" failed |
| checkpoint@gaia | g_all asg stat -i tasks | CLI | "show asset <memory | network | system>" would run only if "show asset all" failed |
| checkpoint@gaia | POST /web_api/show-gateways-and-servers | API | |
| checkpoint@gaia | set blade-range <site-id>_<member-id> | CLI | "show asset <memory | network | system>" would run only if "show asset all" failed |
| checkpoint@gaia | set virtual-system <id> | CLI | "show asset <memory | network | system>" would run only if "show asset all" failed |
| checkpoint@gaia | show asset all | CLI | "show asset <memory | network | system>" would run only if "show asset all" failed |
| checkpoint@gaia | show asset memory | CLI | "show asset <memory | network | system>" would run only if "show asset all" failed |
| checkpoint@gaia | show asset network | CLI | "show asset <memory | network | system>" would run only if "show asset all" failed |
| checkpoint@gaia | show asset system | CLI | "show asset <memory | network | system>" would run only if "show asset all" failed |
| checkpoint@gaia | show interfaces all | CLI | "show asset <memory | network | system>" would run only if "show asset all" failed |
| checkpoint@gaia | show security-gateway policy | CLI | "show asset <memory | network | system>" would run only if "show asset all" failed |
| checkpoint@gaia | show virtual-system all | CLI | "show asset <memory | network | system>" would run only if "show asset all" failed |
| checkpoint@gaia | show vsx | CLI | "show asset <memory | network | system>" would run only if "show asset all" failed |
| checkpoint@gaia | ver | CLI | "show asset <memory | network | system>" would run only if "show asset all" failed |
| checkpoint@gaia-embedded | POST /web_api/show-gateways-and-servers | API | |
| checkpoint@gaia-embedded | show interface <name> | CLI | |
| checkpoint@gaia-embedded | show interface all | CLI | |
| checkpoint@gaia-embedded | show security-management | CLI | |
| checkpoint@gaia-embedded | ver | CLI | |
| cisco@aci | acidiag fnvread | CLI | |
| cisco@aci | show inventory | CLI | |
| cisco@aci | show version | CLI | |
| cisco@apic | cat /sys/class/dmi/id/product_name | CLI | |
| cisco@apic | show controller detail | CLI | |
| cisco@asa | changeto context <context> | CLI | |
| cisco@asa | enable | CLI | |
| cisco@asa | show context | CLI | |
| cisco@asa | show curpriv | CLI | |
| cisco@asa | show version | CLI | |
| cisco@encs | screen-width 0 | CLI | |
| cisco@ftd | show version | CLI | |
| cisco@ios | show privileges | CLI | |
| cisco@ios | show version | CLI | |
| cisco@ios-xe | show ap summary | CLI | 'show ap summary' used only on some platforms to detect WLC capability |
| cisco@ios-xe | show privileges | CLI | |
| cisco@ios-xe | show version | CLI | 'show ap summary' used only on some platforms to detect WLC capability |
| cisco@ios-xr | show version | CLI | |
| cisco@meraki | GET /organizations | API | |
| cisco@meraki | GET /organizations/<organizationId> | API | |
| cisco@meraki | GET /organizations/<organizationId>/devices | API | |
| cisco@meraki | GET /organizations/<organizationId>/devices/availabilities | API | |
| cisco@meraki | GET /organizations/<organizationId>/devices/uplinks | API | |
| cisco@meraki | GET /organizations/<organizationId>/networks | API | |
| cisco@nx-os | show inventory [all] | CLI | nx9000 - show inventory all, otherwise show inventory |
| cisco@nx-os | show user-account | CLI | nx9000 - show inventory all, otherwise show inventory |
| cisco@nx-os | show version | CLI | nx9000 - show inventory all, otherwise show inventory |
| cisco@nx-os | terminal width 256 | CLI | nx9000 - show inventory all, otherwise show inventory |
| cisco@sg | enable | CLI | |
| cisco@sg | show inventory | CLI | |
| cisco@sg | show privileges | CLI | |
| cisco@sg | show version | CLI | |
| cisco@viptela | GET /dataservice/dataservice/device | API | |
| cisco@viptela | GET /dataservice/device/arp?deviceId=<deviceId> | API | |
| cisco@viptela | GET /dataservice/system/device/controllers | API | |
| cisco@viptela | GET /dataservice/system/device/vedges | API | |
| cisco@viptela | paginate false | CLI | |
| cisco@viptela | show control local-properties | nomore | CLI | |
| cisco@viptela | show privilege | CLI | |
| cisco@viptela | show sdwan control local-properties | CLI | |
| cisco@viptela | terminal length 0 | CLI | |
| cisco@wlc-air | show inventory | CLI | |
| cisco@wlc-air | show version | CLI | |
| citrix@adc | show ns hardware | CLI | |
| citrix@adc | show version | CLI | |
| citrix@adc | switch partition default | CLI | |
| dell@ftos | enable | CLI | |
| dell@ftos | show version | CLI | |
| dell@os10 | show version | CLI | |
| dell@powerconnect | enable | CLI | |
| dell@powerconnect | show version | CLI | |
| dlink@des3000 | show switch | CLI | |
| dlink@dgs1210 | show switch | CLI | |
| dlink@dgs1250 | enable | CLI | |
| dlink@dgs1250 | show privilege | CLI | |
| dlink@dgs1250 | show version | CLI | |
| extreme@boss | show sys-info | CLI | |
| extreme@boss | terminal length 0 | CLI | |
| extreme@boss | terminal width 132 | CLI | |
| extreme@enterasys | show system hardware | CLI | |
| extreme@exos | show version | CLI | |
| extreme@voss | show sys-info | CLI | |
| extreme@voss | terminal more disable | CLI | |
| f5@big-ip | run util bash -c "clsh tmsh show sys hardware" | CLI | |
| f5@big-ip | show sys hardware | CLI | |
| f5@big-ip | show sys version | CLI | |
| f5@big-ip | tmsh | CLI | |
| f5@f5osa | GET /data/openconfig-platform:components/component=platform/state | API | |
| f5@f5osa | GET /data/openconfig-system:system/f5-system-install:install/state | API | |
| f5@f5osc | GET /data/f5-system-image:image/controller | API | |
| f5@f5osc | GET /data/f5-system-partition:partitions?with-defaults=report-all | API | |
| f5@f5osc | GET /data/openconfig-platform:components | API | |
| f5@f5osc | GET /data/openconfig-system:system/f5-system-redundancy:redundancy | API | |
| forcepoint@ngfw | sg-version | CLI | |
| fortinet@fortigate | config global | CLI | |
| fortinet@fortigate | config vdom | CLI | |
| fortinet@fortigate | diagnose sys ha fib | CLI | |
| fortinet@fortigate | edit <vdom> | CLI | |
| fortinet@fortigate | get system status | CLI | |
| fortinet@fortigate | get system vdom-property | CLI | |
| fortinet@fortiswitch | get system status | CLI | |
| frr | no terminal paginate | CLI | |
| frr | show version | CLI | |
| fs@fsos | enable | CLI | |
| fs@fsos | show version | CLI | |
| fs@fsos | terminal length 0 | CLI | |
| fs@fsos | terminal width 0 | CLI | |
| gcp | GET cloudresourcemanager.googleapis.com/v1/projects | API | |
| gcp | GET compute.googleapis.com/compute/v1/projects/<project>/aggregated/backendServices | API | |
| gcp | GET compute.googleapis.com/compute/v1/projects/<project>/aggregated/routers | API | |
| gcp | GET compute.googleapis.com/compute/v1/projects/<project>/aggregated/targetPools | API | |
| gcp | GET compute.googleapis.com/compute/v1/projects/<project>/aggregated/targetVpnGateways | API | |
| gcp | GET compute.googleapis.com/compute/v1/projects/<project>/aggregated/urlMaps | API | |
| gcp | GET compute.googleapis.com/compute/v1/projects/<project>/aggregated/vpnGateways | API | |
| gcp | GET compute.googleapis.com/compute/v1/projects/<project>/global/networks | API | |
| hpe@3com | display version | CLI | |
| hpe@3com | undo terminal monitor | CLI | |
| hpe@aruba | GET /network-monitoring/v1/devices | API | the tasker builds the ver from these calls; an MSP login first lists tenants with GET /workspaces/v1/msp-tenants |
| hpe@aruba | GET /network-monitoring/v1/switches | API | the tasker builds the ver from these calls; an MSP login first lists tenants with GET /workspaces/v1/msp-tenants |
| hpe@aruba | show version | CLI | |
| hpe@aruba-iap | GET /network-monitoring/v1/devices | API | the tasker builds the ver from these calls; an MSP login first lists tenants with GET /workspaces/v1/msp-tenants |
| hpe@aruba-iap | GET /network-monitoring/v1/switches | API | the tasker builds the ver from these calls; an MSP login first lists tenants with GET /workspaces/v1/msp-tenants |
| hpe@aruba-iap | show summary | CLI | |
| hpe@aruba-iap | show version | CLI | |
| hpe@arubacx | GET /network-monitoring/v1/devices | API | the tasker builds the ver from these calls; an MSP login first lists tenants with GET /workspaces/v1/msp-tenants |
| hpe@arubacx | GET /network-monitoring/v1/switches | API | the tasker builds the ver from these calls; an MSP login first lists tenants with GET /workspaces/v1/msp-tenants |
| hpe@arubacx | show system | CLI | |
| hpe@arubasw | GET /network-monitoring/v1/devices | API | the tasker builds the ver from these calls; an MSP login first lists tenants with GET /workspaces/v1/msp-tenants |
| hpe@arubasw | GET /network-monitoring/v1/switches | API | the tasker builds the ver from these calls; an MSP login first lists tenants with GET /workspaces/v1/msp-tenants |
| hpe@arubasw | show lldp info local-device | CLI | |
| hpe@arubasw | show modules | CLI | |
| hpe@arubasw | show stacking | CLI | |
| hpe@arubasw | show tech buffers | CLI | |
| hpe@arubasw | show version | CLI | |
| hpe@comware | _cmdline-mode on | CLI | |
| hpe@comware | display version | CLI | |
| hpe@comware | summary | CLI | |
| huawei@vrp | display version | CLI | |
| huawei@vrp | screen-length 0 temporary | CLI | |
| juniper@junos | set cli screen-width 0 | CLI | |
| juniper@junos | show version | CLI | |
| juniper@mist | GET /orgs/<orgId>/stats/devices?type=ap&status=connected | API | |
| juniper@mist | GET /self | API | |
| mikrotik@routeros | /system resource print | CLI | |
| nokia@timos | environment no more | CLI | |
| nokia@timos | show system information | CLI | |
| nokia@timos | show version | CLI | |
| opengear@og | check_version | CLI | |
| opengear@og | setfset | CLI | |
| opengear@og-om | ogcli get system/info | CLI | |
| paloalto@pan-os | set system setting target-vsys <vsysName> | CLI | |
| paloalto@pan-os | set system setting target-vsys none | CLI | |
| paloalto@pan-os | show config merged | CLI | |
| paloalto@pan-os | show system info | CLI | |
| paloalto@pan-os | show system state filter sw.mprelay.s1.dp0.vsys.stats.session | CLI | |
| paloalto@prisma | GET /sdwan/v2.6/api/elements | API | |
| quagga | show version | CLI | |
| quagga | terminal length 0 | CLI | |
| riverbed@steelhead | enable | CLI | |
| riverbed@steelhead | show info | CLI | |
| riverbed@steelhead | show version | CLI | |
| ruckus@vsz | GET /aps/<apMac>/operational/summary | API | |
| ruckus@vsz | GET /controller | API | |
| silverpeak@unity | GET /gms/rest/appliance | API | |
| silverpeak@unity | GET /gms/rest/gms/versions | API | |
| stormshield@sn | getmodel -a | CLI | |
| stormshield@sn | getversion | CLI | |
| versa@vos | GET /vnms/appliance/appliance?offset=0&limit=2500 | API | |
| versa@vos | set paginate false | CLI | |
| versa@vos | show system details | nomore | CLI | |
| vmware@nsx-t | GET /api/v1/logical-routers | API | |
| vmware@nsx-t | GET /api/v1/node/version | API | |
| vmware@velocloud | POST /enterprise/getEnterprise | API | |
| zpe@nodegrid | cli show /system/about/ | CLI | |
| zpe@nodegrid | PATH=$PATH:/usr/local/sbin:/usr/sbin:/sbin cli | CLI | |
| zpe@nodegrid | show /system/about/ | CLI |